- Set XS_TIMEOUT on a selection timeout condition.
- Do not bother to call AscStartChip() in AscResetChipAndScsiBus()--
just clear the chip status.
- Make sure address is word-aligned in AscWriteLramByte().
Tested on my adv (AdvanSys ABP-9xxUA) with CRW8424S and UMAX SuperVista S-12.
Earlier versions of the system would get stuck trying to recover from error
conditions when the CD-RW drive was in heavy use. I have not seen that
behavior with these small patches.
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
was being initialized to a KVA, when we really wanted a DMA address. Change
the code to allocate the overrun buffer with the control blocks, and
properly initialize overrun_buf.
Note that overrun_buf cannot actually be shared between all boards; DMA safe
memory could vary from bus to bus.
Garbage-collect two functions which are no longer used because of the
above changes.
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090, from Matt Jacob.
briggs