Commit Graph

30 Commits

Author SHA1 Message Date
cgd add839488b instead of using msg_printf_add("\n") to add a newline to the output,
add a 'newline' message and use msg_display_add().
1999-07-04 21:52:11 +00:00
cgd c624190287 convert run_prog's error message from being a "const char *" to a msg.
XXX Only the callers that actually pass strings were fixed, the rest were
XXX left passing 'NULL'.  Eventually they should be cleaned up to pass
XXX MSG_NONE, but I didn't want to do that yet because somebody else
XXX (jonathan) is hacking on the run_prog callers and I didn't want to
XXX cause him a Lot of conflicts.  at least right now, MSG_NONE and NULL
XXX are as equivalent as they need to be.
1999-07-04 21:39:33 +00:00
cgd 5c3428778d convert tables to use the new table formatting functons. i386 tested,
mac68k and bebox bits compiled to the extent possible.  (bebox seems
broken, with duplicated menu names, but it doesn't look like that's my
fault.)
1999-07-04 08:01:39 +00:00
cgd a640bc7014 copyright notice typo fixups, as noticed in PR#7248. This software
was developed, not develooped.
1999-06-20 06:08:13 +00:00
bouyer 8d7cb08335 Main change: add a cleanup_dist() function in util.c which will do the needed
cleanups before extracting a set. Should'nt do anything for an install,
as the filesystem shouldn't contain files that need to be removed.
cleanup_dist() is called before extract_file() for each set (the set name
is passed as parameter). It will open a file /dist/<set name>_obsolete
if it exists. This file should contain a list of files (absolutes
pathnames) that needs to be removed. cleanup_dist() will lstat() each file
to determine if it's there and if it's a directory or not.
It will then unlink() entries that are not directories and then rmdir()
directories. If a directory is not empty (it should now if the list of files
is correct) it will be renamed to <directory.old> and the user will be warned.

Other changes:
- move prototype of target_prefix() in defs.h, don't maintain a copy
  of it in each file.
- in install.c, after MSG_disksetupdone, do a wclear(stdscr) (display was
  clobbered after it).
- kill MSG_openmsgbuf, it's not used anywhere
- after MSG_disksetupdone in upgrade, don't call MENU_ok, do it the
  same way as in install.
- add wclear(stdscr);/wrefresh(stdscr); before calling MENU_distset (another
  display problem ...)
- While I'm there, move ask_verbose_dist() before MENU_distmedium. This way,
  if all go well the user can go away one ftp starts and come back once
  sets are extracted.
1999-04-13 20:17:47 +00:00
bouyer be743ed36b - Add 2 functions in label.c, getpartoff()/getpartsize() used to let the user
enter partitions offet and size. The user can chose unit independantly of
  the unit used for display ('M'/'c'/'s'). These functions do the proper
  bound checks and alignement/roudups. Used in the edfspart menu and
  i386 md_make_bsd_partitions() (other ports should do the change as
  well).
- now that getpartsize() does the rigth thing, kill the swapadj hack (which was
  buggy anyway).
- in i386 md_make_bsd_partitions(), don't propose defaults that don't fit on
  the disk. If the disk is too small, fallback to custom instead.
- fix a bug in mbr.c, where the partition flags would not have always been
  reset. sysinst created me a MBR with 2 active partition. The boot code
  doesn't like it :)
- added a message for eventual mount failures.
- killed donewfs and extracting messages, as we run  the commands in a
  subwindow these messages just flashed on the screen.
- Changes a few exit(1) to return(1), to give the user a second chance.
- added msg_clear() or wclear(stdscr) in a place or two, to make
  display a bit nicer.
- in run_cmd(), if the command succeeded, don't wait for the user to
  press enter.
1999-04-11 22:40:19 +00:00
bouyer 04f9354ab3 Some fixes for the do_install() function:
- Make all the functions called from do_install() return an error code,
  so that we can abort install if something went wrong.
- Add a 'errstr' argument to run_prog(), which if not NULL is displayed
  with msg_printf() and followed by process_menu(MENU_ok) if the command fail.
  Used to warn the user that the current action is aborted.
- in a few places use msg_display() or msg_printf() rather than printf.
  It seems that stdout/stderr are not always pointing to the active curses
  window.
- garbage-collecd unused messages, add a few new one (error handling).
XXX only tested on i386. Other md parts should be tested as well.
1999-04-09 10:24:38 +00:00
fvdl a5d73e00eb Rework the MBR code, and some of the labelling code.
* Use structures, not 2-dimensional arrays..
	* Use the DIOCGDEFLABEL ioctl to get the disk information,
	  to avoid confusion with (older) labels.
	* Don't ever call fdisk for partitioning. This was the
	  source of much confusion.
	* For the i386, use the BIOS geometry information passed by
	  the bootblocks.

Lots of things left to do, but it's a start.
1999-03-31 00:44:48 +00:00
fvdl a4ca20e23e Start cleaning up geometry code by storing the disk geometry in a structure
with proper names, not an integer array with is numerically indexed.
1999-03-14 14:19:05 +00:00
garbled 37a95fd205 Oops.. missed an external declaration in the merge.. compiles now. ;) 1999-01-21 08:13:02 +00:00
garbled 865c31ac7b This change includes the following:
Scripting and logging functionality for sysinst.
Child programs are run in a "display window" so you can actually see what
	they did before the screen flashes back and you loose it all.
Lots of curses fixups.  Removed nasty endwins that mangled the tty upon
	rentry.
Change the yes/no box to accept Y or N, and not require cursor motion to
	decide one or the other.
Perform curses redraws when doing things that could cause the kernel to
	spew printfs onto your screen.
1999-01-21 08:02:17 +00:00
simonb b520d1bbc1 s/sprintf/snprintf/ 1998-12-16 22:35:26 +00:00
jonathan 56b85b59ae The disk-scanning loop in get_disks() had a magic upper bound of 5.
Replace with MAX_DISKS (size of the array of disk info).

Fixes a problem where sysinst cannot install onto disks rz5 or greater
on pmaxes (which use old SCSI with wired-down scsi devices, even for
GENERIC kernels).
1998-10-31 03:54:44 +00:00
phil be6397e767 Implement a config file (-f file) option that overrides compiled in
defaults for things like rel (release number), ftp host, ftp prefix,
cdrom device, cdrom directory and others.
1998-10-25 19:15:04 +00:00
jonathan d7afdff3d0 * Add main menu option to reinstall sets or install additional sets.
(like upgrade but without trying to save etc.

* Add option to setls0urce menu to look in an already-mounted (local)
  directory.  Change `local fs' option to say umounted local fs.

* Change extract_file() to check that a tarball actually exists
  and give an explicit non-curses warning if it doesn't. (see above.)

* GNU tar returns a successful status if its gunzip child dies.
  Add short sleep() after tar commands in case of undetected errors.

* Change set-source selection code (except FTP, floppy) to check
  that the mandatory set files (base.tgz, etc.tgz) exist
  in the selected directory.  If they don't, warn the user and
  prompt the user to  change the selected directory.
  Give the user the option to explicitly continue even if
  base.tgz or etc.tgz not found, just in case.

* Change extract_file() to keep count of set unpacks that succeeded
  or failed. (Unreliable, given the broken return status of gnu tar.)
  Warn the user if there are errors and abort the installation/upgrade
  if we find any.  Does at least catch Ctrl-C interrupts of unpacking.

* Make unwind_mounts() signal-safe.

* Sense of target_verify_* is broken. Replace with predicates that
  return 1 iff the file or directory exists.

* Fix upgrade tests for existing etc.old (see above) before saving
  target /etc as /etc.old.

* Other detail fixes.
1997-12-05 14:00:59 +00:00
jonathan 6266fb93be Quote disktab(5) entry name so that label names with spaces
(e.g., "bsd disk") work CVS:
1997-12-02 11:00:59 +00:00
jonathan 35fa360c0b * Create /mnt2 before unpacking sets, in case it's not on install media.
* Create target /kern after creating target /etc/fstab entry for /kern.
* Check for more  files in target when done: /etc/{rc,rc.subr,conf}
* Clean up warning exerciser.
1997-11-13 03:06:44 +00:00
jonathan 3b987e7971 * Add local definition of DISKLABEL_CMD to arch/i386/md.h.
* Remove default definition from disk.c.  Ports that don't support
  dislabels (e.g., amiga) can now just not define DISKLABEL_CMD.
1997-11-09 04:14:10 +00:00
mhitch f36de6c906 Use getrawpartition() rather than a constant when creating the new fstab. 1997-11-05 22:49:06 +00:00
jonathan 77221dcc6a * Add code to run `test(1)' on target-root pathnames.
* Change find_disks: after mouting target root, check for
  /etc/fstab in target, and abort upgrade if not found.

* Change upgrade to check if the target root has /etc.old
  before renaming the target /etc -> /etc.old.  If found, abort.
  (may indicates a failed upgrade.)

*  Add save_etc(). saves target /etc as /etc.old, then copies back
   config files we might want during upgrade, in case target is current root.

* Fix logic that fscks and mounts disks. Use subroutines to
  fsck with a warning message and ok() on continue.  Same for doing mounts.

* Fix bug in extract_dist(). Do NOT do target prefixing on the dist_dir,
  since we didn't do target prefixing when mounting it.
  (At least, NFS does't.)

* Add function to  sanity-check target root.
   Call after upgrade/install  is done.

* Change MSG_realdir to print the strerror() of any errors.
  Change target_chdir() to check if chdir() returns -1 and return errno.

* Make sure /dev exists before cd'ing there and running MAKEDEV.

* Use target_fopen() and fprintf() to write network state to disk,
  to avoid inadvertent shell escapes.

* Fix silly typo in append_to_target_file. (maybe add shell quotes?)
1997-11-05 07:28:20 +00:00
jonathan 3e74d705e2 * Clean up target.c to use a single consistent path-prefixing subroutine.
* Correct arg typo in mv_within_target_or_die().
* Add new path-prefixing entrypoints to fopen(), collect(), and do mounts.
* Use the above.  MI code is now clean of explicit references to /mnt.
* Lint: add `const' to collect()'s pathname arg.
  include <stdio.h> in factor.c, now that defs.h uses FILE*.
1997-11-03 02:38:41 +00:00
jonathan 2d4f71002f * Use getmaxpartitions() instead of explicit constant 8.
* Put newfs-and-mount code into a separate function, in case
  we want to support non-ffs filesystems.
* Check for the currently-mounted root, and don't newfs or mount it.
  Assumes md code will also avoid changing  that partition.
1997-11-03 00:04:53 +00:00
jonathan 2d01e4dc90 * Change sysinst MI code to use new install-target-filesystem access functions.
Add  target.c to Makefiles.

* Minor fixes:
  * Fix buglet in disks.c: make sure the target /etc exists before
    touching the target's /etc/fstab. (Could be even cleaner.)

   * If the target root is on /, don't copy our temporary /etc/resolv.conf
     to the target /etc/resolv.conf. (Could be even cleaner.)
   * Don't write the DNS hostname into /etc/defaultdomain.
     DNS  search paths are often not the same as YP group names.
1997-11-02 08:20:40 +00:00
phil 2cb88494a3 Tweeks to editing file system partitions, fix for PR4405, adding a method
to reselect the allocation multiplier while editing a disklabel.
1997-10-31 23:00:32 +00:00
phil d626993ee4 Sync with current state. Includes selection of distribution sets, tweeks
to disk detection, and floppy load.
1997-10-29 01:06:42 +00:00
phil 345ae6924d Recover more bits lost in my earlier blunder. Get update working.
Other minor tweeks.
1997-10-22 15:28:33 +00:00
phil 15274f8880 Update to current state. Install and upgrade nearly finished. Disk
discovery and geometry no longer use /kern/msgbuf.
1997-10-15 04:35:17 +00:00
phil 9f2b3143db Update to current state. 1997-10-07 04:01:29 +00:00
phil 7f55972efc Sync with current state. Fixes PR 4193. factor.c -- replce prime table with
code to generate needed primes.  Change copyright because prime table was only
code under previous copyright.
1997-10-01 05:04:24 +00:00
phil af1d23bed3 Import of sysinst. Not quite ready, but other ports want access for
parallel development.  i386 version about 90% complete.  pc532 version
just started, other architectures later in coordination with portmasters.

This is a curses based, menu driven installation program.

Better error checking is needed.
1997-09-26 23:02:53 +00:00