hannken
815491c0b3
Remove the old device buffer queue interface.
...
Approved by: Jason R. Thorpe <thorpej@wasabisystems.com>
2002-08-30 15:43:36 +00:00
scw
60bff6ed9c
Make sure to sign-extend PTEH/PTEL values before writing to the TLBs.
...
Make sure to zero-extend PTEH/PTEL values before comparing with TLB entries.
Don't use the two LSBs of CTC when choosing a "random" TLB entry to replace;
seems like these bits are always zero on this CPU.
2002-08-30 13:54:16 +00:00
scw
7da5ef1b84
Delete the CPU_CTB1 option; it was never used.
...
Add the SH5_INTC_IRL_MODE_INDEP option, to correctly configure
the interrupt controller for Cayman.
2002-08-30 11:25:09 +00:00
scw
877f6b7143
Add some options:
...
- SH5_SIM, as we're targetting the simulator.
- KERNEL_IPT_SIZE, as we want to reduce startup time.
- DDB. Yes, DDB inside a debugger/simulator. :)
2002-08-30 11:23:12 +00:00
scw
aaa2f7e5ca
When running on the simulator, assume there is 16MB of "RAM". This
...
greatly reduces startup time.
2002-08-30 11:06:03 +00:00
scw
1fd693d5b5
In the IRL1 interrupt handler, you need to read the Interrupt
...
Source Register#0, Steve. Not the Board Operating Mode register. Duh.
2002-08-30 11:03:25 +00:00
scw
de63e7f1e4
Swap the IRL numbers for FEMI and SUPERIO, after reading the Cayman
...
docs a bit more closely...
2002-08-30 10:59:39 +00:00
scw
5cc4fe3194
Slight tweak to how the sm(4) driver attaches to superio. Also, just
...
use the regular bus tag for sm(4) instead of superio's "special" ISA
bus tag.
2002-08-30 10:57:05 +00:00
scw
ec32f137a2
Add byte_swap.h
2002-08-30 10:50:55 +00:00
scw
5bb390ef0d
Re-arrange the endian/byteswap headers a bit by splitting off the
...
byte swap code into a separate file and renaming them.
Fix a typo which prevented ntohX and htonX macros DTRT for
little-endian mode.
2002-08-30 10:50:06 +00:00
scw
7958409b89
If running on the simulator, use a much lower buzz-loop count when
...
waiting for ACKs from the DTF host, otherwise the simulator waits
way too long for the initial open-ACK (which never seems to arrive,
even though things work fine afterwards).
2002-08-30 10:45:31 +00:00
scw
986af15320
Setup the IRL[0-3] mode according to what the kernel config file specifies.
2002-08-30 10:41:24 +00:00
scw
14b4efaf64
If running on the simulator, skip the pbridge probe.
2002-08-30 10:39:26 +00:00
scw
f8f7664ef6
Defflag/param some options for:
...
- selecting Simulator/ST50 Debugger targets,
- hard-coding the cpu speed instead of using the speed detection code,
- changing the default kernel IPT size,
- selecting the IRL[0-3] mode to configure in the interrupt controller.
2002-08-30 10:29:35 +00:00
ross
839099aa7b
regen
2002-08-30 00:34:09 +00:00
ross
b2703dc568
fix typo
2002-08-30 00:33:15 +00:00
bouyer
3d187bd055
The 1010 will generate a scsi gross error if a RAM entry is read before being
...
written (i.e. is used uninitialised). The esiop SCRIPT may do this in some
circonstances (and it is safe) so bus_space_set_region_4() the RAM in
reset routine.
Problem reported and fix tested by Allen Briggs.
2002-08-29 18:23:52 +00:00
scw
873939f14a
Fix a typo which resulted in a bus_space_write_stream_4() where it
...
should have been bus_space_write_stream_2().
The sm(4) driver gets a bit further now.
While I'm here, g/c a debug printf accidentally commited last time around.
2002-08-29 18:11:07 +00:00
briggs
37019d791a
Use generic_bs_sr_4 for bus_space_set_region_4.
2002-08-29 17:29:34 +00:00
briggs
043080912d
Add generic_bs_sr_4
2002-08-29 17:27:48 +00:00
augustss
186b9996e7
Regen.
2002-08-29 16:46:36 +00:00
augustss
d498b930ff
Add two devices.
2002-08-29 16:46:15 +00:00
bouyer
f86eed6ce2
Add definitions for the AIP control registers (1010 only).
2002-08-29 16:43:23 +00:00
scw
1256340461
Add the frame pointer (r14) to the list of registers to save in
...
the pcb during a context switch.
2002-08-29 16:04:10 +00:00
bouyer
b13c46b64c
Fix typo in comment.
2002-08-29 15:42:49 +00:00
martin
95617c00d7
Experimentation shows the hme chip is SIMPLEX if used in full-duplex
...
mode, but not otherwise.
This fixes PR 17523.
2002-08-29 14:33:03 +00:00
hannken
ffd7a8c585
Convert to new device buffer queue interface.
...
Tested with help from Hauke Fath <hauke@Espresso.Rhein-Neckar.DE>
on Performa 600 and Quadra 700.
2002-08-29 14:15:37 +00:00
martin
5eee9e2b47
Adapt to recent exec changes.
2002-08-29 14:02:50 +00:00
christos
9cf6437e8f
Fix internal copyargs too.
2002-08-29 14:01:08 +00:00
christos
ff79c1e140
adjust copyargs signature to pass struct proc.
2002-08-29 13:59:23 +00:00
christos
f2d5bd5133
s/au_/a_/g noticed by martin
2002-08-29 13:48:42 +00:00
hannken
6243846e46
Get rid of error -66 (sector not found).
...
From Hauke Fath <hauke@Espresso.Rhein-Neckar.DE>
2002-08-29 09:26:23 +00:00
leo
eeb4fd145c
defopt SERCONSOLE
2002-08-29 08:28:58 +00:00
simonb
284c3f4875
It's the gt64120, not the gt62140.
2002-08-29 08:02:35 +00:00
chs
2f11784ca7
only create a vmcmd for the BSS if there is any BSS. fixes PR 17834.
2002-08-29 06:31:21 +00:00
chs
d510857ed4
be sure that the page we allocate to break a loan is put on a paging queue.
...
fixes PR 18037.
2002-08-29 05:03:30 +00:00
chs
d6988a7eb6
Add `audio* at uaudio?' so that uaudio is actually useful. PR 15610.
2002-08-29 04:54:47 +00:00
chs
d8a392f619
wrap Debugger() in #ifdef DDB. fixes PR 15881.
2002-08-29 04:43:43 +00:00
thorpej
d9374670ba
Put PERFCTRS under "Development and Debugging options".
2002-08-29 02:25:22 +00:00
thorpej
12f448527a
Don't need SOSEND_LOAN here anymore.
2002-08-29 02:22:46 +00:00
scw
9af86f9bf3
Oops, got the source operands for an "andc" reversed.
...
This gets the hardware interrupt event handler working.
2002-08-28 21:05:25 +00:00
matt
e25f13dfbe
From OpenBSD:
...
- Fix one typo (instead of two disable_rx, one disable_rx and one disable_tx)
[The other bug fix isn't appropriate since the was OACTIVE is dealt with
has been changed in NetBSD.]
2002-08-28 17:46:58 +00:00
itohy
fa5465079f
Slightly improved version of ffs(3).
...
Partially from SHIMIZU Ryo <ryo@iij.ad.jp>. Thanks.
Some cases are slower, but other most cases are faster.
Here's a benchmark on SH-4 200MHz.
return value C version previous vers this version speed ratio
of ffs() (ns/call) *1 (ns/call) (ns/call) *2 (*1/*2)
------------ ------------ ------------- ------------ -----------
0 86 86 81 1.06
1 110 86 106 *(slower) 1.04
2 132 86 106 * 1.25
3 165 105 117 * 1.41
4 201 104 116 * 1.73
5 237 111 107 2.21
6 271 111 106 2.56
7 307 126 116 2.65
8 342 125 116 2.95
9 376 122 126 * 2.98
10 410 121 127 * 3.23
11 446 139 136 3.28
12 483 140 134 3.60
13 518 146 125 4.14
14 551 146 126 4.37
15 587 161 135 4.35
16 624 162 136 4.59
17 658 141 139 4.73
18 694 142 140 4.96
19 727 160 148 4.91
20 764 161 150 5.09
21 799 167 141 5.67
22 834 167 142 5.87
23 868 181 152 5.71
24 903 181 153 5.90
25 939 146 140 6.71
26 974 146 141 6.91
27 1009 166 152 6.64
28 1044 165 148 7.05
29 1080 171 141 7.66
30 1115 171 141 7.91
31 1151 185 151 7.62
32 1185 186 151 7.85
2002-08-28 15:34:35 +00:00
dsainty
278bea1a2b
Fix playback at 48kHz sample rate (integer overflow bug introduced in 1.18)
2002-08-28 10:51:03 +00:00
gmcgarry
14b302311d
RAS support for i386.
2002-08-28 09:47:15 +00:00
onoe
fd9daca7ea
Attach another DLTs for bpf: DLT_IEEE802_11 to capture raw 802.11 frame.
2002-08-28 09:38:08 +00:00
onoe
5d6bb1fbc3
Define new kernel interface bpfattach2() to register another data link
...
type for the driver, which will be used for 802.11 drivers.
Also add 2 APIs to get a list of available DLTs and use one for them.
BIOCGDLTLIST (struct bpf_dltlist)
BIOCSDLT (u_int)
2002-08-28 09:34:57 +00:00
onoe
b4c41e0480
Define new DLT: DLT_IEEE802_11, DLT_PRISM_HEADER, and DLT_AIRONET_HEADER
...
from tcpdump.org
2002-08-28 09:31:20 +00:00
gmcgarry
d6109af7cb
RAS support for m68k.
2002-08-28 08:56:59 +00:00
gmcgarry
1a8058823b
RAS support for MIPS. Tested on R3000.
2002-08-28 08:34:06 +00:00