cb8d483e24
add function prototypes.
2004-02-15 12:50:38 +00:00
0c12e11dfc
use different values for each run to fill the mmaped region.
2004-02-15 12:49:27 +00:00
88bdc13921
a simple test of uvm page loanout.
2004-02-15 12:20:26 +00:00
87494016cc
avoid conflict on re-defining ioctl.
2004-02-14 18:30:23 +00:00
cf164a174c
Add test cases for the algorithm fixes by Joseph Myers, from test cases
...
from David A Bagley.
2004-02-08 13:43:48 +00:00
fa553aa877
Move clockctl.h to end of list
2004-01-21 03:28:00 +00:00
9c301eca05
Removed by request of Theo Deraadt <deraadt@cvs.openbsd.org>, pending
...
further resolution or re-implementation.
2004-01-21 03:01:16 +00:00
70c91c4341
Add NetBSD RSSid.
2004-01-21 02:14:14 +00:00
d222896fe4
Opencrypto "cryptotest" tool, from FreeBSD 4.8, courtesy of Sam
...
Leffler. Sam obtained the original code from OpenBSD, attributed
largely to Theo Deraadt.
2004-01-21 02:06:25 +00:00
4126327e1a
Only include one of <sys/cdefs_elf.h> or <sys/cdefs_aout.h> depending on
...
__ELF__. Only include <stdbool.h> if __GNUC__ > 2.
2004-01-20 23:45:09 +00:00
8625845ca6
Nuke all userland uses of __HAVE_RAS in favor of runtime detection.
2004-01-18 16:47:06 +00:00
15459da491
revert revision 1.2, which was accidentally committed
2004-01-17 05:48:37 +00:00
378c93dfc4
add regression test to check combination of bs and conv options
...
this checks for a bug fixed in revision 1.24 of src/bin/dd/args.c
2004-01-17 05:47:28 +00:00
9bff0c1a82
Remove previous makefile hack (disabling optimization) and add
...
__insn_barrier()s instead.
2004-01-07 19:42:22 +00:00
266b7c2701
Avoid optimizations that move common code out of the RAS.
...
The compiler does not understand RAS, so it makes wrong assumptions
about the lifetime of register values.
2004-01-06 21:40:57 +00:00
c926d8d22d
support MKCRYPTO=no (des.h is not present)
2004-01-04 00:25:52 +00:00
7138133de7
support MKSKEY=no
2004-01-03 15:05:37 +00:00
0d9a131abe
On archictectures not supporting RAS make this regression tests
...
print a message to that effect and let them pass.
2004-01-02 22:16:43 +00:00
ab4f8b76c0
enable sigmask1 and siglongjmp1
2004-01-02 19:27:46 +00:00
f44e43cd85
Regression test for siglongjmp out of a signal handler back into
...
its thread.
2004-01-02 19:27:06 +00:00
ec7c3305d4
Regression test for pthread_sigmask when SA upcalls aren't started yet.
2004-01-02 19:26:24 +00:00
6d206bfa62
skip ai_canonname from testing, as it can be vary by /etc/hosts setting.
...
pointed out by Martin Husemann
2004-01-02 15:07:39 +00:00
572d0edcf8
Descend into siginfo on cleandir always.
...
From David P. Reese Jr. in PR toolchain/23936.
2003-12-31 11:14:25 +00:00
b0b7ac330d
Fix regression failure due to missing dependency.
...
From Jorge Acereda via PR bin/23664.
2003-12-23 19:29:11 +00:00
8bf78d509a
Update the checksum to match src/lib/libc/stdlib/random.c rev 1.23.
2003-12-19 18:39:04 +00:00
4b5c99bea9
Don't check for HAVE_SIGINFO if make(obj) (as more than likely the compiler
...
doesn't exist yet and the subdir is always descended on make obj)
2003-12-17 05:36:43 +00:00
d0d3605346
.include <bsd.own.mk> so the proper have of CC is defined before we use it.
2003-12-11 22:45:06 +00:00
7e4c34eca1
Add a check whether the stack is executable when needed, and one whether
...
the stack is non-executable if not explicitely enabled.
The latter one is not enabled in the Makefile yet because it cannot
succeed on platforms where the non-exec stack is not implemented.
Both checks rely on the fact that gcc puts trampoline onto the stack
for nested functions. On platforms where no such trampolines are used,
no meaningful results can be expected.
While not perfect, this is much easier than hand-coding trampolines for
each CPU type.
2003-12-10 13:24:59 +00:00
c81f32fe6c
comment from niels provos;
...
- seed2 is necessary, but use it as "seed2 + x" not "seed2 ^ x".
- skipping number is not needed, so disable it for 16bit generator (makes
the repetition period to 30000)
2003-12-10 05:22:18 +00:00
7bcd27fa9a
Add another regression test that does not work right now.
2003-12-02 18:30:35 +00:00
f1e9f5f0af
less magic constant.
2003-11-29 19:09:21 +00:00
a7fbae904d
Fix up abort test so that we abort the first time we see a small enough
...
period, not the second time.
Use UINT64_MAX (from Klaus Klein).
Remove trailing blank line.
XXX: 12000 still isn't right - values around 11800 have been observed.
2003-11-29 00:11:18 +00:00
db92efc5c8
Print out a little more info in the debug case.
2003-11-27 01:03:13 +00:00
d94d0c139d
uint64_t may not be "unsigned long long", so use of ULLONG_MAX is not
...
appropriate.
adjust max period (see randomid.3 1.2 -> 1.3)
2003-11-25 23:14:48 +00:00
374a535730
Add condcancel1.
2003-11-21 19:26:05 +00:00
d2ac4c0565
RCS ID
2003-11-21 19:25:50 +00:00
2d3513cfd8
Regression test for destroying a condition variable that had a cancelled
...
wait.
2003-11-21 19:24:01 +00:00
e77146bf27
Actually print self in the "Thread %p got semaphore" message.
...
While here make whitespace only lines empty.
2003-11-19 00:40:03 +00:00
1f9b81f68b
kjk reported this does not work on the vax.
...
- don't include <ieeefp.h> if vax
- never include <sys/float_ieee754.h>
2003-11-18 23:21:38 +00:00
4c758a9f41
Descend into bin/dd
2003-11-15 10:50:59 +00:00
9adae06087
Regression tests for dd(1). Not currently comprehensive, but tests for the bug reported in PR bin/8521.
2003-11-15 10:48:53 +00:00
bafaeff914
Descend into the randomid directory.
2003-11-14 23:11:20 +00:00
1fd22c15cc
Add a regression test for randomid(3).
2003-11-14 23:10:48 +00:00
6d0baf7772
Remove <frame.h>
2003-11-14 14:13:31 +00:00
967d9a12d5
Add NetBSD RCS id's.
2003-11-13 06:48:31 +00:00
ae4155f2d9
Annotate changes and remove non-existing files.
2003-11-07 23:10:00 +00:00
03d49d9b1b
Remove more troublesome files for now.
2003-11-07 21:10:33 +00:00
91cf4290f4
Comment out some files that makes this break on some platforms.
2003-11-07 20:57:26 +00:00
abd55fcd3e
no more disklabel_mbr.h
2003-11-07 17:41:52 +00:00
5054637087
don't include varargs.h for gcc-3
2003-11-07 17:40:38 +00:00
7264e1f642
add okheaders to the test
2003-11-07 15:48:09 +00:00
f85d2d1c14
Use ${HOST_SH} instead of `sh'.
...
If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.
2003-10-26 07:25:33 +00:00
857ab1bdd0
use ${HOST_SH} instead of /bin/sh
2003-10-26 03:50:07 +00:00
d0d137fcf0
Check HUGE_VALF and HUGE_VALL as well. Also add some cross checking for
...
floating type promotion and demotion of these.
2003-10-25 22:38:19 +00:00
d039cc06d0
Lift the vax restriction on the nan test.
...
None of the tests in this directory will even build on the vax, and it's
disabled in the parent Makefile for that reason.
2003-10-24 21:25:20 +00:00
d66a9fb0bc
Make this test the currently libc-internal isinfl() as well.
...
While I'm here, turn these into assert(3)-based tests.
2003-10-24 16:35:08 +00:00
d805d82f20
Make this test the currently libc-internal isnanl() as well.
...
While I'm here, turn these into assert(3)-based tests.
2003-10-24 15:54:46 +00:00
f9e944d1a0
While the intention of picking up the target's include files was fine,
...
those files are not available in certain phases in the build process,
notably the "obj" phase, so unconditionally decend into siginfo during
that pass. This should make read-only source trees build again when
cross-compiling for a target supporting siginfo on a host not supporting
siginfo.
2003-10-23 21:59:35 +00:00
aa20eb60ec
Fix a comment.
2003-10-22 23:57:04 +00:00
73704c4ce4
NULL/integer mixup
2003-10-21 09:42:07 +00:00
492f508473
Don't use NULL inappropriately.
2003-10-21 09:32:54 +00:00
0833278c93
Don't compare the return value of strncmp(3) against NULL - it's an integer.
2003-10-21 08:46:15 +00:00
4bdc6bf1cb
Make sure to pick up the target's include files in the test for whether
...
we have SA_SIGINFO defined.
2003-10-20 00:07:47 +00:00
cd1fabcef4
Writing to address 0x5a5a5a5a does not guarantee a SIGSEGV on all platforms
...
(e.g. on sparc, this produces a BUSERR). Just use a NUL pointer instead.
2003-10-12 17:13:46 +00:00
8655c7d7eb
Add a MAP_WIRED flag to mmap(2), which causes the new mapping to be
...
wired as if by mlock(2).
2003-10-07 00:17:09 +00:00
ce8fc220ee
don't descend to siginfo on platforms that don't have it. by popular demand.
2003-10-04 20:29:52 +00:00
b4a47d2e02
Query _POSIX_SEMAPHORES before the functional tests are run.
2003-10-01 12:18:53 +00:00
b6f1a886f4
Turn on strict warnings and add a main()
2003-09-30 21:05:04 +00:00
2be3afdc37
don't check for vaddr_t yet, because all ports define it.
2003-09-30 21:01:59 +00:00
2d148569b5
Make sure that our headers are clean enough by including all of them, and
...
checking for symbols that we leak in userland that we should not. Currently
only vaddr_t checked.
2003-09-30 20:47:23 +00:00
4aa6d02a2d
Maybe I'm just slow, but having diffs in the wrong direction confuses me...
2003-09-30 04:20:24 +00:00
af8bef6910
Catch up with MAXINTERP changing.
2003-09-30 03:41:33 +00:00
7f2125f83b
sysctl has moved.
2003-09-30 03:34:42 +00:00
afea89cace
Make this test actually *work*...
2003-09-30 03:29:08 +00:00
bc895a7e30
Descend to siginfo; this will prompt the port masters to complete the
...
necessary work.
2003-09-26 18:13:36 +00:00
80911070d5
Add a test for output when using context options and -z.
2003-09-14 15:10:49 +00:00
46b2019823
+grep
2003-09-14 13:51:16 +00:00
260648d185
Import of some regression tests for grep. Some of them based on tests
...
seen in OpenBSD src/regress/usr.bin/grep.
2003-09-14 13:47:47 +00:00
2874dc149c
this needs to be able to core-dump so unlimit core
2003-09-14 07:14:28 +00:00
3db3349e14
Add a Makefile for the siginfo tests
2003-09-14 07:06:40 +00:00
a17de3f746
Add a Makefile
2003-09-14 06:55:01 +00:00
88827cce1c
turn this into a proper regression test.
2003-09-14 06:54:28 +00:00
d6330eb736
more regression.
2003-09-14 05:38:41 +00:00
bb2796d215
make this a true regression test.
2003-09-13 22:55:17 +00:00
f34da8442c
Add a regression test for testing that here documents don't confuse the
...
exit status of the previous command ($?). Fixed long ago on -current,
but forgot to commit this test...
2003-09-13 09:35:56 +00:00
91e2bd73c5
add regression test for siginfo and threaded signal delivery.
2003-09-12 21:15:05 +00:00
ea9e274f07
delete bogus sigcontext
2003-09-12 16:18:37 +00:00
c86f27654b
new vm86_struct that does not use sigcontext.
2003-09-11 19:14:01 +00:00
a1b15f00d2
sigcontext->siginfo
2003-09-10 15:33:08 +00:00
6607193a4c
simple tests to verify new signal trampoline works.
2003-09-06 22:27:22 +00:00
7fd74af1e3
add a "using namespace std" to make it compile with gcc3, and remove
...
the Makefile clause which disabled it in the gcc3 case
2003-09-03 20:53:16 +00:00
1e69032f26
forgot these with:
...
introduce an additional switch to enable building GCC3 instead of GCC2:
HAVE_GCC3. if this is set, we also set USE_TOOLS_TOOLCHAIN=no. change
the definition of the former to be restricted to whether tools/toolchain
is used or not.
2003-09-02 06:36:22 +00:00
03bdc52085
#include <crypto/rijndael/rijndael-api-fst.h> to make this compile.
2003-08-28 22:31:46 +00:00
feb2a2aee7
Rewrite for new CAST-128 implementation.
2003-08-27 12:37:09 +00:00
4063218cee
add vm86
2003-08-16 15:43:00 +00:00
1aa623b237
some basic vm86 tests, with and without separate signal stack
2003-08-16 15:02:35 +00:00
640826818b
s/DL_LAZY/RTLD_LAZY/
2003-08-12 16:15:33 +00:00
0f5220a9e0
Descend into games.
2003-08-12 03:05:20 +00:00
103942fe21
Add a regression test for factor(6). Just has the Jenny prime for now.
2003-08-12 03:03:20 +00:00
21fd723e0c
choose ldt positions invidious enough to exercise the
...
kernel's ldt reallocate strategy,
now we can reproduce the problem described in
PR port-i386/19724 by Stephen Ma
2003-08-11 17:19:51 +00:00
yamt