lukem
ee04d88971
Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
...
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.
XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.
2004-05-16 09:53:09 +00:00
lukem
5be4460d43
Support CONFIGLINKS, which is similar to LINKS, except that they're installed
...
with the 'configinstall' target instead of the 'install' target.
2004-05-16 09:44:38 +00:00
kochi
660dc92018
Fix typo in variable name.
2004-05-16 07:14:17 +00:00
thorpej
56906b900a
Patch from HITOSHI Osada:
...
* Add PAUSE-related event counters.
* Return flow control bits in fxp_mii_mediastatus().
2004-05-16 02:59:04 +00:00
thorpej
7e156484d4
Patch from HITOSHI Osada:
...
* Newer chips do not need the receiver lock-up workaround; detect when it
is required.
2004-05-16 02:41:46 +00:00
thorpej
47e9c860d9
Add flow control support, based on work by HITOSHI Osada.
2004-05-16 02:34:47 +00:00
thorpej
f3eaee75cf
Add PAUSE-related event counters for sip(4) and gsip(4), slightly modified
...
from a patch supplied by HITOSHI Osada.
2004-05-15 22:33:13 +00:00
thorpej
ffa382bf7c
Patch from HITOSHI Osada:
...
* On the DP83820, don't set PCR_PS_DA if the PAUSE packet address is
not registered in the multicast filter.
2004-05-15 22:26:49 +00:00
thorpej
9ac446650a
Patch from HITOSHI Osada:
...
* SiS900 chips require the address of the PAUSE packet to be registered
in the multicast filter.
2004-05-15 22:24:51 +00:00
thorpej
b7d5c113dd
Add PAUSE-related event counters. Slightly modified from patch supplied by
...
HITOSHI Osada.
2004-05-15 22:19:27 +00:00
thorpej
34b8c2c481
Patches from HITOSHI Osada:
...
* Set buffer management high water marks for MTU > 1514.
* Set BGE_MAX_RX_FRAME_LOWAT (from Linux driver).
2004-05-15 21:58:40 +00:00
dsl
568270beb4
Parse a disk name of "raid:no_mbr" to mean "raid" but without any mbr
...
setup (on i386). Allows sysinst to install to an existing RAID1 volume.
2004-05-15 21:53:29 +00:00
dsl
9e2ccccce9
Don't leak an fd if malloc() fails in collect()
2004-05-15 21:51:30 +00:00
dsl
d3ff291eea
Reduce the number of times <enter> must be typed during network setup.
2004-05-15 21:48:09 +00:00
dsl
9debb4b795
Add i386 to the list of systems that support booting from raid1.
...
RAID(4) also needs changing - if someone knows where the source is....
2004-05-15 21:46:54 +00:00
itojun
02324171a6
sync to /etc/services change (http -> www)
2004-05-15 19:19:52 +00:00
bouyer
bf4920bc20
In wdcprobe1(), protect the register writability test with splbio().
...
What we do here seems to trigger interrupts on some pcmcia adapters, which
cause the kernel to hang.
Add some WDCDEBUG_PRINT((), DEBUG_PROBE).
Avoid touching registers of nonexistent drives, once we know which drive is
or is not here.
This makes the "IBM PCMCIA Portable CD-ROM Drive" (external CD drive with
PCMCIA adapter) work.
2004-05-15 17:15:09 +00:00
wiz
99ca1f2942
groff-1.19.1 out.
2004-05-15 16:01:11 +00:00
itojun
ba67da06a5
bump buffer size for any_ntoa(), for huge sa_len
2004-05-15 14:13:36 +00:00
itojun
7340ad20ce
2-byte read overrun for unknown sockaddr. from openbsd
...
XXX out[64], is it safe? what if sa_len > 23?
2004-05-15 13:41:09 +00:00
wiz
fd08660c9a
\*[Gt] instead of >; sort SEE ALSO.
2004-05-14 22:07:21 +00:00
christos
2f5db2d55d
s/notreached/noreturn/
2004-05-14 22:04:01 +00:00
christos
b4b51ab090
Document and implement -f for elf objects.
2004-05-14 21:56:45 +00:00
christos
ce9f2915a6
PR/25566: Anders Magnusson: ftp(1) do not like large TCP windows.
...
Limit it to 8M.
2004-05-14 18:39:21 +00:00
he
b6e471013e
Expand the ramdisk image size from 3m to 3148k so that the contents
...
fits again.
2004-05-14 17:00:21 +00:00
christos
6d5a568271
don't accept a negative number of swap devices; it will attempt to malloc
...
something very large and might crash the kernel; From Evgeny Demidov
2004-05-14 16:56:09 +00:00
christos
d3f7c2a23c
Check for bad offsets at the beginning of the functions to save processing.
...
Idea from OpenBSD.
2004-05-14 16:36:33 +00:00
christos
999e9cef64
Simplify the code by:
...
1. Checking for a negative uio_offset at the beginning. This really does
not affect us in most cases because we check that later too.
2. Checking for attempts to write to init sooner and in all cases.
2004-05-14 16:35:24 +00:00
cl
c489489b14
- increase number of receive buffers
...
- handle case where last receive buffer is used
2004-05-14 14:23:35 +00:00
cl
4dd8e2b2cf
use relative links: using $S fails if $S is relative to another dir
...
than the one where it's used
2004-05-14 14:07:46 +00:00
pk
454a5a1188
Fix locking issues noticed by Tom Ivar Helbekkmo on tech-net:
...
* always acquire the device instance lock at splnet()
* missing unlocks in various places
Also, since this driver allows its device instances manipulated by two
independent subsystems (character device & interface clone create/destroy),
be careful not to rip away instance data in a clone destroy request if the
instance is still opened as a character device.
2004-05-14 13:23:12 +00:00
skrll
8431fb3c4c
Wrap a couple of lines to <80 columns
2004-05-14 11:59:14 +00:00
skrll
c788a1a535
Whitespace.
2004-05-14 11:11:02 +00:00
yamt
deea834892
pass5: dereference of an uninitialized pointer.
2004-05-14 10:41:12 +00:00
he
2f568eeda1
The evbsh5 port also installs Xvfb and it's man pages, so list those here.
2004-05-14 10:03:12 +00:00
he
bf3ab88a22
Use lower optimization level (-O0) for miscfs/genfs/genfs_vnops.c
...
in order to avoid an internal compiler error with gcc 3.3.3 nb2.
2004-05-14 08:58:32 +00:00
darcy
e063143584
Spelling fix. Deomcratic ==> Democratic.
2004-05-14 07:53:22 +00:00
he
dedc7522a7
Drop optmization to -O0 for sh5 for one file to work around an
...
internal compiler error.
2004-05-14 07:21:24 +00:00
he
7cf5573a11
Drop optmization to -O0 for sh5 for one file to work around an
...
internal compiler error.
2004-05-13 22:32:47 +00:00
christos
d04e4d7440
- add debug flag.
...
- nicer way to wait for everyone to finish.
- check that we got consistent results.
This now works with my bind-9 based libc!
2004-05-13 21:32:36 +00:00
mhitch
64c96922cf
Now that the missing libm functions are available on the vax, build
...
glxgears and glxinfo. This will fix the checkflist failure on the vax
build.
2004-05-13 21:10:36 +00:00
mhitch
a6d522d13c
Add ceilf(), floorf(), and sqrtf() (as wrappers using ceil(), floor(), and
...
sqrt() repectively). The fixes PR#22796.
2004-05-13 20:35:40 +00:00
yamt
66b2ec5ff7
fix a compile error in the case DDB && !GPROF.
...
the problem pointed by Jaka Jejcic on current-users@ and
by several others privately.
2004-05-13 20:30:39 +00:00
kleink
faed9caa49
There's no point in bringing PRNG output to network byteorder prior to
...
transmission.
2004-05-13 20:27:38 +00:00
he
d05f876265
Avoid lint failure in setjmp.h; lint doesn't handle __attribute__
...
modified declarations.
2004-05-13 19:54:25 +00:00
christos
eba562cd86
PR/20066: John F. Woods: Supply a loadable lcpstatus command.
2004-05-13 19:37:58 +00:00
christos
3d17911bf4
Add RCSID.
2004-05-13 19:27:47 +00:00
christos
902cdcd697
don't use values from the stack.
2004-05-13 19:25:48 +00:00
christos
8a5f1452b7
slap in tnf copyright.
2004-05-13 19:20:28 +00:00
christos
7f519e1822
Add test of parallel name resolution [it does not work yet]
2004-05-13 19:17:12 +00:00