Makoto Fujiwara <makoto@ki.nu> and Manuel Bouyer <bouyer@netbsd.org>.
Help from Allen Briggs, Jason Thorpe, and Matt Thomas.
We need to call cpu_cache_probe() early in boot (machdep.c).
Add 603 info for completeness, and use NBPG not PAGESIZE, as the
latter relies on uvm being setup (cpu_subr.c).
Let uvm_page_recolor() be called before uvm has been set up; just
note the page coloring value (uvm_page.c).
while here, correct labelsector/offset mismatch in writedisklabel,
when readdisklabel() have found the label at nonstandard location
(due to magic number search). a lot of other ports have the same problem.
disk label offset. use hardcoded "1" for now, i guess we need a new #define
in sys/disklabel_mbr.h. fixes ofwboot to boot kernel off from MBR-formatted
disk.
- setup a 32KB (+32byte) stack, instead of 4KB stack
- cache flush: use _start instead of 0x4000, and flush 2k instead of 1k
Features (by me):
- implement:
OF_write() (and grab "stdout" from "/chosen")
putstrn(s,n) using OF_write(); write string s of n bytes long
putstr(s); write fixed-sized string s
putc(c); write char c
- add some useful messages which output the status of loading the
stage 2 bootstrap (which is usually ofwboot)
This code now works on Bill's Beige G3!
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.
an Apple Partition entry. As proposed to port-macppc. Also some
prototype modernization for touched routines.
Method is that NETBSD, NETBSD/MACPPC, NETBSD/MAC68K partitions,
if they have a valid bzb, contain all of the info we shove in a NetBSD
disklabel partition entry. defines in disklabel.h cover aliasing
some of the bzb fields.
indicating an unhandled "command". ERESTART is -1, which can lead to
confusion. ERESTART has been moved to -3 and EPASSTHROUGH has been
placed at -4. No ioctl code should now return -1 anywhere. The
ioctl() system call is now properly restartable.
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
the others. It is perfectly reasonable to have multiple adb keyboards,
and a number of multi-button mice have a fake kbd for the second and
third mouse buttons. Now my machine doesn't panic during boot when it
is trying to add a second ws console kbd.
completion routine so that the completion routine can reentrantly
process the queue. This happens, for example. when polling is turned
on by entering the debugger by keystroke.
and ofwboot.xcf will load at 640000. The idea is that we can now
leave load-base at 600000, and it will work right for all three methods.
The problem is that the file loader and the net loader use load-base
as a scratch area, so if the executable really wants to load there,
the load fails.
While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.
Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.
flag and a callback function which gets called whenever a target is
selected on a channel.
The macppc wdc driver needs to reprogram its timing register
differently for each target on a channel each time that target is
selected. I also changed the ATA4_TIME_TO_TICK to use a divisor of
15, which brings our timing calculations consistent with darwin.
These patches fix problems on my dual usb ibook with combo dvd/cdrw
drive because the hard drive supports udma and the combo drive does
not. Without turning off the udma timings in the configuration
register, I cannot access the non-udma combo drive.
for DEC-based chips, and to have tlp available for tulip clones. The change
in GENERIC is such that TLP_MATCH options are commented out (allowing de to
attach to DEC-based chips), and change in is INSTALL such that de is present
and TLP_MATCH options are commented out.
The addition of de in INSTALL increases its compressed size by about 17 KB.
Primarily the goal is to have INSTALL and GENERIC use the same device.
This will fix PR port-macppc/10779.
It has been tested with the 1.5.3_ALPHA GENERIC and INSTALL kernels on my
PowerMacintosh 7300 with a 21140A (now de, previously tlp) and a
Lite-On 82C115 (tlp).
de0 at pci0 dev 15 function 0
de0: interrupting at irq 25
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:a4:03:35
de0: enabling 10baseT port
tlp0 at pci0 dev 14 function 0: Lite-On 82C115 Ethernet, pass 2.5
tlp0: interrupting at irq 24
tlp0: Ethernet address 00:00:94:b6:16:ef
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
an interrupt anyway, just in case. Otherwise, report the timout condition.
This works around a problem in my ibook if a key is pressed after boot
and before adb is configured, such as when booting with -d.
this fixes calling OF_finddevice() with invalid devices,
and as a result fixes booting with -d.
Apparently openfirmware expects persistence of sprg2 and/or sprg3
I suspect this is used when handling exceptions
then try the old name usb-kbd-ihandle. This way my old iMac gets the
USB keyboard as console instead on the (non-existent) ADB keyboard.
Suggested by Gabriel Rosenkoetter.
isn't an OFW device, look it up in /aliases and substitute the bootpath
found into the string. This allow device_register to do it's thing.
Key off the drive number, not the channel, in autoconf.c. Closes PR#13756.
use the file system time. (My iMac seems to give 1904 as the year very
often (dead battery?), and setting the correct date with ntpdate doesn't
seem to work.)
and it introduced problems (EBUSY error when opening the driver for
writing in securelevel >= 1, plus manipulating some unitialized data at
the end of chrtoblktbl[])
Make sure that each va_start has one and only one matching va_end,
especially in error cases.
If the va_list is used multiple times, do multiple va_starts/va_ends.
If a function gets va_list as argument, don't let it use va_end (since
it's the callers responsibility).
Improved by comments from enami and christos -- thanks!
Heimdal/krb4/KAME changes already fed back, rest to follow.
Inspired by, but not not based on, OpenBSD.
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.
Currently this is a no-op on most platforms, so they should see no difference.
Reviewed by Jason.
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.
options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory
If anyone thinks that this is incorrect for any of these files, please
correct it.
Note - the i386 port was not forgotten. It was done separately.
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
to its currently enabled warnings. For the lack of a better place, most
global function prototype wound up in <machine/autoconf.h> unless there
was a better place for them. ofb_* structs renamed to offb_* to avoid
conflict with ofb_softc in <dev/ofw/openfirm.h>
