of available test candidates. It uses the previously unused (as far as I
can tell) Timer D, in freerunning mode. It only uses a 1/200 prescaler
(20KHz), as anything faster would roll over too fast for the system timer.
(Gotta love 8-bit resolution timers!) Approved for untested commit by core@.
This gets rid of the now-unneded "todclock" and "todservice" attributes
from the footbridge device files, which should allow netwinder to build
again after its conversion to generic TODR.
Resulting kernel verified to boot up OK on gxemul (after my recent
fixes of the gxemul package to emulate free-running timers).
- add a new entry point for idle called idle_switch that is called by
cpu_switch() in the MP case when sched_whichqs is zero, properly
setting up the idle stack. from petrov@ via martin@.
- for the IPI case, avoid loading the address of intrlev into %g3
- remove some NOT_DEBUG code
- load the interrupt argument #2 in the delay slot
this removes 2 nops during interrupt processing for the normal
case, and an additional 2 ALU instructions for IPIs
- initialise bootcpu->ci_{cpcb,initstack}/proc0paddr from the
idle u area.
pmap_extract():
- make this work on the kernel interrupt stack as well
both of these are from petrov@ via martin@.
pmap_update(): XXX mark the MULTIPROCESSOR call to smp_tlb_flush_all().
so replace a branch with a 'sir'
- in #if 0 code, in sparc64_ipi_flush_pte() and sparc64_ipi_flush_ctx()
save/restore the out registers that the sp_tlb_flush_xxx() versions
around calling them
- in sp_tlb_flush_pte() and sp_tlb_flush_ctx(), replace global register
usage with out registers so that we don't clobber the (alternate)
global registers when these are called from IPI context
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
_{files,dns,yp}_getenetbyaddr() functions from unsigned long to uint32_t.
In rev 1.29, getnetbyaddr(3) was changed to take uint32_t `net' argument
and also passisng uint32_t `net' to nsdispatch(3) varargs, but
these callback functions were not changed accordingly.
Patch was provided by christos, and this fixes amd(8) coredumps on alpha
when /etc/nsswitch.conf has more than one sources for netgroups.
now since some chipset revisions will freak out on the aparent
half-initialisation. Even on my machine i can't seem to get the SPDIF led
to light up so something is wrong.
Also delay the setting of the DMA bits until after the codec detection but
before the enabling of interrupts. Note that the dma has to be explicitly
started when the device is opened.
handle IKE frag used in the first packet. That should not normally happen,
as the initiator does not know yet if the responder can handle IKE frag.
However, in some setups, the first packet is too big to get through, and
assuming the peer supports IKE frag is the only way to go.
racoon should have a setting in the remote section to do taht (something
like ike_frag force)
