128258c1a2
Initial IOBlix support. Only lpt and com; lpt untested; com assumes 24 MHz
...
clock (needs autoprobe of clock speed).
2000-03-23 22:44:42 +00:00
b667a5a357
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 06:30:07 +00:00
e86957458a
Install "machineendian_machdep.h".
2000-03-17 22:36:31 +00:00
9e21b6555a
In the `MY THAT'S GROSS' department...
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:09:18 +00:00
8bc084e1de
Kill more broken cf_unit bogons.
2000-03-16 16:37:20 +00:00
1634305526
Kill a couple of unnecessary cf_unit (ab)uses.
2000-03-15 20:40:00 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
7cd55062c0
do as if bus_space_read_4() returned an int, although it just calls panic.
2000-03-04 11:49:18 +00:00
4eb55e447c
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 06:32:20 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
8f03b9a04a
Define the DONETISR macro and use netisr_dispatch.h. This is to cut down on code duplication and to standardize the available NETISRs across all ports.
2000-02-21 20:38:46 +00:00
77292e79c6
fix a couple of things to handle interrupts more cleanly on the A1200
2000-02-21 18:27:49 +00:00
728c720d75
acknowledge the interrupt to gayle before entering wdc_intr.
...
This fixes the lost interrupts problem.
fix some glitches on the A1200 too.
2000-02-19 17:16:20 +00:00
a90153e264
enlarge the initial kernel page table - needed for some 128 MB machine
2000-02-14 20:23:20 +00:00
5903e181fa
Nuke NKMEMCLUSTERS.
2000-02-12 03:29:18 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
9bf09631c6
Only output message on really special DEBUG kernels.
2000-02-11 19:09:56 +00:00
dc0ce1249b
fix interrupt handling
...
I still get lost interrupts on the A1200, but the problem is certainly
elsewhere (not in wdc_amiga).
2000-02-10 15:51:59 +00:00
a10113c83a
fix a couple of things to (hopefully) make this work on the A1200
2000-02-09 22:27:20 +00:00
7f5a7c00ac
fix include file.
...
<netinet6/ip6.h> -> <netinet/ip6.h>
2000-02-09 05:48:26 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
93be165768
Remove an "#if 0" I seemed to have missed, to include wd* devices in the
...
search for root filesystems.
2000-02-06 21:45:03 +00:00
d9b42dd1fc
At long last, the MI wdc glue for the Amiga. Tested on my A4000, but not
...
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
2000-02-05 18:46:28 +00:00
db4859bcd8
Regen (with commented MI wdc stuff)
2000-02-05 18:42:49 +00:00
915731c9ea
Add commented out configuration for MI wdc.
...
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.
2000-02-05 18:41:58 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
11c8f56d48
Revert STRIPPROG -> STRIP
2000-02-01 05:25:24 +00:00
a50bf9a39a
Include word access methods with stride 4.
...
Add a byte-swapping access_method array for use with MI wdc driver.
XXX Currently only read_multi_2 and write_multi_2 are used by MI wdc code;
XXX The other byte-swapping routines still need to be added.
2000-02-01 05:21:24 +00:00
1d24598795
Add check for wdc [MI wdc support].
...
Move 'cd' device back to end of the genericconf table - we want to check
the 'wd' device before the 'cd' device.
2000-01-31 22:51:53 +00:00
f12b50fc81
Add the wd devices for MI wdc IDE drive support.
2000-01-31 22:49:12 +00:00
97107f760d
Add the config information for the MI wdc support.
2000-01-31 22:47:07 +00:00
554647f636
Semicolons in the 32-bit macros aren't nice.
...
Add a stride-4 with swapping bus_space_method for use by MI wdc.
2000-01-31 22:43:36 +00:00
b0fbaa33fb
Remove obsoleted macros.
2000-01-26 09:44:10 +00:00
3d9809edd8
oops. Comment out #include "wd.h" as I didn't commit generic wdc code yet.
2000-01-25 17:02:43 +00:00
04eb110431
Add "dependall" target for comfort.
2000-01-24 20:36:06 +00:00
7e5ff67457
Add commented out "ident"-command
2000-01-23 23:46:04 +00:00
9fe838f17f
regen.
2000-01-23 21:31:30 +00:00
a7a7a71ee4
add (commented out) PCMCIA devices entries
2000-01-23 21:29:55 +00:00
4288d7a5cf
add stride 1 functions support and PCMCIA support
2000-01-23 21:10:26 +00:00
c37bcf990c
add PCMCIA initialization
2000-01-23 21:08:16 +00:00
d7e70f7068
sync with new bus.h
2000-01-23 21:06:12 +00:00
9e5a868b12
add IPL_SERIAL to enable PCMCIA com* compilation
2000-01-23 21:04:22 +00:00
3a54b5a896
code factorisation and added stride 1 functions
2000-01-23 21:02:17 +00:00
9b5252590b
add PCMCIA generic support
2000-01-23 20:57:27 +00:00
2c44cb587d
add files which deal with the gayle chip
2000-01-23 20:53:18 +00:00
e084c6cfec
Tell changers to commit AMIGA and DRACO, too.
2000-01-22 21:16:56 +00:00
236fe18599
synchronize this with GENERIC.
2000-01-22 21:09:38 +00:00
52242fdf9f
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:28:59 +00:00
aa195e816f
Fix PR9240: comment above cpu_fork() out of synch with reality on most ports.
...
(comment change only, but was wrong for more than just i386).
2000-01-20 22:18:54 +00:00
is