2db5581a4c
Declare the mcclock_pad32_busfns variable as extern.
2000-02-11 02:36:16 +00:00
255608f126
Add support for a "RAID" partition type.
2000-02-11 02:04:42 +00:00
29ae6dbe05
We're given a K1SEG address already.
2000-02-11 01:32:42 +00:00
5f9e257c5a
Fix a couple of printf format botches. port-hp300/9388, Steve Peurifoy.
2000-02-10 23:02:16 +00:00
dc0ce1249b
fix interrupt handling
...
I still get lost interrupts on the A1200, but the problem is certainly
elsewhere (not in wdc_amiga).
2000-02-10 15:51:59 +00:00
ff0fe5df65
fix ip4 protosw.
...
gif interface and gre interface should be able to coexist.
2000-02-10 14:44:28 +00:00
1dc2d9d399
Don't display "NetBSD disklabel". This message appears too many times
...
if more than two or three disks exist.
2000-02-10 12:33:45 +00:00
d8595b9af3
map common memory 8 bit for cis scan when following longlinks.
2000-02-10 09:01:52 +00:00
44b423d73b
always map attr memory 8 bit, since its defined that way.
2000-02-10 09:00:19 +00:00
18452e3667
- add GPIO related comments.
...
- add IBM WorkPad z50 buttons.
2000-02-10 08:45:44 +00:00
709f6f50a2
show edge/level infomation in attach message.
2000-02-10 08:37:07 +00:00
e19b30ff0a
delete \n in cpu_model.
2000-02-10 08:34:08 +00:00
9621e6be50
Reset maxstray count if we get a good interrupt for a level.
2000-02-10 07:45:43 +00:00
13e13336b2
Allow (re)setting of maxstrays after establishment of a shared interrupt.
...
This allows sporadic stray interrupt counts to be reset by an acknowledgement
of the same interrupt.
2000-02-10 07:45:02 +00:00
4821b5ae2f
Guard against trying to disable an interrupt where we'd dereference a
...
bad pointer.
2000-02-10 04:31:36 +00:00
1dd1e143a9
add machine model name to cpu_model.
2000-02-10 02:15:01 +00:00
549e292ae4
update MINYEAR.
2000-02-10 02:06:16 +00:00
d129ec5214
Fix typo in error message
2000-02-09 23:25:15 +00:00
a10113c83a
fix a couple of things to (hopefully) make this work on the A1200
2000-02-09 22:27:20 +00:00
d40e2b51ee
add detach code
2000-02-09 22:15:57 +00:00
39db0e9c7e
Three MULTIPROCESSOR + LOCKDEBUG fixes:
...
1) fix typo preventing compilation (missing comma).
2) in SLOCK_WHERE, display cpu number in the MP case.
3) the folowing race condition was observed in _simple_lock:
cpu 1 releases lock,
cpu 0 grabs lock
cpu 1 sees it's already locked.
cpu 1 sees that lock_holder== "cpu 1"
cpu 1 assumes that it already holds it and barfs.
cpu 0 sets lock_holder == "cpu 0"
Fix: set lock_holder to LK_NOCPU in _simple_unlock().
2000-02-09 16:46:09 +00:00
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
67bc20747a
Support Xircom CompactCard Ethernet CFE-10.
2000-02-09 14:54:53 +00:00
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
968822bd48
The pwctl writes ZERO as on if active=0.
2000-02-09 14:39:06 +00:00
dc87f2899f
- No need to keep track enable/disable state here. The smc91cxx.c also
...
manages it.
- Disestablish an interrupt when failed to enable card.
- Don't say I'm enabled if failed to enable card.
2000-02-09 13:40:42 +00:00
94a6dd9169
Regen.
2000-02-09 13:33:22 +00:00
947c0fee74
Add an entry for Planex FNW-3700-T.
2000-02-09 13:32:23 +00:00
e729d284ad
Add an entry for Melco LPC3-TX.
2000-02-09 13:20:55 +00:00
502ad73200
Add wsfont options.
2000-02-09 13:10:15 +00:00
dcb9f03bd3
Use dev/rasops instead of dev/rcons.
2000-02-09 13:08:35 +00:00
e92b285eaf
Add an entry for Xircom CompactCard Ethernet CFE-10.
2000-02-09 13:07:45 +00:00
0694de05ed
Fix Work Pad z50's entry.
2000-02-09 13:03:31 +00:00
0867c09dad
Change va_arg definition when __lint__ is defined.
2000-02-09 12:54:47 +00:00
19e9558eaf
sync with extended scoped address syntax change.
2000-02-09 12:27:03 +00:00
ad591b78f4
CLOCK_RATE: 256-> 128.
...
reduce timer interrupts because hpcmips machines are lower cpu power.
2000-02-09 10:41:18 +00:00
9fb475bc29
Missing commit to reflect ioasicreg.h merge.
2000-02-09 08:37:43 +00:00
43917001c7
- Add missing "opt_ddb.h" to dc.c and dtop.c (oh, boy)
...
- Nuke irrelevant "dcvar.h" and "tc.h" inclusion from dc.c
- Put '#if NRASTERCONSOLE > 0' around scc_lk201_cnattach().
2000-02-09 08:29:40 +00:00
0a1d6b1357
Make it compile with options DEBUG.
...
Reported by Kawamoto Yosihisa (PR #9379 ).
2000-02-09 07:57:52 +00:00
7f5a7c00ac
fix include file.
...
<netinet6/ip6.h> -> <netinet/ip6.h>
2000-02-09 05:48:26 +00:00
53e333c935
honor ifa reference counting.
2000-02-09 03:34:01 +00:00
541b446bfa
for more strict rfc2367 conformance, move netkey/keyv2.h into net/pfkeyv2.h
...
(net/pfkeyv2.h used to just include netkey/keyv2.h).
netkey/keyv2.h includes #error only for several days, to inform
of file path change. after that I plan to nuke the file.
2000-02-09 03:27:29 +00:00
f9e531f1e4
Don't force BWX on Pyxis by default; it's just not reliable enough.
2000-02-09 01:39:20 +00:00
59d74f3d21
to improve RFC2553/2292 compliance, and promote use of
...
RFC2553/2292-compliant header file path, now the following headers are
forbidden:
netinet6/ip6.h
netinet6/icmp6.h
netinet6/in6.h
if you want netinet6/{ip6,icmp6}.h, use netinet/{ip6,icmp6}.h.
if you want netinet6/in6.h, you just need to include netinet/in.h.
it pulls it in.
(we may need to integrate them into netinet/in.h, but for cross-BSD code
sharing i'd like to keep it like this for now)
2000-02-09 00:54:55 +00:00
4f53db2499
optimize mbuf allocation for ip/tcp/tcpopt part.
2000-02-09 00:50:40 +00:00
ec02ebc8a0
Adjust for IOASIC register changes.
2000-02-09 00:33:03 +00:00
a62753d0b7
Make OF-2.x can also find root device.
2000-02-08 20:02:13 +00:00
76c14cd322
Don't stall the control pipe on error.
2000-02-08 18:46:03 +00:00
e922214fb2
Use NULL instead of 0.
2000-02-08 18:45:27 +00:00
3bc7ce8d31
Cast bus_size_t to u_long for printing.
2000-02-08 18:40:51 +00:00
simonb