This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
+ It is easy to understand that memsize is added to physcal_freeend.
+ Add VERBOSE_INIT_ARM at befor/after with printf().
+ Call ddb_init() before db_machine_init().
+ Fix declered kgdb_devrate.
+ Add INCLUDE_CONFIG_FILE and UFS_DIRHASH.
+ Add white space at file-system and enabled some file-system.
+ Comment-outed un-major devices.
+ Add stuirda, uchcom, ugensa.
in boot args.
* Support NONAKA's <nonaka@netbsd.org> sdmmc.
* Add expansion target 'basix'. This is to configure GPIO to PXA MCI.
However, CardDetect is not connected as for mci of gumxtix. Therefore, it
is not possible to Insert/Remove.
* Remove white-spaces.
* Change format in comments.
foo_attach() of the each drivers. And, it is necessary to confirm whether
to be initialized in foo_match(). To avoid a dangerous configuring on the
evaluation boards.
+ Add pxartc and lcd(commented out) and pxaudc and pxamci (commented out).
lcd and pxamci not support yet.
+ Remove slhci.
+ Change name of expansion bords the console-{hw,st} from waysmall-{hw,st}.
Because The gumstix Co. changed the name.
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.
by Slava Semushin <slava.semushin@gmail.com>.
To verify that no nasty side effects of duplicate includes (or their
removal) have an effect here, I've compiled an i386/ALL kernel with
and without the patch, and the only difference in the resulting .o
files was in shifted line numbers in some assert() calls.
The comparison of the .o files was based on the output of "objdump -D".
Thanks to martin@ for the input on testing.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
determine accurately which LED to illuminate.
Instead, hook into the PCI[ABC] interrupt chains (used solely for the
USB controller) and use the disk1/disk2 LEDS to indicate general USB
activity.
Use the "Ready/Status" LED as a CPU activity indicator by hooking the
TMR0 interrupt and illuminating the LED if the CPU is non-idle.
on IXDP425 since the PHYs fail to probe my board. This may be due to
an incompatibility between the stepping A0 CPU and the microcode.
Additionally, the MAC addresses are not configured by Redboot, so more
work is needed in this area.
"The Certance CP3100 product family provides high-end disk-to-disk-to-tape
(D2D2T) functionality for small-to-medium businesses."
To software, the unit is very similar to the IQ80321 and IQ31244 eval
boards from Intel. As such, we share almost all of their code.
Onboard hardware:
- IOP321 XScale CPU. Core clock is 600MHz.
- 256MB SDRAM (not sure if that's true for all)
- Four-port Intel i31244 SATA controller. One port is connected to the
internal disk. The remaining three are available on the back-panel.
- Dual GigE ports on the back panel, using an Intel i82546EB controller.
- Two Symbios Logic 53c1010 SCSI controllers, one in host mode the other
in target mode. Both SCSI busses are available on the back panel.
Note that NetBSD does not support SCSI target mode.
- 8MB of NOR Flash, containing a fairly vanilla Redboot together with
a minimal compressed Linux image.
- Some front-panel LEDS (not supported).
- Serial console.
Contributed by Wasabi Systems, Inc.
already an attachment to the interface attribute (atapi and scsi).
Part of PR#34085, although it is the contrary to what the submitter
suggests (which shows that having both in a config file can be confusing).
This allows us to convert aucom to just another com attachment, and cleanup
some code in the com_arbus.c.
Additionally, we use a common com_cleanup routine rather than having a
zillion copies of it in the attachment points.
This has been tested on a number architectures, and it has been shown to get
close to comparable performance when COM_REGMAP is defined, and comparable
when it is not defined.
Approved by core@. Fixes PR port-evbmips/32362.
flush routine during startup. XXX: I have absolutely no idea where
this managed to pick up DCACHE_SIZE from before.
closes port-evbarm/33276 by Peter Postma
