Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...
If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.
Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.
If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
firmware to delay completion of commands so that it can attempt to batch
a bunch of completions at once- either returning 16 bit handles in mailbox
registers, or in a resposne queue entry that has a whole wad of 16 bit handles.
Distinguish between 2300 and 2312 chipsets- if only because the revisions
on the chips have different meanings.
Add more instrumentation plus ISP_GET_STATS and ISP_CLR_STATS ioctls.
Run up the maximum number of response queue entities we'll look at
per interrupt.
If we haven't set HBA role yet, always return success from isp_fc_runstate.
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.
The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it).
One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.
Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.
For NetBSD, it does a ddi_dmamap_sync as appropriate. This gets us out of
the explicit ddi_dmamap_sync on the whole response queue that we did for SBus
cards at each interrupt.
Set things up so that platforms that cannot have an SBus don't get a lot of
the SBus code checks (dead coded out).
Additional changes:
Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.
Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).
Explicitly decode GetAllNext SNS Response back *as* a GetAllNext response.
Otherwise, we won't unswizzle it correctly.
Nuke some additional __P macros.
in how interrupts are down- the 23XX has not only a different place to check
for an interrupt, but unlike all other QLogic cards, you have to read the
status as a 32 bit word- not 16 bit words. Rather than have device specific
functions as called from the core module (in isp_intr), it makes more sense
to have the platform/bus modules do the gruntwork of splitting out the
isr, semaphore register and the first outgoing mailbox register (if needed)
*prior* to calling isp_intr (if calling isp_intr is necessary at all).
for the ICB firmware options meant- *I* had taken it to
mean that if you set it, Node Name would be ignored and
derived from Port Name. Actually, it meant the opposite.
As a consequence- change ICBOPT_USE_PORTNAME to the
define ICBOPT_BOTH_WWNS- makes more sense.
interace cleanups, some new common functions. The major impact that
will be noticeable right away is that if you boot with not Fibre connected
to the FC cards, you no longer hang indefinitely.
Correctly account for F-port vs. F-port (no FLOGI_ACC) topologies.
Make sure we get a port database entry for the fabric name server.
Preserve fabric logins if the device didn't change across fabric
or port database changes, or the device has already logged into
us (e.g., for target/initiator dual role devices like Veritas
SANbox). Propagate class 3 service parameter changes where devices
can change roles.
Fix all occurrences of setting a sendmarker so that setting it
for one bus on dual bus cards doesn't wipe a pending sendmarker
for other busses on the same card :-;.
Comments added and clarifications made in some of the target mode code.
that will SBusify an isp header or the lun/target portions of a request IOCB-
and have these only valid iff __sparc__ (no non-sparc SBus machine that *I*
know about).
the startup code. Implement a call to outer framework function so that
asynchronous events can be handled (e.g., speed negotiation, target mode).
Roll internal release tags.
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
There is one change of note- build a list of completing commands in
ispintr and then say you're done- this avoids some re-entrancy issues
that had surfaced.
