not been compiled in a very long time. With some minor changes, it was
possible to make it compile:
Use kmem_zalloc()/kmem_free() instead of alloca()/memset().
Use %zu and %zx for printf'ing bus_size_t.
Delete the declaration of an unused local variable.
- cardbus_intr_disestablish(cc, cf, ih);
+ Cardbus_intr_disestablish(ct, ih);
- ih = cardbus_intr_establish(cc, cf, ...);
+ ih = Cardbus_intr_establish(ct, ...);
Compiles. Untested. Let me know if you use this hardware with NetBSD
any longer.
- cardbus_intr_disestablish(cc, cf, ih);
+ Cardbus_intr_disestablish(ct, ih);
- ih = cardbus_intr_establish(cc, cf, ...);
+ ih = Cardbus_intr_establish(ct, ...);
Tested with ath & atw units on a Soekris net4521.
Cardbus_conf_{read,write}() instead of cardbus_conf_{read,write}().
Delete all of the CARDBUS_ constants and macros that replicate PCI_.
Compile-tested, only.
Stop calling (*cardbus_ctrl) to enable bus mastering, I/O and memory
spaces on the CardBus bridge. cbb(4) always enables that stuff,
anyway. In the process, avoid remembering what BAR we mapped by
writing CARDBUS_{IO,MEM}_ENABLE to sc_cben or sc_cbenable, and
record the BAR in use sc_bar, instead.
Replace more CARDBUS_ constants with PCI_ constants.
Compile-tested, only.
substitution: for all practical purposes, pcitag_t and cardbustag_t are
interchangeable, so just use pcitag_t. Ditto pcireg_t and cardbusreg_t.
Poison new uses of cardbusreg_t and cardbustag_t by deleting the type
definitions.
and non-const types, and the kernel uses both const and non-const
PMF qualifiers and device suspensors, so change the pmf_qual_t and
device_suspensor_t typedefs from "pointers to const" to non-pointer,
non-const types.
substitution: for all practical purposes, pcitag_t and cardbustag_t
are interchangeable, so just use pcitag_t. Ditto pcireg_t and
cardbusreg_t.
While I'm here, don't make a copy (sc_intrline) of
cardbus_attach_args.ca_intrline unless we use it, later.
and make suspension by self, by drvctl(8), and by ACPI system sleep
play nice together. Start solidifying some temporary API changes.
1. Extract a new header file, <sys/device_if.h>, from <sys/device.h> and
#include it from <sys/pmf.h> instead of <sys/device.h> to break the
circular dependency between <sys/device.h> and <sys/pmf.h>.
2. Introduce pmf_qual_t, an aggregate of qualifications on a PMF
suspend/resume call. Start to replace instances of PMF_FN_PROTO,
PMF_FN_ARGS, et cetera, with a pmf_qual_t.
3. Introduce the notion of a "suspensor," an entity that holds a
device in suspension. More than one suspensor may hold a device
at once. A device stays suspended as long as at least one
suspensor holds it. A device resumes when the last suspensor
releases it.
Currently, the kernel defines three suspensors,
3a the system-suspensor: for system suspension, initiated
by 'sysctl -w machdep.sleep_state=3', by lid closure, by
power-button press, et cetera,
3b the drvctl-suspensor: for device suspension by /dev/drvctl
ioctl, e.g., drvctl -S sip0.
3c the system self-suspensor: for device drivers that suspend
themselves and their children. Several drivers for network
interfaces put the network device to sleep while it is not
administratively up, that is, after the kernel calls if_stop(,
1). The self-suspensor should not be used directly. See
the description of suspensor delegates, below.
A suspensor can have one or more "delegates". A suspensor can
release devices that its delegates hold suspended. Right now,
only the system self-suspensor has delegates. For each device
that a self-suspending driver attaches, it creates the device's
self-suspensor, a delegate of the system self-suspensor.
Suspensors stop a system-wide suspend/resume cycle from waking
devices that the operator put to sleep with drvctl before the cycle.
They also help self-suspension to work more simply, safely, and in
accord with expectations.
4. Add the notion of device activation level, devact_level_t,
and a routine for checking the current activation level,
device_activation(). Current activation levels are DEVACT_LEVEL_BUS,
DEVACT_LEVEL_DRIVER, and DEVACT_LEVEL_CLASS, which respectively
indicate that the device's bus is active, that the bus and device are
active, and that the bus, device, and the functions of the device's
class (network, audio) are active.
Suspend/resume calls can be qualified with a devact_level_t.
The power-management framework treats a devact_level_t that
qualifies a device suspension as the device's current activation
level; it only runs hooks to reduce the activation level from
the presumed current level to the fully suspended state. The
framework treats a devact_level_t qualifying device resumption
as the target activation level; it only runs hooks to raise the
activation level to the target.
5. Use pmf_qual_t, devact_level_t, and self-suspensors in several
drivers.
6. Temporarily add an unused power-management workqueue that I will
remove or replace, soon.
and remove bogus casts around ahc_detach().
XXX: There is a pmf_device_deregister(9) call in ahc_detach()
XXX: while there is no pmf_device_register(9) in ahc_attach().
XXX: It looks more pmf(9) stuff is required for cardbus detach.
Call the detach routine for every device in the device tree, starting
with the leaves and moving toward the root, expecting that each
(pseudo-)device driver will use the opportunity to gracefully commit
outstandings transactions to the underlying (pseudo-)device and to
relinquish control of the hardware to the system BIOS.
Detaching devices is not suitable for every shutdown: in an emergency,
or if the system state is inconsistent, we should resort to a fast,
simple shutdown that uses only the pmf(9) shutdown hooks and the
(deprecated) shutdownhooks. For now, if the flag RB_NOSYNC is set in
boothowto, opt for the fast, simple shutdown.
Add a device flag, DVF_DETACH_SHUTDOWN, that indicates by its presence
that it is safe to detach a device during shutdown. Introduce macros
CFATTACH_DECL3() and CFATTACH_DECL3_NEW() for creating autoconf
attachments with default device flags. Add DVF_DETACH_SHUTDOWN
to configuration attachments for atabus(4), atw(4) at cardbus(4),
cardbus(4), cardslot(4), com(4) at isa(4), elanpar(4), elanpex(4),
elansc(4), gpio(4), npx(4) at isa(4), nsphyter(4), pci(4), pcib(4),
pcmcia(4), ppb(4), sip(4), wd(4), and wdc(4) at isa(4).
Add a device-detachment "reason" flag, DETACH_SHUTDOWN, that tells the
autoconf code and a device driver that the reason for detachment is
system shutdown.
Add a sysctl, kern.detachall, that tells the system to try to detach
every device at shutdown, regardless of any device's DVF_DETACH_SHUTDOWN
flag. The default for kern.detachall is 0. SET IT TO 1, PLEASE, TO
HELP TEST AND DEBUG DEVICE DETACHMENT AT SHUTDOWN.
This is a work in progress. In future work, I aim to treat
pseudo-devices more thoroughly, and to gracefully tear down a stack of
(pseudo-)disk drivers and filesystems, including cgd(4), vnd(4), and
raid(4) instances at shutdown.
Also commit some changes that are not easily untangled from the rest:
(1) begin to simplify device_t locking: rename struct pmf_private to
device_lock, and incorporate device_lock into struct device.
(2) #include <sys/device.h> in sys/pmf.h in order to get some
definitions that it needs. Stop unnecessarily #including <sys/device.h>
in sys/arch/x86/include/pic.h to keep the amd64, xen, and i386 releases
building.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
