63698a2c60
Revert to decemal numbering. From talking w/ Jason, we really should
...
support more than 256 ports. That would mean 3 digits in hex, and I
don't want to write the script for that..
2000-06-09 17:58:29 +00:00
00ee1c57fc
Cyclades-Z tty's are now ttyCZ??, not ttyCZ????. Add support for them
...
to macppc's MAKEDEV.
2000-06-09 16:59:03 +00:00
5b8623bec6
Add and rc.conf.d directory. If a config file for command X exists
...
(/etc/rc.conf.d/X), then it is sourced in addition of /etc/rc.conf
This means that the base system will still use rc.conf, but that
3rd party scripts can use rc.conf.d
2000-06-09 14:27:57 +00:00
75748efda9
Use load_rc_config
2000-06-09 14:14:44 +00:00
2f3b6e9a65
Fix blocksize to match ns/nt/nc.
2000-06-09 12:58:57 +00:00
0ced5dd715
Enable -6 flag to nfsd.
2000-06-09 00:08:02 +00:00
8e734e6188
Make the release notes, etc.
2000-06-07 20:29:00 +00:00
b88d86b1b6
Comment out telnet, ftp since they use cleartext passwords (discussed
...
recently on tech-net, no objection raised except that it doesn't go
far enough..)
Fix misc/10219 as suggested in PR: add -L to rlogind and -l to tftpd
command lines to enable logging.
2000-06-06 12:04:02 +00:00
95c4357e1b
Add kpop.
2000-06-05 18:12:57 +00:00
0377727ee6
Fix typo in last commit.
2000-06-04 09:34:58 +00:00
306acd3e78
Handle "bktr" related devices like audio devices:
...
- Create device nodes with numbered names (e.g. "tuner0").
- Create softlinks with unnumbered names (e.g. "tuner") pointing to device
nodes of unit 0.
2000-06-04 09:34:06 +00:00
2ece7fc42f
use netstat -inv for all address familires. PR 10249.
2000-06-04 08:35:10 +00:00
609377a40f
run sendmail under the following conditions:
...
- /etc/mail/sendmail.cf exists, no /etc/sendmail.cf
- /etc/mail/sendmail.cf exists, /etc/sendmail.cf same content as
/etc/mail/sendmail.cf
die in other cases. PR 10243.
2000-06-04 08:33:58 +00:00
e3fc70bd16
Add a ttyaction file for port-i386 that properly sets the ownership
...
on the console device when you log in using wscons on the console.
Why haven't we had defaults for this all this time?
2000-06-04 00:04:59 +00:00
4d477e62b7
install ttyaction if it exists
2000-06-03 23:53:17 +00:00
5b78d0c312
Rename a remaing comment about portmap to rpcbind.
2000-06-03 17:23:59 +00:00
a5f38c029b
rpcbind uses a pidfile.
2000-06-03 00:17:17 +00:00
580b06b52e
s/portmap/rpcbind/
2000-06-02 23:23:27 +00:00
02cd59a751
* Portmap is now called rpcbind.
...
* Add IPv6 RPC entries to inetd.conf (commented out by default, as the others)
* Add netconfig file, needed for TI-RPC code.
2000-06-02 22:54:08 +00:00
ce0c35cb45
Make the two installation directories mentioned in INSTALL.*
2000-05-31 21:09:48 +00:00
934311a24b
Update instfs to current ramdisk size.
2000-05-31 17:39:55 +00:00
a7c4c34f96
refer PR 10100 for /etc/sendmail.cf check
2000-05-31 16:00:36 +00:00
1a725dd534
Build and install the release notes.
2000-05-31 15:45:55 +00:00
d32a31d48c
Build boot media and release notes under "snap_md_post", to complete
...
the "make release". Largely copied from the i386 port, and adapted.
2000-05-31 14:33:11 +00:00
f5e3c48aad
Depends on quota; when quotached runs while NFS clients are writing,
...
bad things happens.
2000-05-29 07:10:41 +00:00
e63bc36c7f
Call "load_rc_config()" earlier so that configuration variables are read
...
before command arguments are defined. Fixes PR bin/10220 by Ron Roskens.
2000-05-29 06:53:03 +00:00
bb3e285167
Add Cyclades-Z nodes.
2000-05-28 23:12:15 +00:00
adbdfe4a4e
Fix this so that release notes are build properly upon `make release'.
2000-05-28 17:31:27 +00:00
cdc1e0be32
/etc/dhclient.conf is *not* required for dhclient to run.
2000-05-26 20:44:17 +00:00
e4983783f7
Enhance "rc.lkm" so that it works properly with "/etc/rc.d/lkm[123]".
2000-05-26 17:46:16 +00:00
fb3a33ff99
We may as well allow local additions to /etc/security, since it gets done
...
for the other periodic checks.
2000-05-26 17:08:21 +00:00
75db01943c
Add `ses' devices.
2000-05-22 17:01:30 +00:00
60270df72a
remove /etc/sendmail and other old items.
...
PR 10171 from Andrew Brown.
2000-05-22 04:14:30 +00:00
76b8870254
Add declarations to silence boot-time warnings from named
2000-05-19 13:07:37 +00:00
66b5e3cb8a
make miniroot play with distrib/miniroot
2000-05-18 02:03:36 +00:00
61632e05bb
Software bloat. we need more space for the ramdisk.
2000-05-17 21:44:15 +00:00
18cbc264e3
build INSTALL for ramdisk. cleanup pcs750.bin rules to not leave droppings
...
behind.
2000-05-17 21:40:45 +00:00
41b9e77eff
MAKEDEV goo for Cyclades-Z multi-port serial.
2000-05-17 18:14:10 +00:00
4c318b5d41
At boot, initiate parity/mirror reconstruction as required.
...
This operation is backgrounded, and sequentially ordered.
2000-05-16 16:54:33 +00:00
d683136c9f
Don't complain about existence of "/etc/sendmail.cf" if "sendmail" is
...
not set to "YES" in "/etc/rc.conf".
2000-05-15 06:16:04 +00:00
598c993af2
Add RCSid.
2000-05-14 23:13:54 +00:00
e3d7832343
Minor change:
...
Don't use a backquote expression to get the host name; use a pattern
substitution on lop-nor.ihack.net instead.
2000-05-14 18:20:55 +00:00
24ad7fd36c
Add "wscons" to requirement list so that a tty used for syslog output
...
will be created before starting the syslog daemon.
2000-05-14 13:12:11 +00:00
5c1b0ec207
Use load_rc_config() (from rc.subr) instead of sourcing /etc/rc.conf.
...
This allows us or a user to change the configuration file method in
one place - rc.subr - without having to edit all of the rc.d/* files.
2000-05-13 08:45:06 +00:00
2c25ae21eb
Implement load_rc_config(), which takes the config name as an argument.
...
Currently this just loads /etc/rc.conf, but this will make it easier
for us and users to modify the config mechanism without modifying all
of /etc/rc.d/*.
2000-05-13 08:23:45 +00:00
78abee064b
remove netstart
2000-05-13 08:07:01 +00:00
92612bb41e
this should have been removed as part of the rc.d commit
2000-05-13 08:02:35 +00:00
ff0601b77a
remove commented-out entry for mountd, since whilst support for inetd
...
was added to mountd in mountd.c::1.6, it was removed as part of the
4.4-lite merge in mountd.c::1.12. if the entry was uncommented your
machine might clag up after a showmount as inetd spawned lots of
mountd processes...
2000-05-13 07:28:09 +00:00
d934c3b536
only support reload as an extra command; there's too much special case
...
code that needs to be implemented to make this script totally replicate
what /usr/sbin/ndc does.
2000-05-13 03:46:42 +00:00
eabbaa2f0c
implement three new variables for run_rc_command:
...
- ${name}_chdir directory to cd to before running ${command}
- ${name}_nice nice level to run ${command} at
- ${name}_user user to run ${command} as
based on [misc/9954] by Dave Sainty <dave@dtsp.co.nz>, except that it works :)
2000-05-13 03:07:17 +00:00
wrstuden