71364ebea6
Workaround problem with le driver forgetting its address
1998-10-09 06:14:22 +00:00
3d8c929799
Remove define for SUPPORT_BOOTPARAMS and put in the Makefile instead.
...
Fix DHCP code so it works.
1998-10-09 06:13:30 +00:00
7d79b82d33
include <bsd.prog.mk> and make changes so that "make obj" works.
...
Make it easy to build an boot which uses BOOTP/DHCP instead
RARP/BOOTPARAMS.
1998-10-09 06:12:31 +00:00
bbf29cff44
Add strncpy (needed for bootp/dhcp). Tighten up some of the assembly.
1998-10-09 06:09:48 +00:00
d681cf055a
configure() prototype is in <sys/device.h>
1998-10-06 20:50:15 +00:00
fedd39b57d
Provide configure(), rather than open-coding it in cpu_startup().
1998-10-06 20:46:01 +00:00
75f5ffdf21
Change backplace0 to mainbus0 (for consistency with other ports).
...
Remove unused function protocols from ka410.h and ka43.h
Fix some ka46 missing references
1998-10-06 04:04:30 +00:00
af8a94ec80
Code references should use movab, not moval. Fix gas-2.9.1 complaints
...
with intvec.s
1998-10-06 02:07:30 +00:00
5006dbf868
cpu_set_kpc() prototype is already in <sys/systm.h>.
1998-10-05 22:11:15 +00:00
41c0179c3c
use old sigmask in sigcontext and old sigreturn syscall in Ultrix
...
emulation mode
1998-10-02 19:25:33 +00:00
cfd3302aa1
Need more room for signal mask
1998-10-01 19:00:06 +00:00
6530a14556
Typo.
1998-09-30 18:40:04 +00:00
c0b9fc5616
Make kernel compile after recent signal changes.
1998-09-30 14:09:59 +00:00
b9a131261c
Define the new sigcontext structure.
1998-09-17 04:54:51 +00:00
70e641047c
In cpu_coredump(), use MID_MACHINE rather than MID_* (whatever it expands
...
to).
1998-09-09 11:17:24 +00:00
8abe0d6b1c
Adjust for the new "reaper" kernel thread: do not free the vmspace and
...
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
1998-09-09 00:07:48 +00:00
c9db84ecc9
distclean is a synonym for cleandir
1998-09-05 15:15:14 +00:00
58831dae59
Bug fixes and improvements. By Roar Thronæs and myself.
1998-08-31 19:20:24 +00:00
25f04a8abb
Support for all 4 console lines on KA820. Support for this written
...
by Sergey Svishchev (svs@ropnet.ru ).
1998-08-31 18:43:28 +00:00
5fa7eee1ff
don't define __BUS_SPACE_COMPAT_OLDDEFS by default. As stated in
...
bus_space(9), if drivers want it (they shouldn't; easy to convert) they
can define it right before including bus.h. There's been a release since
the interfaces were (slightly) changed, and no code in the source tree
uses the old interfaces as far as I can tell.
1998-08-30 23:40:14 +00:00
218681f3e5
Kernel stach should be 4K, not 32K. Increase MCLSHIFT to 11.
...
Remove ovbcopy().
1998-08-25 17:35:23 +00:00
e727d1e031
Must #define __warn_references if not GNUC.
1998-08-22 12:12:38 +00:00
00475fbb1f
New times, new pagesize, use magic number in exec header.
1998-08-22 09:16:45 +00:00
6aba9c11ff
VAX logical page size increased to 4k.
1998-08-21 13:46:38 +00:00
b3574d3923
VAX logical page size increased to 4k.
1998-08-21 13:41:09 +00:00
f1a6a0936f
The VAX46 (VS4000) needs the clock stuff the VAX43 does...
1998-08-20 23:52:42 +00:00
fb9171df3d
Fix write/read of memory.
1998-08-20 16:47:11 +00:00
5232b66bd5
Initial steps to getting the VAX to use the MI driver framework.
1998-08-18 23:55:00 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
2c639fb882
Cache and microsecond clock resolution on KA46.
1998-08-11 17:52:57 +00:00
9f13823e62
Support for VS4000/60. Some needs-count -> needs-flag.
1998-08-10 14:48:53 +00:00
c355f4a0ed
Support for VS4000/60.
1998-08-10 14:47:16 +00:00
2ff84b0fe4
Kickoff xmit interrupts, needed on chip DC7201.
1998-08-10 14:41:16 +00:00
972b94efc4
Basic support for VS4000/60.
1998-08-10 14:31:07 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
8fdb1c8ebe
Lots of kernlib functions rewritten as inline macros.
1998-08-08 11:18:32 +00:00
546365a27e
_POSIX_SOURCE -> _POSIX_C_SOURCE
1998-08-06 11:25:04 +00:00
e2a897639d
KNF (only include one of <sys/{param,types}.h>).
1998-08-05 16:50:39 +00:00
3ff8e6493a
Don't cast the null residual pointer passed to vn_rdwr().
1998-07-28 18:34:52 +00:00
da2e61d160
Delint.
1998-07-27 13:55:32 +00:00
a799083fba
Fix netboot support for 3100/m76 which uses diagmem for its lance buffers.
1998-07-26 09:01:23 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
50d1442817
Fix PMAP_NEW and make it the default.
1998-07-18 20:35:14 +00:00
d47ea67c1f
Define one page free list, and put all pages on it.
1998-07-08 04:43:18 +00:00
011f2bda08
defopt NS, NSIP.
1998-07-05 06:49:00 +00:00
5c0c5dd0b4
defopt ISO TPIP.
1998-07-05 04:37:35 +00:00
fe484937cf
defopt LLC
1998-07-05 03:14:41 +00:00
8db0fcdbf7
defopt CCITT.
1998-07-05 02:12:22 +00:00
3751946b97
defopt INET, NETATALK.
1998-07-05 00:51:04 +00:00
466e784ee1
defopt DDB.
1998-07-04 22:18:13 +00:00
f31b504207
Change not-in-tree drier stubs to use needs-flag, not needs-count,
...
and use needs-count only where acutally used (qvss, qdss, ts-11)
1998-07-02 07:55:29 +00:00
1aab7e8c23
Added boot program support for the SGEC Ethernet controller, present on
...
some VAX 4000 maachines. Written by Jay Maynard. (jmaynard@phoenix.net )
1998-07-01 10:52:10 +00:00
7b2ca7e1ba
RPB number for SGEC Ethernet controller (ze).
1998-07-01 09:37:11 +00:00
518a9a5b6a
Enable use of reversed and underlined text. The DEC Isolatin character
...
set now also work correctly. Add blinking cursor.
1998-06-30 11:29:37 +00:00
26e2c08399
add a dummy "mapchar" function (1:1 mapping, hope the font is isolatin)
1998-06-26 21:28:57 +00:00
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
21592147a1
defopt COMPAT_ULTRIX
1998-06-25 23:27:56 +00:00
971b8956ef
defopt KTRACE
1998-06-25 21:18:11 +00:00
77a5ddd69a
Fix more compile errors. Pointed out by David Brownlee.
1998-06-21 21:45:07 +00:00
4c45f96d05
adapt to wscons changes (character output call)
1998-06-20 21:56:40 +00:00
35e3b6dd86
Fix some compile-time warnings. Pointed out by David Brownlee.
1998-06-20 21:01:43 +00:00
a38dba55a5
Remove since long unused files.
1998-06-20 18:53:01 +00:00
abab40ee1c
Don't try to configure QDSS console on KA650 until it's fixed.
1998-06-20 18:49:27 +00:00
fecd3f54fc
Expand kmem map.
1998-06-20 18:47:33 +00:00
8458a9bd23
Support for glass tty on /m76.
1998-06-20 18:46:19 +00:00
05c6737a7e
Fix after current DDB changes.
1998-06-20 18:45:40 +00:00
3b6ba87592
These files have never been used; remove them.
1998-06-20 18:44:16 +00:00
ec35b60cdb
Fast fix to make VS keyboard work again after wscons changes.
...
XXX - This will be done in a better way in the future.
1998-06-20 18:42:50 +00:00
1fbd0b3749
GC the unused `physadr' type, which was not able to hold a complete physical
...
address on 2 architectures anyhow. Also, move the definition of the `label_t'
type inside _KERNEL protection, since it is specific to the in-kernel
setjmp()/longjmp() implementations.
1998-06-14 20:09:22 +00:00
a4d0eae36b
Add catch function for keyboard.
1998-06-14 11:52:35 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
b25b5bddd1
#ifdef _KERNEL whole this file.
1998-06-09 14:03:24 +00:00
f6a6201ac7
Bugfix; now VS3100/m76 also works.
1998-06-09 14:02:01 +00:00
8260bcaff5
Wall fixes.
1998-06-08 18:42:40 +00:00
3c3c83f7ad
Bugfix: use of uninitialised variable that gcc didn't notice.
1998-06-08 15:04:26 +00:00
74b990a7b4
Identify 3100/m38 + /m48
1998-06-07 20:20:05 +00:00
d360348f52
DDB support on glass tty. Also smarter keyboard decoding.
1998-06-07 20:19:12 +00:00
2f1d0864fe
UVM default on vax for now.
1998-06-07 18:39:15 +00:00
60530637e4
Enable use of secondary cache, if present.
1998-06-07 18:34:09 +00:00
1a900c4abc
Init some variables to not get trash on the screen.
1998-06-07 18:32:04 +00:00
08079a8f21
Don't compile in any rasterconsole code.
1998-06-05 22:17:02 +00:00
88d55c928c
Add virtual console support.
1998-06-05 22:02:56 +00:00
57ce421691
Clean upp system detect code. Enable primary cache on VS3100.
1998-06-04 19:42:14 +00:00
78ebccfc2d
Rudimentary support for the VS3100 builtin graphics console.
1998-06-04 15:51:12 +00:00
a7f360c6c9
Specify a non-profiling C rule.
1998-05-31 23:25:41 +00:00
a97fc2f180
If any of _ANSI_SOURCE, _POSIX_C_SOURCE or _XOPEN_SOURCE are defined, don't
...
provide any identifiers other than sig_atomic_t.
1998-05-25 20:59:01 +00:00
5fc912ddc9
Remove a forgotten debug printout.
1998-05-23 19:18:59 +00:00
b28c99b245
Fixed bug with lost characters in DDB output.
1998-05-23 12:49:30 +00:00
464d197e67
Remove unneccessary file. Remove stale dependency. Disable not-working
...
devices by default.
1998-05-22 09:59:55 +00:00
9251293f18
Remove unnecessary code for interrupt vector handling.
1998-05-22 09:49:07 +00:00
f4f1fcf563
Remove unnecessary code for interrupt vector handling.
1998-05-22 09:26:33 +00:00
d31979884b
Unused file for now - no more runtime decisions!
1998-05-21 14:33:14 +00:00
6568bc224e
Wall fix.
1998-05-21 13:16:14 +00:00
ce7c143e6c
Rewrite the autoconf code for VS3000's.
...
XXX - no support for any disks at all yet.
1998-05-21 13:10:59 +00:00
dda2be85ff
Small Wall fixes.
1998-05-21 13:06:24 +00:00
cd17c11c60
Support for DDB on DZ console.
1998-05-21 13:02:20 +00:00
6626878e7b
It is no longer necessary for pmap_pinit() and pmap_release() to be
...
pmap interface functions, as NetBSD no longer uses statically allocated
pmaps (except for the kernel pmap, which is special-cased anyhow).
1998-05-19 19:00:11 +00:00
3ebb9bfd11
Not used anymore when now using the dz11 driver.
1998-05-17 19:02:03 +00:00
baec63333c
Mod~ify for new changes to lance/dz drivers.
1998-05-17 19:00:56 +00:00
4c217a5bcb
Change to use newly committed ln- and dz-drivers.
1998-05-17 18:58:07 +00:00
25d68ddcde
Add vax-hacked lance device driver for vaxstations.
...
XXX - This is temporary; will go away when the troubles with the
MI driver is fixed.
1998-05-17 18:55:30 +00:00
4a469a9149
Split the DZ11 driver into two parts; can now use the same driver on
...
both unibus/qbus devices and vaxstations.
1998-05-17 18:51:13 +00:00
687ea7404c
Fix some arithmetics lossage on typeless pointers.
1998-05-08 16:55:15 +00:00
aa36ad1f55
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:01:41 +00:00
c085b89d78
Wall cleaning + a little better fault checking.
1998-05-03 13:22:01 +00:00
9aea445d54
Remove the ancient kernel-stack area at top of P1 region. Make PMAP_NEW
...
almost work. Also Wall cleaning.
1998-05-03 13:02:22 +00:00
9d5413a315
Enable -Wall -Wmissing-prototypes -Wstrict-prototypes.
1998-05-03 12:59:56 +00:00
1686aca01d
Pull in opt_gateway.h as appropriate.
1998-04-29 23:11:00 +00:00
a53c1863fe
Provide definitions for intptr_t and uintptr_t, signed resp. unsigned integral
...
types large enough to hold any pointer.
1998-04-27 17:39:10 +00:00
470ec523f2
Wall cleaning.
1998-04-13 12:15:56 +00:00
4bcd8130fe
t_wopen fixes.
1998-04-13 12:14:42 +00:00
eaeee62af2
Wall cleaning.
1998-04-13 12:10:26 +00:00
b21bfbde11
Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
...
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)
1998-04-12 23:47:41 +00:00
70f1f1a099
use dev/dec/lk201.h, fold back DELAY() changes from pmax lk201.c rev 1.7.
1998-03-22 09:37:47 +00:00
0dae91d9af
Eliminate uses of TS_WOPEN in hard-wired devices.
1998-03-21 22:52:59 +00:00
cad3cb3894
ubasetup() must be non-static. (used by QDSS)
1998-03-21 10:24:29 +00:00
cf02ad2bc9
Add support for QDSS graphic console. Code originated from 4.4BSD,
...
ported to NetBSD by Boris Gjenero <bgjenero@undergrad.math.uwaterloo.ca>
1998-03-21 10:02:39 +00:00
52defbf438
Use rom routines on MicroVAX II, so that the QDSS/QVSS display will
...
be used if present. Fix provided by Boris Gjenero.
1998-03-20 16:36:20 +00:00
9f50fca1fd
Add commented out "options FFS_EI"
1998-03-18 16:34:41 +00:00
52fbd35380
Add support for "root on qe".
1998-03-13 11:40:19 +00:00
51964fa1e8
Standalone routine for DEQNA, written by Roar Thronaes.
1998-03-11 22:13:55 +00:00
8e2874bf64
Support for UVM on VAXen.
1998-03-02 17:00:00 +00:00
ad1f451760
Move the boot program higher up in memory; to allow loading of bigger kernels.
1998-02-28 12:10:13 +00:00
1e3fb9012d
Type fix so that time get read correct on VS2000, from Ken Wellsch.
1998-02-22 14:19:39 +00:00
533de19431
Remove random.s.
1998-02-22 08:51:04 +00:00
dcfb8695ab
Move to libkern.
1998-02-22 08:50:17 +00:00
772da350d4
Disable the message buffer during crash dumps by clearing msgbufenabled,
...
not msgbufmapped.
1998-02-19 04:18:30 +00:00
5197bf8085
Minor changes.
1998-02-18 10:55:48 +00:00
f0a5dd43ce
Multiple-inclusion crap, correct precision of DBL_*, etc.
1998-02-18 10:54:10 +00:00
3bbb7f7d45
Move pmap_map() function definition to MD headers, as appropriate. It's
...
an internal function, and the VM system shouldn't try to prototype it.
(Note that some ports _don't_ prototype it.)
1998-02-18 02:05:32 +00:00
8354e68508
Remove "class" declarations, and add "devclass" declarations where
...
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
c5b2acd27f
Split out MSCP floppies as a separate device (rx) instead of handling
...
them as disk drives. It is now also allowed to change floppies without
the system complaining :-)
1998-02-08 14:03:45 +00:00
a355d0bc1b
Re-implement page reference bit emulation by using the (otherwise unused)
...
valid bit. This is faster than the "unmap all" solution that were described
in that Mach paper _and_ it eliminates the need for checking the wired bit.
As a result of this; swapping started working again on vax :-)
1998-01-31 12:17:34 +00:00
fe52d237fd
Fix to make vfork work on machines with separated PCB/mtpr PTE registers.
1998-01-27 17:35:03 +00:00
15ae963bea
When dumping, print out the device number as major,minor.
1998-01-24 16:46:23 +00:00
eda1eecede
Remove __BROKEN_INDIRECT_CONFIG and change all drivers to use
...
config_search instead.
1998-01-24 14:16:11 +00:00
01eb1bb746
Make kernel compile & run again after latest config changes.
1998-01-18 22:09:13 +00:00
afb1a37379
Fix page size initialisation.
1998-01-18 22:07:50 +00:00
37f6125fdd
Garbage-collect unnecessary functions. Don't have blkcpy/blkclr
...
as inline.
1998-01-18 22:06:01 +00:00
f32f947061
Update for changes to config.
1998-01-12 20:52:29 +00:00
6f57e5c573
multiple include protect machine/limits.h, fixes pr 4473 (from Mika Nystrom)
1998-01-09 22:23:44 +00:00
b46484bb8a
RCSID Police.
1998-01-05 20:51:25 +00:00
015e898c02
RCSID Police.
1998-01-05 07:02:46 +00:00
b9f1b716f3
Now that all ports have pmap_activate(), and it has an identical interface,
...
prototype it in <vm/pmap.h>
1998-01-03 01:12:59 +00:00
b73f9750f6
Don't allocate PTEs in cpu_fork(); they were allocated when the new
...
process's pmap was created. Instead, use pmap_activate() to load the
page {0,1} base and length registers into the PCB for the hardware's use.
1998-01-03 00:37:31 +00:00
aa58d4ac6b
Adjust for the fact that the page {0,1} base and length registers are now
...
stored in the pmap structure.
1998-01-03 00:35:28 +00:00
f267fe868d
- Adjust so that access to the PCB is not required in most pmap functions.
...
Store the page {0,1} base and length registers in the pmap structure,
and implement pmap_activate(), which stores them in the PCB (for the
hardware's use).
- Re-implement pmap_pinit(); allocate the PTEs here, not in cpu_fork().
1998-01-03 00:34:02 +00:00
172a9381b6
- Remove the PCB pointer from the pmap structure. Instead, store the
...
page {0,1} base and length registers in the pmap structure. They will
be loaded in to the PCB when the process's address space is activated
by way of pmap_activate().
- Remove pmap_pinit() macro; it's now a real function.
- Prototypes for pmap_pinit(), pmap_activate(), pmap_deactivate().
1998-01-03 00:28:43 +00:00
matt