It seems that the firmware accept 104bit key only if
all the keys have 104bit length. We get the length of
the transmit key and use it for all other keys.
Perhaps we should use software WEP for such situation.
- Add "outputs.surround", "outputs.center", and "outputs.lfe"
- If the codec is not capable of a feature, mixer variables
about the feature is not created. For example, no
"outputs.tone" for a codec without tone control.
- Set the following mixer values in ac97_attach():
outputs.master=127,127
outputs.master.mute=off
outputs.headphones.mute=off
outputs.surround=127,127
outputs.surround.mute=off
outputs.center=127
outputs.center.mute=off
outputs.lfe=127
outputs.lfe.mute=off
inputs.dac.mute=off
inputs.cd.mute=off
inputs.line.mute=off
inputs.aux.mute=off
inputs.video.mute=off
record.volume.mute=off
because the default setting of AC'97 codec (all mutes are on,
and maximum volume) is troublesome.
- Make "char*" parameters of ac97_get_portnum_by_name() "const char*"
Codec ID changes:
- If a codec ID is unknown but its vendor ID is known,
ac97_attach() prints the vendor name like "dev0: <vendor name>
unknown (0xXXXXXXXX) codec;"
- Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545,
Realtek ALC100
- Correct a vendor name: "Advance Logic" -> "Avance Logic"
- Add capability of codec-specific initialization
ac97_attach():
- CDAC, SDAC, and LDAC are eanabled.
- DELAY() before mixer settings. ThinkPad X24 needs it.
ALC650 codec specific change:
- Add "outputs.surround.lineinjack" to switch the line-in jack
to the surround output
- Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias
of "outputs.center.micjack") to switch the mic jack to the
center/lfe output.
rename former uriopoll() to urioselect() and provide it only for OpenBSD -
FreeBSD uses nopoll() for urio too
g/c no longer needed uriopoll define for OpenBSD
XXX: Current code may have problems if kernel memory is completely depleted.
This is, unfortunately, not the only chunk of RAIDframe code to have
this problem, and will have to be dealt with. :(
* IPKDB_NE_PCISLOT does not need any dependencies (it is merely a
required parameter for IPKDB_NE_PCI).
* IPKDB_NE_PCI does should not have an option-dependency on IPKDB_NE_PCISLOT.
While IPKDB_NE_PCISLOT is a required parameter, that is not how option-
dependencies work, and we don't want IPKDB_NE_PCI to imply IPKDB_NE_PCISLOT,
as that would cause a bogus value for IPKDB_NE_PCISLOT to be used.
Also, the IPKDB_NE_PCI selector should be lower-case; make it so.
intterupts. No more races between the two interrupt handlers, without any
locking, and the driver becomes a bit simpler too.
Use the last bit of the config flags to select between the first and the
second sbus interrupt level the firmware has assigned to us.
"scsi_core". Make all the files previously selected by the "scsi"
attribute selected by the "scsi_core" attribute. Give the "scsibus"
device the "scsi_core" attribute.
initialisation. This is just as silly as the other entropy
estimations, but it at least allows us to see how many values have
been added.
spl protect rnd_get_entropy_counter call properly
Make rndpool start out doing rotations on the first pass - make the
LSFR's be less sensitive to stuck bits in poor initial inputs.
Add considerable comments regarding the mixing function.
- Remove VRA/VRM enabling in auvia_attach()
- Use ac97_codec_if::set_rate()
- Return no AUDIO_PROPS_MMAP for fixed-rate codec
- Remove unused variables in auvia_softc
Remove sc_fixed_rate and sc_ac97rate. ac97_softc has such
information.
auich_attach():
Remove VRA/VRM enabling code. ac97_attach() does it.
auich_set_rate():
Use ac97_codec_if::set_rate().
auich_get_props():
Return no AUDIO_PROP_MMAP if the codec is fixed-rate.
auichreg.h:
Remove unnecessary ICH_PM_*.
sources.
Multifunction devices, such as keyboards with built-in mice or
scrollwheels on different interfaces and/or repid's are each handled
as a separate entropy source.
ac97_attach(): Enable VRA/VRM if the codec is capable of them.
The struct ac97_softc keeps the clock of the codec, the basic
features flag (the value of AC97_REG_RESET), and the extended
features flag (the value of AC97_REG_EXT_AUDIO_ID).
ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock()
methods.
