Commit Graph

63 Commits

Author SHA1 Message Date
abs 3388ad407f Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
2008-10-07 10:00:00 +00:00
tsutsui d6a9de7378 Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf.  Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.
2008-09-13 11:46:18 +00:00
lukem 2c1c2b60b2 Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.
2008-03-18 04:20:36 +00:00
pavel de89ac5321 Add a comment reminding to update the release notes if the list of
kernels change.
2007-07-24 10:49:23 +00:00
christos 0553899e97 remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
2004-06-20 21:30:26 +00:00
bjh21 a9e6f9057b Remove references to /dev/beep. 2004-01-25 14:00:57 +00:00
jdolecek 1b00681156 switch over to unified MAKEDEV 2003-10-24 20:12:04 +00:00
jdolecek 7a46124ea4 determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
2003-10-19 19:07:26 +00:00
jdolecek 20282f8b2e change minor of /dev/zero for ARM ports to 12, so that it is same as on other
ports; follows the kernel change
2003-10-17 17:56:28 +00:00
jdolecek 7126da0813 MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
2003-10-15 19:13:32 +00:00
jdolecek 2d42eb283b reassing majors for crypto and pf to use the newly defined MI major range 2003-10-10 22:47:10 +00:00
dsl 5c2824bce4 Revert 'console' back to /dev/console (from /dev/constty) 2003-10-04 07:41:11 +00:00
dsl e5217087d8 Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
2003-10-03 14:54:20 +00:00
dsl fca3294820 Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
2003-10-03 14:35:36 +00:00
pooka 12cd483962 add isdn telephony dialout devices 2003-09-19 11:11:37 +00:00
dsl 35bb292640 Put back port specific majors for ptys 2003-09-05 17:02:52 +00:00
dsl 818622e67a Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
2003-08-30 11:00:20 +00:00
itojun 4440262659 create /dev/crypto 2003-08-22 05:06:22 +00:00
itojun 3f14c71f75 reserve cdev major # for PF. ok'ed by technical-exec 2003-07-27 14:17:57 +00:00
wiz 5b143c1fff No point in a qms device if there is no qms driver. 2003-05-15 19:05:28 +00:00
christos e98429f32c fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.
2003-05-07 13:41:34 +00:00
ragge ce0bf5c28d Add ksyms to "std" devices. 2003-04-27 13:15:28 +00:00
fvdl 750b5b8327 Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
2003-04-17 18:03:10 +00:00
wiz 8c98a58428 Make it "Risc PC" instead of RiscPC.
Noted by Ben Harris who pointed at
	http://www.riscos.com/faqs/spelling_and_pronunciation.htm .
2003-04-14 11:57:10 +00:00
wiz c08f5994be Correct casing of RiscPC. From Igor Sobrado in PR 21144. 2003-04-14 06:32:02 +00:00
perry 2f1f870fa8 make ipl consistently "IP Filter" 2003-03-31 03:58:55 +00:00
wiz 8dab8f4d58 Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959. 2003-03-30 17:41:51 +00:00
lukem a250e57c96 Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
2003-01-03 15:34:30 +00:00
jdolecek 67705b22ff use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
2002-12-19 20:03:46 +00:00
lukem fe5f6ce974 - add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
2002-12-02 13:18:03 +00:00
lukem bc22c3f4d9 whitespace consistency cleanup 2002-10-21 04:14:47 +00:00
thorpej d0f5785ccd Add pci*. 2002-09-06 02:40:56 +00:00
lukem fa4442cae4 - in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all)  (for consistency)
2002-08-09 02:39:15 +00:00
wiz 9034f4fdf1 By default, make ugen0 in the usbs target too, as i386 and x86_64 already did. 2002-06-19 15:00:03 +00:00
wiz b097765198 Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
2002-06-18 13:40:14 +00:00
christos 4bef4356c3 Add device creation support for systrace. 2002-06-17 16:21:03 +00:00
jdolecek 074863cac2 Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.
2002-05-04 19:43:57 +00:00
lukem 2d1f93d643 - consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
  for a given platform
2002-05-02 15:09:40 +00:00
wiz 1f28a82ce5 Remove /dev/pms0 creation from ports that do not have the driver;
obsolete it on the ones that had it in the 'all' target.
2002-04-18 13:24:56 +00:00
tron ddec80a3a4 Back out last change because we now have a special disktab for the
FFS regression test.
2002-04-09 14:11:22 +00:00
tron 78e9ad7e9c Add missing "floppy288" entry required for FFS regression test. 2002-04-09 12:40:33 +00:00
thorpej bb534232a9 Give the console entry the "default" gettytab entry. 2002-04-03 02:31:32 +00:00
bjh21 3f0d7066b3 Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.
2002-03-31 16:07:53 +00:00
bjh21 b15cf8e89f Correct "makesums" calls to use the correct directory name for installation
kernels.  This should fix PR port-arm/14145.
2002-03-20 17:05:52 +00:00
martin 093f5dbc55 Rename ISDN devices, per discussion on tech-kern. The network devices
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
2002-03-16 17:03:28 +00:00
simonb f5612134fc Remove trailing semicolons from lines that don't need them.
TABify many lines.
2002-03-13 01:26:54 +00:00
lukem 6b68804273 various cleanups inspired by etc.i386/MAKEDEV:
* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
  didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
  instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)
2002-03-04 14:02:29 +00:00
atatat 681a706ec7 Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.
2002-02-25 07:34:55 +00:00
martti 8f0fa118e2 Added ttyp[g-zA-Z] (bin/15594). 2002-02-13 09:46:01 +00:00
augustss afcd602367 Create the ulpt devices that don't reset the printer on open.
(I don't get this, I could have sworn I committed these files a while ago.)
2002-02-11 14:57:31 +00:00