b9f67baecf
<sys/sysctl.h> doesn't need to be after <uvm/uvm_extern.h> anymore, put
...
it with the other <sys/_foo_.h> include files.
2001-11-22 03:08:01 +00:00
0fa231134c
- replace "defopt" with "defparam" for options which must take a value,
...
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
03aef4723c
cleanup:
...
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""
2001-11-20 12:56:17 +00:00
af66038f73
Merge the thorpej-mips-cache branch onto the trunk. This is an
...
overhaul of how caches are handled for NetBSD's MIPS ports.
2001-11-14 18:15:10 +00:00
b1ec255377
Add a "firstbus" argument to pci_configure_bus(), indicating the
...
first bus number to use, rather than always assuming that we should
start at bus #0 .
2001-11-09 19:29:12 +00:00
6fd8d278ed
pci_conf_interrupt() takes bus/dev/pin, not bus/dev/func.
2001-10-29 23:33:42 +00:00
90a2bc2cf7
For MIPS kernel Makefiles, don't set ENDIAN in std.${MACHINE}. Instead,
...
explicitly set MACHINE_ARCH to the appropriate thing. Makefile.mips will
then set all of the internal variables it needs to accordingly.
2001-10-23 20:40:00 +00:00
e1f5fbd944
Fix a tyop in a comment.
2001-10-20 13:47:09 +00:00
d9e75e198e
Fix typo in mmap hander.
2001-10-20 05:56:35 +00:00
cfd067b21b
One copy of <sys/conf.h> will be enough.
2001-10-03 13:14:02 +00:00
0e7661f023
Update pmap_update to now take the updated pmap as an argument.
...
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.
Currently this is a no-op on most platforms, so they should see no difference.
Reviewed by Jason.
2001-09-10 21:19:08 +00:00
a41b7a380e
Clean up and standardise across MIPS ports.
2001-09-09 04:20:25 +00:00
81bcece4d4
Implement bus_space_mmap().
2001-09-04 16:32:42 +00:00
c91e08563f
Clean up.
2001-09-04 06:26:18 +00:00
62fb390c64
May as well include <mips/cpuregs.h> in <mips/cpu.h> once rather than
...
in every MIPS port's <machine/cpu.h>.
2001-09-04 06:23:15 +00:00
214f5366ea
Centralise struct cpu_info declaration and related info to <mips/cpu.h>.
2001-09-04 06:19:21 +00:00
a6b8c86af0
Remove an unneeded comment; ``sync'' with other "just include <mips/foo.h>"
...
files.
2001-08-31 03:53:22 +00:00
4ac4da1c52
G/C the unused kernel-only CLK_TCK #define.
...
XXX: does include/time.h still need <machine/limits.h>?
2001-08-31 03:46:03 +00:00
bcdac55add
Fix the display of the CPU clock speed.
2001-08-24 02:11:01 +00:00
8375df5b6a
Whitespace nits.
2001-08-24 02:07:34 +00:00
15dcb4a98e
Link the kernel at 1MB.
2001-08-22 19:44:47 +00:00
9f019df56f
Allow a keypress on the console to transition from "halted" to "returning
...
to monitor".
2001-08-22 19:13:09 +00:00
f0ea5cb1e9
Don't need to do the Alpha boot block checksum here :-)
2001-08-22 17:53:44 +00:00
17c22a634f
Set PCI_NETBSD_ENABLE_IDE to 0x01, so that the first IDE channel
...
will be enabled.
2001-08-22 00:42:43 +00:00
f5e6f05c1a
If PCI_NETBSD_ENABLE_IDE is set, enable the PIIX{3,4} southbridge
...
IDE channels on the P-5064 and P-6032, since PMON doesn't do it
for us (thus causing the `pciide' driver to ignore them).
2001-08-22 00:40:38 +00:00
ef8d715888
bzero -> memset
2001-07-22 15:11:01 +00:00
babefc5331
Add BUS_DMA_READ and BUS_DMA_WRITE flags, that hint the back-end
...
at dmamap load time that the mapping will be used for a unidirectional
transfer of the specified direction.
2001-07-19 15:32:10 +00:00
df016928f8
Remove (commented out) ncr* at pci? lines.
2001-07-07 17:09:47 +00:00
7a1408c38b
Deal with different `memsize' convention on new PMON revs.
2001-06-25 21:25:07 +00:00
498641fc7e
Print more BONITO rev. info.
2001-06-25 20:15:57 +00:00
2a171eff3a
Correct a typo.
2001-06-22 14:29:12 +00:00
3ae8717568
Add commented-out examples for how to use MEMSIZE and ETHADDR options
...
in the event that you need them (really old PMON versions). Add FDESC.
Comment out SCSI-related stuff until I work out why the system goes into
outer orbit when its enabled.
2001-06-22 14:15:56 +00:00
04986e1e9a
Add FDESC.
2001-06-22 14:14:16 +00:00
306b1b09bc
Kernel config file for a P-6032.
2001-06-22 14:12:19 +00:00
36a4b627d0
Sigh, Jason needs to go to sleep.
2001-06-22 07:00:25 +00:00
32e780695d
Add a couple of missing p6032 bits.
2001-06-22 06:50:21 +00:00
0c37c9e860
Check in work-in-progress of P-6032 support. This is not tested,
...
but is meant for back-up purposes.
2001-06-22 06:02:54 +00:00
7f047ac2b2
Use the other DMA window (with prefetch enabled) on the P-4032
...
on-board Ethernet. Suggested by Nigel Stephens <nigel@algor.co.uk>.
2001-06-22 05:57:26 +00:00
b440db94e8
Fill in one P-6032 snippet.
2001-06-22 04:33:26 +00:00
e4ce5f4268
A P-6032 will never have a V3 PBC -- don't include its option header.
2001-06-22 03:45:24 +00:00
b5443137f0
Only call through the function pointer if it's not NULL.
2001-06-22 01:42:20 +00:00
1ce7119f17
More ISA interrupt rototilling. I get *some* interrupts on a:
...
we1 at isa0 port 0x300-0x31f iomem 0xcc000-0xcffff irq 10
we1: WD8013WC Ethernet (16-bit)
we1: Ethernet address 00:00:c0:94:f6:72
...but still nothing on the PCIC.
2001-06-21 19:00:18 +00:00
e0901dc354
Fix whitespace botch.
2001-06-21 18:58:18 +00:00
cc6c89106a
Correct the ISA bridge irqmap.
2001-06-21 06:24:23 +00:00
f341043437
Rototill ISA interrupt code. In particular, I have remembered most
...
of the horror that is the 8259 PIC.
PCMCIA interrupts still not working yet, but getting closer.
2001-06-21 05:20:54 +00:00
e51a043945
Yet more interrupt cleanup -- the platform mater interrupt establish
...
function now just takes an "irq", which is an index into the irqmap
table for that platform.
2001-06-15 04:01:39 +00:00
1d161cd563
Correct a comment.
2001-06-14 19:03:43 +00:00
fe87c9aade
When the old PCI address map is in use, disable I/O space. Also disable
...
I/O space on PBC revs < B2.
2001-06-14 18:52:26 +00:00
0ddf0d259b
Don't use BUS_END to compute SYS_END.
2001-06-14 18:48:23 +00:00
80dfaa3e5a
Read the PCI memory space base and the PCI DMA window base from the
...
V3 PBC, and use them in the bus mem tag and the bus dma tag on the
P-4032. This allows us to get much further when PMON has configured
the PBC using the old-style PCI address map.
2001-06-14 17:57:26 +00:00
simonb