Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
75,171 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

88 Commits

Author SHA1 Message Date
thorpej 2663816278 Fix register offset botch when setting the multicast filter on 
the ADMtek AN985.
 2001-01-16 17:33:24 +00:00
thorpej 7bebf9a408 On ADMtek chips, don't just idle the chip when programming the 
multicast filter.  These chips don't like to go into "idle" state
very much, so we have to use the big hammer and reset the chip,
instead.
 2001-01-08 22:12:57 +00:00
thorpej e9bb880aaf The ADMtek AN985 "ghosts" the single built-in PHY at every MII address. 
Work around this by having a custom media init routine that limits the
search to MII address 1.
 2001-01-08 21:40:29 +00:00
thorpej b79ddef845 Also ignore receiver errors if VLAN_MTU is enabled; the 21040 appears 
to require this.
 2001-01-07 23:29:12 +00:00
thorpej ba4b6847df Fix a problem with the ALTQ changes that can cause bogus memory 
refernces.  Problem reported by Luke Mewburn.
 2000-12-19 00:06:01 +00:00
thorpej 6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
takemura 3c9d9276dc Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and 
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
 2000-11-26 11:08:57 +00:00
thorpej b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
thorpej 4318834442 Don't trim off the FCS, pass it up. 2000-10-15 19:56:31 +00:00
thorpej 2198741306 Use ether_ioctl(). 2000-10-11 16:57:45 +00:00
onoe fcde56c9ba Add flags to indicate that tlp_init() should set some more BUSMODE bits. 
TULIPF_BLE	/* data is big endian */
	TULIPF_DBO	/* descriptor is big endian */
These setting is required for Big-endian bus front-end (such as APbus for
newsmips) to work with tulip.  Also,
	sc_maxburst
member is added to the tulip_softc to limit the maximum burst length.
This member defaults to zero which means no restriction for burst length.
 2000-10-11 14:59:52 +00:00
enami db6fba6bdf Move inclusion of rnd.h and sys/rnd.h from tulip.c to tulipvar.h. 2000-10-09 14:31:01 +00:00
enami ca88e2b6bd Make tulip a random source. 2000-10-09 12:54:28 +00:00
bouyer 2e6cb6a878 When 802.1Q MTU, we have to ignore the Frame Too Long errors, and there's no 
need to disable RWT and JAB.
 2000-10-05 07:22:43 +00:00
thorpej 5fcde4924f Support ETHERCAP_VLAN_MTU by igorning Receive Watchdog and Transmit Jabber 
errors if VLANs are configured on the interface.
 2000-10-03 23:35:55 +00:00
thorpej 7edd5d54bc Add support for the ADMtek AN983 and AN985. 2000-10-03 04:32:00 +00:00
thorpej 7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(), 
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
 2000-10-01 23:32:39 +00:00
castor b6dd28b4ce Support some differences in the Macronix 98715AEC-C and E chips from the other 
98715* series.

The MX98715AEC-[C,E] use a different location in the serial eerom for
LED control, and programming it with the original location's values
caused unpredictable behavior.

Also, start integrating fixes where media changes on an adapter
under load may fail.  There's more work to be done here, but I need
to sort out our internal changes a little more carefully.
 2000-08-03 03:07:30 +00:00
thorpej a02e08bf4f Remove work-around for Lite-On PNIC in tlp_filter_setup() that is 
apparently no longer necessary (probably due to other fixes that
have happened in the filter setup path) and is in fact harmful.

Based on a patch from Krister Walfridsson, who claims this makes
his newer NetGear FA-310TX work (although, my older NetGear FA-310TX
still does not, but fails in an entirely different way).
 2000-07-04 04:18:17 +00:00
mrg 314f1e97c5 remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h> 2000-06-28 17:12:48 +00:00
thorpej 8a3725612d Add support for the Davicom DM9102 and DM9102A 10/100 Ethernet chips. 
Partially based on diffs submitted by Matthew Orgass <darkstar@pgh.net>
and IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>.
 2000-05-26 16:38:13 +00:00
thorpej f4a3f5ea48 So, while the DEC chips and other clones want no FS|LS in the 
setup descriptor, apparently the Xircom X3201-3 requires it.
 2000-05-25 18:46:07 +00:00
thorpej 2f08658512 Fix a couple of typos in debugging messages. From IWAMOTO Toshihiro, 
kern/10194.
 2000-05-25 16:37:33 +00:00
thorpej 05a766d42e Don't set FS and LS in the setup packet descriptor. From 
IWAMOTO Toshihiro <iwamoto@sat.t.u-tokyo.ac.jp>, kern/10194,
and confirmed with the 21040 manual.
 2000-05-25 16:36:03 +00:00
thorpej b5cf4e96cf Use big-endian CRC on ADMtek multicast hash. 2000-05-18 03:02:45 +00:00
thorpej d6c07323b2 If using ring-mode, don't update the receive descriptor list base address 
when a receive overrun occurs.  From Castor Fu <castor@geocast.com>.
 2000-05-12 17:09:27 +00:00
thorpej 6e4b4f6954 Use ether_crc32_le(). 2000-05-12 16:45:42 +00:00
thorpej 0ed7436590 Add a patchable variable `tlp_srom_debug' that enables dumping of 
SROM output, etc.
 2000-04-07 18:58:15 +00:00
thorpej 5a41b5bf56 - if_tlp_cardbus.c: Use the `pmreg' pointer passed by by 
cardbus_get_capability() [mirror change already made to if_tlp_pci.c]
- if_tlp_cardbus.c: If we don't find an ISV SROM, try to grab the
  Ethernet address from the CIS.
- if_tlp_cardbus.c: set CardBus cards to store-and-forward mode from
  the get-go.
- Put the TxThresh tables in tulipvar.h, and use them in the CardBus
  and PCI front-ends to go to store-and-forward mode.
- Document the Xircom X3201-3 clone a little more.
 2000-04-04 19:22:50 +00:00
mycroft b1c28384dc If the SROM size is to far out of range, issue a diagnostic and set the size 
to 1Kb.  Some boards (e.g. my SMC9332) have a broken MicroWire interface.
 2000-04-02 23:38:05 +00:00
thorpej dc680eb373 Slight correction to last: really only do it if it's a 21142 or 21143. 2000-04-02 19:02:34 +00:00
mycroft 229fcf5bbe When using MII on 2114[23] chips, zero the SIA TXRX register to disable the 
internal Nway engine.  This fixed a major performance problem.
Thanks to Matt Thomas for pointing this out.
 2000-04-02 17:23:33 +00:00
thorpej fc96443d15 New callout mechanism with two major improvements over the old 
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
  resource allocation.
- Insertion and removal of callouts is constant time, important as
  this facility is used quite a lot in the kernel.

The old timeout()/untimeout() API has been removed from the kernel.
 2000-03-23 07:01:25 +00:00
thorpej 92d27d3c2e Get rid of the powerhook when we detach. 2000-03-20 07:52:58 +00:00
thorpej 92c19e5ff7 Add suspend/resume hooks to ensure that the chip doesn't scramble memory 
after an APM suspend and is unsnoozed after an APM resume.
 2000-03-19 21:45:23 +00:00
thorpej c38405d33d Add power management support to the `tlp' driver. The battery on my 
laptop lasts a whole lot longer now.
 2000-03-15 18:39:50 +00:00
thorpej 0391e3393f Slight change to the SROM size printf. 2000-03-10 02:46:39 +00:00
enami c1b54794fc Add missing `cnt++'. 2000-03-07 03:37:39 +00:00
enami 7ce8a9f46b Also, fix indentation in previous commit. 2000-03-07 03:34:52 +00:00
soren dfaacf6eab Fix bug in previous. 2000-03-07 01:08:55 +00:00
soren 6cc1408bca Only print SROM size if TLP_DEBUG. 2000-03-07 01:06:12 +00:00
mycroft 5eee9ca94c Determine the size of the SROM by probing the chip using the standard Microwire 
protocol.  Eliminates the need for srom_quirks and some other trash.
 2000-03-07 00:39:17 +00:00
thorpej a6f861574a No longer necessary to futz with ifp->if_baudrate here. 2000-03-06 21:02:00 +00:00
enami 9066b12bbb Remove redundant assignment. 2000-03-06 10:21:46 +00:00
thorpej eed75dbc26 Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass 
flags down from the parent to child vi mii_attach().
 2000-02-02 17:09:38 +00:00
thorpej 84dc99fdea Bring some order to the chaos which was the MII code function naming 
"conventions".
 2000-02-02 08:05:26 +00:00
thorpej 001748dc57 First cut at detach support; doens't fully work yet. 2000-02-01 22:54:47 +00:00
thorpej a72f993570 When possible, use ring mode for descriptors. Not only is this slightly 
more efficient on genuine DEC chips, but some clones apparently Lose Badly
if you use chain mode.  To further complicate things, some clones *only*
do chain mode, so make this whole mess conditional.
 2000-01-28 23:23:49 +00:00
thorpej 59fbdbb7cb Just use a regular Tx descriptor for the setup packet; don't bother with 
a separate one.
 2000-01-28 22:23:58 +00:00
thorpej 62fb37ba49 Some changes for the Xircom X3201-3 in 21143 emulation mode: 
- The Xircom doesn't bring itself out of reset; we have to do it.
- The Xircom requires transmit buffers to be aligned to 4 bytes, too.

Partially from Rafal Boni (though the Tx buffer alignment issue is
handled much differently in this version).
 2000-01-25 22:11:12 +00:00