itojun
d9bcf0f87a
use "!rtsol" for IPv6 interface autoconf.
...
XXX i did not use "!rtsol $int" because there could be problem with
shell script expansion ($int gets expanded too early).
2001-05-07 11:49:52 +00:00
fvdl
58dc4d0703
Use the -2 option for the NFS mount. Install kernels might have
...
NFS_V2_ONLY to save space, and we're only reading anyway.
2001-04-29 00:22:34 +00:00
kleink
8a9b17ef14
Sync with gethostbyaddr() declaration change in <netdb.h> rev. 1.21;
...
from <lha@stacken.kth.se> in PR misc/12775.
2001-04-28 14:56:42 +00:00
simonb
6f6fe2f3ad
Spell occurred correctly.
2001-04-25 02:33:08 +00:00
itojun
4a360e2310
write out IPv6 configuration to /etc/rc.conf and /etc/ifconfig.*
2001-04-15 11:08:51 +00:00
briggs
ae21cdde67
Make this compile again:
...
* Remove duplicate definition of "nobiosgeom"
* Update to "new" edit_mbr() and define a basic md_bios_info().
2001-04-12 03:48:12 +00:00
mellon
871abbab37
Make things a lot smaller.
2001-04-06 18:53:33 +00:00
simonb
20f99292d1
Disable tracing in the distrib client (controlled by #ifdef SMALL in
...
includes/site.h).
2001-04-06 06:39:54 +00:00
thorpej
c00d041746
Make this work with the new dhcp code -- but the binary is Bigger.
...
Might require some trimming in the dhcp code itself.
2001-04-06 04:09:55 +00:00
tsutsui
0409a49e97
"NOMAN= yes" -> "MKMAN= no"
2001-03-17 07:10:54 +00:00
dogcow
84e3a863c2
missed a \n after dhclient_flags=\"%s\".
2001-03-06 09:22:40 +00:00
abs
ef51389957
Update the pleasemountroot message to indicate which root needs to be
...
mounted, and what needs to be done.
2001-02-26 16:32:53 +00:00
cgd
668a4dd967
convert to use getprogname()
2001-02-19 22:39:39 +00:00
wdk
9123196f19
sysinst utility for mipsco port
2001-02-19 07:38:44 +00:00
tsutsui
899149f1e5
Add x_mount, which does not include any MOUNT_PROGS.
...
Installer does not require all vfs progs and all binaries
are crunched after all.
2001-02-18 06:15:48 +00:00
tsutsui
b5a9f7605f
Add x_umount to SUBDIR.
2001-01-31 20:48:11 +00:00
jmc
d264c53a1d
Add support for installing serial bootblocks. If biosboot_com0.sym exists
...
on the ramdisk image then ask which set of bootblocks to install (normal or
serial). If it doesn't exist, just install the normal ones. (small/tiny
images).
2001-01-27 07:34:39 +00:00
jmc
b70406007d
Fix various typo's so this compiles.
2001-01-23 01:22:32 +00:00
nonaka
8492c6a9e8
Add prep installer
2001-01-16 16:53:57 +00:00
mrg
1f4e0ae80c
fix compile lossage on i386.
...
move some data & a function from bsddisklabel.c to disks.c.
2001-01-14 23:45:16 +00:00
mrg
d436dd6641
extend sysinst disk handling, some general clean ups, better /etc support
...
and some sparc64 fixes. details:
- new scripting_{,v}fprintf() that also write to the script log (if open).
- support of creation of LFS filesystems
- standard installs now allow one to choose which file systems to create,
out of the list of /usr, /var, /home, MFS /tmp, and swap. a / is always
created, but the rest all optional. [*]
- new disklabel method: use existing. this requires one to fill in the
mount points (and having at least a "/" is enforced).
- preservation of existing filesystems (at install) is supported.
- rewrote most of make_fstab(): the entire thing is generated from the
bsdlabel now, rather than hard coding / to 'a' and swap to 'b'. create
MFS /tmp if requested.
- if IPv6 support isn't present, don't display any ipv6 messages.
- better rc.conf support
- sparc & sparc64 default to "cylinders" now.
- choosing "standard" instead of "standard with X" de-selects the X pkgs
by default.
- sparc64: don't install bootblocks until we have a complete system, avoids
booting with no /dev/console.
- sparc64: bump STDNEEDMB, it is way low.
[*] i have added default values for DEFVARSIZE & DEFUSRSIZE (this is used
only if /usr and /home are selected) to each port, based on STDNEEDMB. as
such, my guesses might be wrong so port maintainers should look at these.
2001-01-14 02:38:13 +00:00
jdc
6b6028160d
Use wrefresh(curscr) instead of clearok().
...
Suggested by Thomas Dickey.
2001-01-07 13:07:57 +00:00
lukem
de983b4cb1
use more standard %ll_ in favour of %q_
2001-01-04 16:17:14 +00:00
jdc
885c8eaa06
Be paranoid and do a clearok() before we do a refresh().
2000-12-31 13:08:05 +00:00
mrg
24939a4846
don't use -Os on sparc64, it causes a ICE in gcc 2.95.2.
2000-12-27 08:12:01 +00:00
mrg
8da46e6897
de-__P()-ify
2000-12-22 10:12:12 +00:00
mrg
c5e19f6801
s/sparc/sparc64/ in some comments.
2000-12-22 04:43:54 +00:00
jdc
dab8e56b56
Don't output the termcap `cl' sequence.
...
XXX: do we really need to home the cursor here?
XXX: should we do clearok() instead or in addition?
2000-12-21 21:42:00 +00:00
hubertf
db8b15ae28
A sane distrib doesn't only need etc.tgz and kern.tgz, but also base.tgz.
...
Check for it!
Fixes PR 11634 by Wayne Berke <wayber@rcn.com>
2000-12-18 09:39:50 +00:00
hubertf
55e87ae551
Do not tell the user we've newfs'd his disks when upgrading.
...
May safe him a heart attack or two.
Fixes PR 9655 and some others.
2000-12-18 09:18:46 +00:00
hubertf
3df3bcf30b
Fix typo in calculation of partition's end (s/mbrp_size/mbrp_start/).
...
Fix reported in PR 7556 by Arne Juul <arnej@math.ntnu.no>
2000-12-18 04:52:52 +00:00
jmc
927b45cf65
After confirming the network setup should be saved, make sure dhcp is enabled if it was used on install
2000-12-17 22:55:53 +00:00
jmc
c111d88861
Add makefile goo so it'll properly rebuild the menu files if osrelease.sh changed
2000-12-17 09:22:47 +00:00
mrg
900169f00c
minor KNF.
2000-12-06 04:53:37 +00:00
wiz
8ebc8eafe0
Fix typos in comments.
2000-12-04 22:47:02 +00:00
wiz
a6e6452673
Remove some items I believe fixed/done. Coreect speilnk.
2000-12-04 20:27:02 +00:00
minoura
fa875fd970
Welcome message `If you booted from a floppy,...' is somewhat port-specific
...
instruction.
Create md_hello message and move that message to it.
Port-maintainers: please reflect the reality of your port.
Someone who can write french: please correct *.fr catalogue.
2000-12-03 01:54:46 +00:00
tv
756cce5b1b
Don't blindly write block 0 -- try reading it in, zero only the Sun label
...
section, and then write it back. This allows other boot installers to work
*before* running mksunbootcd (saving space from rounding in some cases).
2000-11-29 19:47:31 +00:00
ad
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
simonb
c4a144e6ed
Close list_file after we're finished with it.
2000-11-26 01:11:26 +00:00
fvdl
c13641ea40
NULL for the highest split set file for the xmisc set is wrong, make it "aa"
...
Also, correct the xserver split set extension.
2000-11-23 16:26:50 +00:00
abs
1d655fabae
Try to upgrade a.out libraries. Currently just cut & pasted from the i386 port
2000-11-16 15:02:46 +00:00
tv
c6610a4af0
Back out 1.75 by request of fvdl.
2000-11-15 20:07:39 +00:00
hubertf
9303852347
All sysinst ports automatically set rc_configured=YES now, so delete
...
that text after install/upgrade. Hint at disabling/enabling services
in /etc/rc.conf though.
Noted in PR 11499 by Peter Seebach <seebs@plethora.net>
2000-11-14 23:03:35 +00:00
fvdl
3f3dfb39a3
For filesystem checks, skip any 'noauto' entries. Avoids problems
...
when upgrading a system that has a 'noauto' entry for a floppy
or CD device that has type ffs.
2000-11-14 13:27:49 +00:00
fvdl
3c20e1e72d
Add a message saying that a /emul or /emul/aout symlink has been renamed
...
to .old.
2000-11-12 15:33:26 +00:00
fvdl
f86b12aaef
Handle existing /emul symlink better when it points to nothing; same
...
with /emul/aout. Prevents unexpected sudden exits because during
aout lib move in upgrade.
2000-11-12 15:28:48 +00:00
fvdl
350e232678
Wrap checking the BOOTMODEL env var in DEBUG, it was intended for that
...
purpose originally, and this check only messes up selection of the
right kernel for the laptop install set.
2000-11-07 01:14:22 +00:00
fvdl
c0ffae8285
Oops, add missing space after '-c 3'.
2000-10-31 16:02:06 +00:00
fvdl
ddfa644677
-c 2 -> -c 3
2000-10-31 11:19:50 +00:00