Commit Graph

156 Commits

Author SHA1 Message Date
mhitch f7a303efc6 Machine-dependent loadfile() support for booting. 2001-10-15 21:01:34 +00:00
pooka 3518dc8ed0 * fix thinko in mace_print() to prevent intr with value MACECF_INTR_DEFAULT
from getting printed
* fetch device name from dv_xname instead of using hardcoded value
2001-10-11 15:17:42 +00:00
pooka e45292cb5e panic in cpu_initclocks() if clock device is not attached 2001-10-10 13:24:47 +00:00
pooka 4eea26606e read dbaud from ARCS and use that for com rate, not hardcoded 38400 2001-10-08 15:53:07 +00:00
simonb 62274f02ea Use ${KERNLDSCRIPT} instead of hard-coded ld script name. 2001-10-08 10:14:41 +00:00
pooka 527cf2d2b1 use kern.ldscript instead of kern.ldscript.be per new scheme 2001-10-05 14:57:18 +00:00
mhitch a52fa14deb Run vfs_shutdown() if NOSYNC is *not* set, rather than set. 2001-09-24 03:56:03 +00:00
manu 2d16421460 Moved COMPAT_LINUX config stuff from arch/sgimips to arch/mips, so that it's
available on all Mips ports.
2001-09-23 19:45:41 +00:00
manu 142bd48453 config stuff for COMPAT_LINUX 2001-09-22 21:30:15 +00:00
rafal 0143775c35 If OSLoadOptions is set to auto, boot straight to multi-user. Requested
one too many times and it seems to do no harm, so enable it.
2001-09-22 16:26:34 +00:00
rafal e613cff3c5 Obey the RB_POWERDOWN flag passed to cpu_reboot; make it work on the Indy
by enabling the FPU before jumping back to ARCS (gross, but necessary!).
2001-09-18 05:19:29 +00:00
wdk 151ad65334 Fix obvious typos: swapdev set to incorrect major number preventing
kernel from accessing swap device.
2001-09-17 09:33:41 +00:00
chris 0e7661f023 Update pmap_update to now take the updated pmap as an argument.
This will allow improvements to the pmaps so that they can more easily defer expensive operations, eg tlb/cache flush, til the last possible moment.

Currently this is a no-op on most platforms, so they should see no difference.

Reviewed by Jason.
2001-09-10 21:19:08 +00:00
rafal 39c82fe985 Use the newly committed imcreg.h to get rid of the magic numbers polluting
this file; while I'm here, rework the GIO arbitrator parameter setup to
match more closely what is done by lunix on the same hardware... Finally,
on a tip from Wilbern Cobb, preserve the graphics-related bits of the
GIO arbitrator parameter register from the PROM-initialized settings so
ARCS console on the graphics display works (tested on both my Indy with
Newport and my Indigo2 with XL gfx).
2001-09-10 15:36:19 +00:00
rafal efa747227e Register defines for the SGI MC memory controller. Not 100% complete, but
has enough register/bit definitions to get rid of all the magic numbers that
currently pollute imc.c
2001-09-10 14:13:31 +00:00
simonb a41b7a380e Clean up and standardise across MIPS ports. 2001-09-09 04:20:25 +00:00
simonb 099f117735 Standardise the format of MIPS' <machine/db_machdep.h>. 2001-09-04 07:43:29 +00:00
simonb 62fb390c64 May as well include <mips/cpuregs.h> in <mips/cpu.h> once rather than
in every MIPS port's <machine/cpu.h>.
2001-09-04 06:23:15 +00:00
simonb 214f5366ea Centralise struct cpu_info declaration and related info to <mips/cpu.h>. 2001-09-04 06:19:21 +00:00
simonb a6b8c86af0 Remove an unneeded comment; ``sync'' with other "just include <mips/foo.h>"
files.
2001-08-31 03:53:22 +00:00
wdk 12a212bc5c Add support for WD33C93 controller and assosiated SCSI devices, and enable
by default.
2001-08-19 03:20:36 +00:00
wdk 0ac0d0d4e4 Initial implementation of WD33C9x SCSI driver for SGI IP22 platforms.
Based on mvme68k and Atari drivers for the same chipset with the
addition of bus_space support.  Attempts have been made to seperate out the
machine dependent dma components and more work is required in this area.

Tested on SGI R4K Indy, but has little testing on other platforms.
2001-08-19 03:16:21 +00:00
wdk 83cb8b7f0a If the boot device cannot be determined don't return an un-initialized
pointer.
Prevents garbage when asking for root device at startup.
2001-08-08 11:35:12 +00:00
thorpej babefc5331 Add BUS_DMA_READ and BUS_DMA_WRITE flags, that hint the back-end
at dmamap load time that the mapping will be used for a unidirectional
transfer of the specified direction.
2001-07-19 15:32:10 +00:00
thorpej ce8c5df2c6 Count and display the number of CPUs present on the system. 2001-07-09 02:00:19 +00:00
thorpej 8ea809324e Fill in cpu_model[] 2001-07-09 00:30:35 +00:00
thorpej af0e157b66 - Use the identifier strings that are fetched by the MI ARC BIOS
code.
- Garbage-collect some non-useful stuff from the mainbus_attach_args.
2001-07-08 23:59:31 +00:00
thorpej edeeafe82b bcopy -> memcpy, bzero -> memset 2001-07-08 21:04:50 +00:00
thorpej 2b351e4a6f - If the multicast address list changes, make sure to kick the chip.
- Remove unnecessary includes.
- Slight cosmetic change in sq_start().
2001-07-08 20:57:34 +00:00
thorpej e9fd7a6a2b Use sys/dev/arcbios. 2001-07-08 20:30:13 +00:00
wdk 962a2e51fb Add typical KGDB settings, and leave commented out. 2001-07-07 23:17:58 +00:00
wdk bda50bcdd4 - Finish off KGDB kernel debugger support for sgimips 2001-07-07 23:13:25 +00:00
rafal 5b1c3b74ba Remove externs moved to headers, fix interrupt masks to be zeroes at startup,
add MIPS clock interrupt (int5) event counter and clean up some more debug
goo.
2001-06-14 01:15:35 +00:00
rafal d9d912728f Get rid of externs moved to header files, add event counter for the clock
interrupt, use platform.ticks_per_hz instead of hardcoded constant for the
counter increment (XX: not that the ticks_per_hz is calculated for the IP32
yet).
2001-06-14 01:09:37 +00:00
rafal 3327706cab Add externs for struct platform and the machine type definitions (mach_type,
mach_subtype, mach_boardrev).
2001-06-14 01:06:08 +00:00
rafal 68306a9bf0 Implement a db_trap_callback which turns off the watchdog on entry to DDB
and turns it back on on exit.  Hook the callback in early in the boot, so
it's there as soon as DDB is available.
2001-06-13 12:34:24 +00:00
thorpej 37c37861b9 Make sure to always re-sync the rx buffer dmamap if recycling the
rx buffer.
2001-06-08 14:32:05 +00:00
simonb e5bd00e48d For ports that wire up pciide in compatibility mode, have
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.

Ports that don't need to do this no longer need to supply a
dummy function.
2001-06-08 04:48:54 +00:00
rafal a8bb9b127a All soft interrupts are currently handled by soft interrupt 1, so make
all splsoftxxx() calls block soft interrupt 1 and make spllowersoftclock()
re-enable soft interrupt 1.

XXX: This needs to be reworked so that spllowersoftclock() only turns on
softclock interrupts, not all soft interrupt.  That change is coming soon.
2001-06-08 00:09:28 +00:00
rafal 86d8f950ef Fix initial interrupt mask settings for `hard' interupts to mask out soft
interrupts as well.  The system is quite stable now that soft interrupts
don't pop up at random places where they're unexpected 8-)

Also, while here, fix CPU clock speed calculation for the Indy.
2001-06-08 00:02:41 +00:00
thorpej 0859a7601d - Differentiate beteen the 8003 and 80c03 (the 80c03 has some additional
features).
- Implement crude multicast support -- enable reception of all multicast
  frames if we have any addresses on the multicast list.  TODO: use the
  64-bit hash table on the 80c03.
- Implement promiscuous mode.

IPv6 doesn't quite work yet -- DAD finds a duplicate for the
link-local.  The 8003 hears its own transmissions, but IFF_SIMPLEX
is not set, so I'm a little confused.
2001-06-07 23:05:51 +00:00
thorpej b4e0748bf3 Don't use PCLK as the baud rate generator, as the Indy doens't
like that, and it has no effect on the Indigo2.
From Christopher SEKIYA <wileyc@rezrov.net>.

Also, query the "ConsoleOut" ARCS variable (i.e. "what the console
really is") rather than "console" ("what the console is configured
as").
2001-06-07 19:23:03 +00:00
thorpej a7df60e8e9 Pass -N to the linker, so that it will generate a single PT_LOAD
section (a'la OMAGIC).
2001-06-07 15:26:31 +00:00
rafal a1830df1bb Fix a deadlock in the tx code -- the code checked the DMA status before
sync'ing the descriptor, leading to a race where the packet could complete
after the DMA check but before the sync of the descriptor, sending the code
into unknown territory and the DMA engine into space.  Also, fix a bug with
spurious watchdog resets going off due to the if_timer not always being set
on transmit.

Finally, clean up use of hardcoded magic numbers, get them from hpcreg.h
when possible.
2001-06-07 12:20:42 +00:00
rafal 63f856cb2e Add a bunch of defines for bits withing the ethernet-related registers so
the Seeq driver can use them instead of hardcoded constants.
2001-06-07 12:10:34 +00:00
chs 821ec03ed9 replace vm_map{,_entry}_t with struct vm_map{,_entry} *. 2001-06-02 18:09:08 +00:00
mrg 67afbd6270 use _KERNEL_OPT 2001-05-30 11:57:16 +00:00
chs 11a9651c8f replace vm_page_t with struct vm_page *. 2001-05-26 21:27:10 +00:00
matt 4eaed60c97 Add IP32 2001-05-14 17:59:22 +00:00
matt 50522d3e8f Add null ip32_bus_reset. Add cpu_intr_establish which calls
crime_intr_establish.  XXX cpu_intr_establish needs to have the
"normal" intr_establish arguments.
2001-05-14 17:56:36 +00:00