Commit Graph

8028 Commits

Author SHA1 Message Date
soda 8ac7bdd00c changes for NEC RISCstation 2250 of arc port. 2000-06-09 04:48:12 +00:00
soda 77625cf7ec long long constant needs "LL" suffix. 2000-06-09 04:45:53 +00:00
augustss b8f4f2be87 Regen. 2000-06-09 00:21:08 +00:00
augustss def28a5cd2 Add some PCI devices found in the IOpener (commited from the IOpener itself :). 2000-06-09 00:20:18 +00:00
cgd 1e158fae9a nuke bogus use of s = spl0() / splx(s). reviewed by Jason Thorpe. 2000-06-08 22:43:15 +00:00
gmcgarry 6dd21e55a9 Make attach messages consistent with PCI drivers. Make function pointer
usage consistent with other drivers.
2000-06-08 22:15:52 +00:00
ragge 944b6966e9 Fix a transmit bug and get a little more out from the receive logic. 2000-06-08 19:58:49 +00:00
cgd 625dbd8f87 in allegedly-MI code, if we're gonna use '#pragma pack(N)', #pragma pack()
should be used to reset the packing.  (#pragma pack(4) was used here
before.  "wrong!")
2000-06-08 18:22:15 +00:00
haya b6a821f042 Change IPL when bridge's interrupt handler calls child device's
interrupt handler (This solution is not very good).
2000-06-08 10:28:28 +00:00
cgd d8dcb11d4f don't include ISA headers. these have been properly abstracted so that
the ISA headers are unnecessary, and they're used by PCI VGA.  There may
not be any ISA at all.
2000-06-08 07:01:19 +00:00
scw 295ed77595 The OPTi controller supports a 32-bit dataport after all.
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
2000-06-07 20:42:52 +00:00
ad 887d4555cd Regen. 2000-06-07 19:53:17 +00:00
ad 4837200a8c Add vendor/device ID for 3ware Escalade IDE RAID controller. 2000-06-07 19:52:07 +00:00
tsutsui 3f94f56142 Adapt struct scsipi_adapter changes. 2000-06-07 14:40:20 +00:00
mrg a67130a218 regen. 2000-06-07 09:55:22 +00:00
mrg 09b843b7f6 fix a couple of the sun entries. 2000-06-07 09:52:16 +00:00
haya dca97557cd Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition. 2000-06-07 09:02:46 +00:00
thorpej b15bbb90f9 Add missing break; 2000-06-07 04:31:49 +00:00
soren 13ed0863f8 Regen. 2000-06-07 01:58:17 +00:00
soren e2c1012576 Add Trident 9397DVD. 2000-06-07 01:57:30 +00:00
thorpej 23ef490928 Deal with the fact that tsleep() may be a macro. 2000-06-07 00:33:51 +00:00
thorpej c85d6d7ca3 Improve the Cypress name a little. 2000-06-06 22:56:06 +00:00
thorpej a452638f06 In pciide_mapreg_dma(), check to see what type the BAR is before
mapping the registers, as suggested by a comment in that function.
2000-06-06 22:47:22 +00:00
jdolecek d98bf28b13 Make the frontend print a newline (follows similar change for isa and pcmcia front-ends) 2000-06-06 20:09:20 +00:00
soren 10e30038a9 Fix braino in previous, pointed out by Jaromir. 2000-06-06 18:42:47 +00:00
soren a4f554c4ac Add CS4235 MPU id. 2000-06-06 18:08:51 +00:00
soren ba5df2479b Shorten names of VIA controllers to fit in 80 columns with versions. 2000-06-06 17:48:12 +00:00
thorpej c40fa3c4d4 Actually program the DMA mode of the drives into the Cypress
controller.  Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
2000-06-06 17:34:22 +00:00
soren 3b8b24cffe Only wait 100 ms instead of 1 s for the SEEPROM to come ready. This is
still plenty for cards with SEEPROM's and reduces the delay on platforms
without, which conveniently also avoids triggering the O2 watchdog timer.
2000-06-06 17:29:40 +00:00
soren b4b667c0a0 Make ID printing a little more robust in case of problems reading
AC97 registers.
2000-06-06 17:25:52 +00:00
soren d862695c41 Make 3Com names a little more consistent. 2000-06-06 17:21:42 +00:00
soren f0d0078f1b Add Olicom GoCard. 2000-06-06 17:19:59 +00:00
soren cd4324537d Density codes are usually given in decimal, so print them that way. 2000-06-06 17:16:02 +00:00
soren 8b0390203b Some minor diagnostics cleanups. 2000-06-06 16:41:33 +00:00
soren 63649c5744 Make the frontend print a newline. 2000-06-06 16:27:49 +00:00
soren 1ec719ccc0 Add power management hooks. 2000-06-06 16:26:57 +00:00
sommerfeld f1802cf848 Fix previous change: guard against missing subdevices of pckbc. 2000-06-06 16:21:22 +00:00
soren 4b7ec26c89 One comment too much.. 2000-06-06 16:16:36 +00:00
soren c4df411abd Add comments for a few drivers and the lines for the Tropic attachment. 2000-06-06 16:15:31 +00:00
tsutsui 499db14bcb sun3 always defines Debugger(), so don't redefine it. 2000-06-06 14:24:05 +00:00
pooka e1e9261889 fix typo 2000-06-06 14:01:40 +00:00
augustss 1c94b92bc4 Initialize pointer before doing free of it. 2000-06-06 11:36:21 +00:00
kleink 05d7f969b9 Regen. 2000-06-06 07:55:50 +00:00
kleink aed5858e8b Add the product ID for the ESS Maestro 3 modem function as well. 2000-06-06 07:55:17 +00:00
thorpej 21d9669e4f Common routines for read/writing Cypress 82c693 control registers. Needed
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
2000-06-06 03:07:39 +00:00
sommerfeld bbca3924cd Replace "timestamp" with "counter" in previous change, to avoid any
possible confusion that it has anything to do with accurate
measurement of time.

New names:
	__HAVE_CPU_COUNTER
	cpu_counter()
	cpu_hascounter()
2000-06-06 01:33:15 +00:00
sommerfeld 7497ddcce5 /dev/random code cleanups:
- Add comments about which spls apply to which data structures.
 - Consistently protect the rnd_samples queue (the queue of
unprocessed samples) at splhigh().
 - allow MD code to supply cpu_timestamp() and cpu_havetimestamp() for
an optional higher-resolution clock/roulette wheel source.
 - Collect more statistics on the pool state (keeping track of where
collected bits are going, in addition to where they came from).
 - Add RNDGETPOOLSTAT ioctl to get the additional stats.
 - Flush a few unused rndpool calls.
 - XXX XXX Cryptographic changes:
  - 32-bit rotate is:
	((val << rp->rotate) | (val >> (32 - rp->rotate))),
    not
	(val << rp->rotate) | (val >> rp->rotate)
    or
	((val << rp->rotate) | (val >> (31 - rp->rotate)))
  - Avoid overloading of rp->rotate and double-rotation of data
(which limited pool mixing somewhat; "rotate" never got above 7).
  - Be more paranoid (but probably not paranoid enough) about mixing
output back into the pool.  This is an improvement, but it needs
revisiting soon.

We should follow the spirit of some of the recommendations in
the Schneier PRNG papers:

http://www.counterpane.com/yarrow-notes.html
http://www.counterpane.com/pseudorandom_number.html

including:
 - two (or more) stage operation for better isolation between inputs
and outputs.
 - use of keyed one-way functions (probably better even than
invertible keyed functions like 3DES) at key points in the data flow,
so that breaking the PRNG is clearly as hard as breaking the function.
2000-06-05 23:42:34 +00:00
gmcgarry fc43b2daa3 Replaced by xi(4). 2000-06-05 23:21:35 +00:00
gmcgarry d0241b393f Replace references to xe with xi. Clarify description to avoid
confusion with the Xircom tlp-based cards.
2000-06-05 23:18:50 +00:00
gmcgarry 3129070fd6 New driver for Xircom CreditCard PCMCIA Ethernet. Replaces xe driver which
didn't work.  Renamed to avoid clash with next68k network driver.
2000-06-05 23:14:22 +00:00