9c6b797796
Changes for modified pmap_enter() API:
...
* Map the message buffer with access_type = VM_PROT_READ|VM_PROT_WRITE `just
because'.
* Map the file system buffers with access_type = VM_PROT_READ|VM_PROT_WRITE to
avoid possible problems with pagemove().
* Do not use VM_PROT_EXEC with either of the above.
* Map pages for /dev/mem with access_type = prot. Also, DO NOT use
pmap_kenter() for this, as we DO NOT want to lose modification information.
* Map pages in dumpsys() with VM_PROT_READ.
* Map pages in m68k mappedcopyin()/mappedcopyout() and writeback() with
access_type = prot.
* For now, bus_dma*(), pmap_map(), vmapbuf(), and similar functions still use
access_type = 0. This should probably be revisited.
1999-03-26 23:41:25 +00:00
6dbdfeab77
include GENERIC.
1999-03-26 16:40:09 +00:00
35a4f16a60
``INSTALL'' + USB doesn't work (binutils bug?).
...
So use this instead.
1999-03-26 14:58:22 +00:00
7b93dd1117
remove opt_uvm.h
1999-03-25 00:41:46 +00:00
ca5f9685bb
clean up kernel/config files files for machVM lossage.
1999-03-24 06:06:09 +00:00
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
76fa1751fe
Add a macro to check for sufficient pointer alignment in bus.h context,
...
"BUS_SPACE_ALIGNED_POINTER()".
Equal to the param.h "ALIGNED_POINTER()" normally, but obeys additional
requirements of the bus_space_xxx_n() macros. (BUS_SPACE_DEBUG)
1999-03-23 21:29:03 +00:00
3c8e65b670
Oops. macppc doesn't use PCLK as a baud rate source.
1999-03-23 18:07:19 +00:00
63b6321834
VM_MBUF_SIZE is in terms of MCLBYTES, not CLBYTES.
1999-03-23 00:31:59 +00:00
284689634e
Moved to arch/macppc/include/pci_machdep.h,v
1999-03-19 03:36:19 +00:00
49e6daa992
Moved from arch/macppc/pci/pci_machdep.h,v
1999-03-19 03:36:18 +00:00
bc533621ed
defopt MINIROOTSIZE
1999-03-17 18:59:21 +00:00
79c71e0bae
Check the accessibility before reading from configuration space.
1999-03-15 03:03:10 +00:00
07e094073c
Remove bogus comment.
1999-03-15 02:26:10 +00:00
d446fb449c
exterminate ovbcopy. patches provided by Erik Bertelsen, pr-7145
1999-03-12 22:42:30 +00:00
5023765f61
Adapt Open Firmware 3.x. 1.x and 3.x are not bug-compatible...
1999-03-05 06:21:17 +00:00
4bdf0d9244
Modify parseargs() so that device names can contain '-'.
1999-03-05 06:18:38 +00:00
c6a8ff5d24
RSS accounting.
1999-03-05 06:11:18 +00:00
624b6ac9a6
Implement the BUFCACHE kernel config option.
1999-03-01 21:32:24 +00:00
78665b6502
Increase default data size to compile libbfd without `virtual memory
...
exhausted'. Suggested by Scott Reynolds.
1999-02-27 18:32:31 +00:00
d32ed292af
defopt BUFCACHE and BUFPAGES.
1999-02-27 06:39:34 +00:00
b10dbdb37a
Initialize BAT registers in the first place.
1999-02-26 18:36:15 +00:00
16442fd649
Add MESH SCSI driver.
...
Sort entries.
1999-02-22 20:25:43 +00:00
650f05d8c7
Ensure msgbuf_paddr is accessible (by bat).
1999-02-19 14:11:35 +00:00
c8117990ae
Use 6x11 font if screen size is smaller than 1024x768.
...
(Open Firmware ROM has 6x11 font.)
1999-02-19 14:02:33 +00:00
da71ba4292
First step of MESH SCSI support.
...
XXX no disconnect/reselect.
XXX sync transfer is very unstable.
1999-02-19 13:06:03 +00:00
60307f0ef1
Sync with mac68k.
1999-02-17 14:56:56 +00:00
4806be8d02
Use powerpc/reloc.h.
1999-02-16 17:53:42 +00:00
adf03cea81
Add copyright notice.
1999-02-16 15:20:51 +00:00
100778d54a
RCS ID police
1999-02-15 04:25:28 +00:00
dcab0210a0
convert from NOxxx= to MKxxx=no.
...
include <bsd.own.mk> if testing a MKxxx variable.
1999-02-13 02:54:17 +00:00
2a304686e6
Minor cleanup.
...
Make the initializer for BAUDLO depend on PCLK directly; it was incorrect on
some ports where PCLK is not 4.9152MHz.
XXX Is the default value actually used?
1999-02-11 15:28:03 +00:00
cd010c972c
Oops, last change is wrong...
1999-02-08 14:32:00 +00:00
d1276ebc65
Make this compile. (and sync with dev/ic completely)
1999-02-06 20:04:31 +00:00
7177191d30
Allocate DMA-aware memory area using "dma-alloc" method and use them
...
for data buffer.
XXX currently only netif_put() uses this.
iMac can use ofwboot.elf now.
1999-02-04 15:41:15 +00:00
78094a09f1
Uncomment PCI-PCI bridges.
1999-02-04 15:04:58 +00:00
630abfea00
Add PCI-PCI bridge support for Bandit.
1999-02-04 14:54:00 +00:00
610a648c7d
Use "local-mac-address" property to get MAC address.
1999-02-04 12:14:24 +00:00
be1af660c0
Don't set DCD_IE in the frontends. KGDB doesn't even use DCD, and the tty
...
frontends get it from zsparam() anyway.
1999-02-03 20:25:05 +00:00
54f0a0ae81
Clone changes from the version in dev/ic. (These should be merged!)
...
Note: NOT tested on this port yet.
1999-02-03 20:19:08 +00:00
68c9ce2c96
Don't use BAT register. (not needed now.)
1999-02-02 16:48:17 +00:00
a4de4218fd
Use private (its own) segment registers in Open Firmware call,
...
instead of BAT register.
1999-02-02 16:47:08 +00:00
ef69721044
findroot() now recognizes network devices.
1999-02-02 16:37:51 +00:00
378f49eff8
Ensure lowest 256MB is mapped by BAT0.
1999-02-02 16:29:25 +00:00
fed24e89c8
Adapt disklabel_mbr.h change.
1999-01-31 19:56:56 +00:00
a4f0ae9043
Adapt disklabel_mbr.h change.
1999-01-31 13:54:24 +00:00
24d9973308
Use <sys/disklabel_mbr.h>.
1999-01-27 21:30:08 +00:00
941abb6bf6
ofmsr[IP] = 0.
1999-01-27 14:46:28 +00:00
5ad236211f
Add file-system MFS.
1999-01-27 12:43:17 +00:00
711ac04b78
syncicache(sigcode, sigcodesize) before exec.
1999-01-24 15:07:51 +00:00
mycroft