Commit Graph

110 Commits

Author SHA1 Message Date
jonathan d01b866f0c Build kernel object files with -mno-abicalls and -mno-half-pic. (The
kernel doesn't support GP-relative addressing, and is statically linked).

Compile genassym without those flags: -mno-abicalls will make it coredump.
1997-03-05 04:41:57 +00:00
jonathan b57cf6e1ce Remove obsolete comment. (This config *does* work). 1997-02-28 09:51:21 +00:00
perry 19d153fc48 Nuke some options GENERIC residue. 1997-02-04 04:57:10 +00:00
perry 0b3a46d6b3 Nuke some GENERIC residue. 1997-02-04 04:31:55 +00:00
thorpej 4d7a6cf6dd Update clean and depend rule for kernel make changes. 1997-02-03 07:23:32 +00:00
thorpej 1b341f7e70 Update for new file system and root spec grammar. 1997-01-31 01:59:09 +00:00
perry b89a3425b7 Eliminate obsolete TIMEZONE and DST options.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.
1997-01-15 01:28:28 +00:00
cgd 38cbb3213c Fix up includes so that up-to-date versions of 'config' can be used
to config pmax kernels.  Not all kernels can actually be config'd because
of device declaration problems, but i don't know how to fix those.
1996-12-03 01:18:17 +00:00
jonathan e038926656 Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
1996-12-01 03:23:04 +00:00
jonathan 80702e3c14 Add KERNLD hook to allow overriding the LD used to link kernels.
Set KERNLD to ld.old.  gcc binutils 2.7 gets an assert error linking kernels.
1996-11-22 18:53:31 +00:00
jonathan 21ec686bd1 Move non-optional "options" SWAPPAGER, VNODEPAGER, DEVPAGER to std.pmax 1996-11-16 23:10:47 +00:00
jonathan 5c6013d588 Clone a 5000/{120,125,133} config file from the 5000/240 config. 1996-10-16 08:35:49 +00:00
jonathan 3280c75a3d Update model-specific pmax kernel config files for post-12 config:
add arch/pmax/conf/ to includes,  options MIPS1,   etc.
1996-10-16 08:29:34 +00:00
jonathan 0705c8f480 Kernel configuration file to build kernels for installing on diskful
machines, using diskless-boot (NFS root) as the installation method.

Many options turned off to keep kernel small and avoid boot-PROM errors.
1996-10-13 05:57:19 +00:00
jonathan 5a80d438e9 Update pmax config files ``GENERIC'' and ``DSG'' with post-1.2
NetBSD-current changes:
    * change include paths to be relative to the kernel-source tree
      (e.g., `/sys') instead of arch/pmax/conf.
    * add explicit options for exec packages (EXEC_ELF32, EXEC_ECOFF
      for COMPAT_ULTRIX)
   * comment out references to still-unsuppoted MI scsi.
1996-10-13 05:40:44 +00:00
jonathan bb34d39024 Change pmax port over to using ``mips MI'' trap handler. 1996-10-13 05:28:48 +00:00
jonathan 50201a6c48 Comment out config lines for MI scsi drivers, to make it absolutely clear
we don't yet support them.
1996-10-13 05:21:17 +00:00
mhitch f22ea83247 The dc has to have needs-flag so dc.h gets generated. 1996-10-11 19:58:43 +00:00
mhitch 2d3fc12c2b Fixed typo on EXEC_ELF32.
Newline at end of file was missing.
1996-10-11 19:55:38 +00:00
jonathan fa2f6c517a Update pmax GENERIC config to use revamped config files with per-model
include files containing model-specific I/O device configuration.

Add more options and devices (ccd, LKM, etc), as appropriate for
documentation and as examples in a "template" GENERIC config file,
even though not all of these work completely yet.
1996-10-02 06:41:13 +00:00
jonathan 15e3cf2814 Add explicit options for elf and script exec packges to std.pmax.
Add ECOFF exec option  to my own config file; untested.
1996-10-02 05:56:37 +00:00
jonathan 2c2c7c31cb Add files.pmax entries for separate cfattach front-end and ``MI'' backend
drivers:
	pm - pmin/pmax  d503 PCC + BrookTree 478 framebuffer
	dc - dc7085 DZ-11 clone
	asc - ioasic and TurboChannel SCSI option card 53c94 SCSI-2
	sii - DEC scsi ASIC used in pmin/pmax, 5100, and Firefox vaxes
1996-09-30 08:11:23 +00:00
jonathan 701c775b0b Update all the include directives to use pathnames relative to the root
of the kernel source tree, not the port config directory.
1996-09-30 02:38:17 +00:00
jonathan 0c1b5cd12b Build and link in locore_machdep.S. 1996-09-30 02:35:34 +00:00
jonathan 75fd343a78 Build locore using merged mips (mips1, mips3) locore source:
* Add MIPS make variable pointing at $S/arch/mips
  * Build locore from $MIPS/mips locore source
  * Build locore.o and fp.o (fp emulation) from arch/mips locore source
  * Add target and rules to build pmax-specific locore code locore_machdep.o
    from $PMAX/pmax/lcore_machdep.S
1996-09-25 20:41:00 +00:00
jonathan 2ec085cba7 Back out part of revision 1.30:
>* Use `-S' rather than `-x' to remove debugging symbols.

because the pmax toolchain and gcc disagree about what is a "local"
symbol, and ld requires a "-x" to let elf2aout build bootable a.out kernels.
1996-09-25 20:35:16 +00:00
jonathan 4a465f05ff Decstation kernel config file for diskless installation:
root and swap on NFS, but includes disk and tape drivers.

Prune out most `optional' options to stay small in the hope of avoiding
PROM tftp bugs.
1996-09-18 14:10:24 +00:00
jonathan 420c045b41 Create broken-out config files for decstation baseboard devices.
Add sample config files that use them.
1996-09-18 13:43:37 +00:00
mycroft b3ffba62a6 Move strip(1) flags into a separate variable, so that $STRIP can
be passed to subordinate make(1)s.  Remove $TOUCH.  Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
1996-09-09 21:06:55 +00:00
mycroft 30a617c634 Wrap the default definition of `S' in `.ifndef'. 1996-08-31 21:40:47 +00:00
jonathan 703e546127 Add mrg's "options COMPAT_12" back into the trunk. 1996-08-28 05:50:59 +00:00
jonathan 18db5ea067 * Rename miniroot GENERIC kernel to GENERIC
* Add changes needed/used to build 1.2 GENERIC kernel:
  * Delete obsolete and ambiguous DS5000 option.
  * Add CPU_R3000 which is now required to compile in mips1 locore support.
  * Add an explicit declaration of HZ.
  * back out COMPAT_12 for this revision.
1996-08-28 05:49:35 +00:00
mrg b8e9f36083 add COMPAT_12. 1996-08-26 23:39:36 +00:00
mycroft 558d72128e Put into . Remove hooks for `config-dependent' and
`device-driver' flags.
1996-08-12 00:51:24 +00:00
mycroft cf67f29afe * Add a HOSTED_C_C variable, which strips `-p', `-pg', and
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
mycroft f94052ed3a * Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
mhitch 9d8526a68d Use the MI LANCE drivers - the pmax-specific one no longer compiles. 1996-05-29 06:05:05 +00:00
mhitch a2d094fb48 Fixes to make kernel compile: HZ is required to be defined and CPU_R3000
is needed to include R3000 support.  Also change the le0 to le* for the
3100 LANCE so it configures properly.
1996-05-29 06:01:13 +00:00
mhitch 9aa945f3c4 Also use genassym.c from sys/arch/mips/mips for make depend. 1996-05-19 22:44:12 +00:00
jonathan b6a3c3255f Use genassym.c from sys/arch/mips/mips. 1996-05-19 17:17:48 +00:00
mycroft 540f9550c0 Make `make depend' work for libraries. 1996-05-11 16:11:30 +00:00
thorpej b97689cdfb Make the MI LANCE driver standalone, and use cfattach to resolve
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 01:16:36 +00:00
jonathan 449a7f5b59 Remove files moved to mips/mips; they are included in mips/conf/files.mips.
Add the pmax-specific portion of trap handler, pmax/pmax_trap.c, which
was split off from pmax/trap.c.
1996-03-26 12:21:39 +00:00
jonathan 5d4883f9ed Add "mips" to the machine line, to make config create a link
compile/XXXX/mips ->  mips/include, and to use mips/conf/files.mips.
1996-03-20 01:17:06 +00:00
cgd 94907fa254 adjust to deal with expression support for optional file specs 1996-03-17 13:21:09 +00:00
cgd 1f7332bada fix typo in recent attachment changes: (interface) attributes for asc
specified twice.
1996-03-17 06:09:10 +00:00
thorpej 77abd102b7 New device attachment scheme:
- split softc size and match/attach out from cfdriver into
	  a new struct cfattach.

	- new "attach" directive for files.*.  May specify the name of
	  the cfattach structure, so that devices may be easily attached
	  to parents with different autoconfiguration semantics.
1996-03-17 01:38:52 +00:00
cgd 3d67685d36 Do not build vnode_if.[ch] for each kernel. Build them once, like the
various syscall sources/headers, and just compile them.  From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
mycroft 2ce52ae489 Define build programs with `?=', so they can be overridden with `makeoptions'. 1996-02-26 02:53:20 +00:00
jonathan d25690e30a Propagate changes from cfb driver to not require "needs-count" to other
pmax framebuffer drivers.
1996-02-15 19:13:08 +00:00