Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
137,956 Commits 606 Branches 0 Tags 3.1 GiB
Commit Graph

137956 Commits

Author SHA1 Message Date
elad ced2e2a09a Remove veriexec_dprintf() calls forgotten in last commit. 2005-06-20 15:32:29 +00:00
elad 0e4dfe1792 - Use more calls to veriexec_report() where possible. 
- Change #ifdef VERIFIED_EXEC_VERBOSE to another verbose level, 2. Add
  sysctl(3) bits.

- Simplify access type conflict handling during load. This depends on
  the values of access type defines to be ordered from least to most
  'strict'.
 2005-06-20 15:06:18 +00:00
skrll 5fb9715482 Add a const 2005-06-20 14:30:29 +00:00
peter 52eb5d87eb Use .Fx for FreeBSD. 2005-06-20 14:02:30 +00:00
peter 0105f057d6 siginfo(5) -> siginfo(2). 2005-06-20 13:48:14 +00:00
peter a9b411c198 Change all .Xr config 8 to .Xr config 1, following the recent move of 
config from usr.sbin -> usr.bin.

Reviewed by wiz.
 2005-06-20 13:25:23 +00:00
briggs 11925ed1a8 Mention ataraid(4) support for Adaptec HostRAID. 2005-06-20 13:15:24 +00:00
sekiya da1b13d741 Also fix up interrupt line if interrupt is zero, as well as 255. Fixes 
interrupt issues on two of my laptops that lack PCIBIOS.
 2005-06-20 12:21:36 +00:00
kent e3c53b72af - print the controller name if possible 
- make the max values of mixers AUDIO_MAX_GAIN
- reset the stream in trigger_output()
 2005-06-20 11:48:47 +00:00
darcy 67a10100f5 Fix some printf statements to make them more portable. Doesn't completely 
fix PR kern/30456 but fixes part of it.
 2005-06-20 11:37:47 +00:00
sekiya c354a96fdc Remove unneeded dependancy on PCIBIOS. 2005-06-20 11:04:46 +00:00
sekiya d91bd456e7 pci_device_foreach(), pci_device_foreach_min(), pci_bridge_foreach(), and 
pci_bridge_hook don't actually have any dependancies on PCIBIOS-specific code,
and they can be used to fixup PCI bus numbering in the absence of the BIOS.

To that end, decouple them from PCIBIOS.
 2005-06-20 11:04:15 +00:00
peter 395b29c382 Document MAXFILES, bump date. From PR/29136. 2005-06-20 10:41:29 +00:00
salo bb837eff67 Monitor mode requires firmware version 1.0.4 or newer. Bump date. 
ok <sekiya>
 2005-06-20 09:49:27 +00:00
sekiya 93ed08ce8d Don't abort the attach if we are routing interrupts through the ioapic, there 2005-06-20 09:18:36 +00:00
sekiya 3b3daf0a90 Add "monitor" to list of valid modes. No functional change. 2005-06-20 09:06:40 +00:00
sekiya 54c9009f27 Implement monitor mode. From OpenBSD. 2005-06-20 09:03:44 +00:00
scw 3a572660d3 Use objcopy (as suggested by Richard Earnshaw) to strip ARM mapping symbols 
from the kernel image, as they interfere with ddb. But only do this if
'makeoptions DEBUG="-g"' was not specified, in case they're needed by gdb.
 2005-06-20 08:42:52 +00:00
briggs b75c4bf0e2 Add an initial man page for ataraid(4). 2005-06-20 03:08:25 +00:00
lukem 50ec57658e Allow the input [file] field separator to be a string and not just a 
single character.
Use argument-specific value names in the usage string & manual page
to simplify searching for the value's use.
 2005-06-20 02:53:38 +00:00
atatat df13e3579e Change the rest of the sysctl subsystem to use const consistently. 
The __UNCONST macro is now used only where necessary and the RW macros
are gone.  Most of the changes here are consumers of the
sysctl_createv(9) interface that now takes a pair of const pointers
which used not to be.
 2005-06-20 02:49:18 +00:00
briggs b0366b2ebd Basic support for RAID0 and RAID1 for the Adaptec HostRAID format as found 
on the Intel 6300ESB on-board RAID.  Adapted from FreeBSD.
 2005-06-20 02:11:57 +00:00
briggs 5c1f94f81d Match the 6300ESB on-board SATA/RAID controller. 
Set the ATA RAID flag, if appropriate, in the SATA chip map.
Ensure that the interrupts are enabled in the SATA chip map.
 2005-06-20 02:10:18 +00:00
thorpej 2b9a850fd3 Install eeprom.h and idprom.h 2005-06-20 02:01:30 +00:00
lukem aa159e4a50 ypdb_open(): 
* Clarify what it does (adds YPDB_SUFFIX if it's missing).
* Add some explicit pathname length checks and display a warning if exceeded.
 2005-06-20 00:29:42 +00:00
briggs 488e4cc85b Regen. 2005-06-20 00:19:38 +00:00
briggs b61e39b645 Add Intel 6300ESB SATA RAID Controller. 2005-06-20 00:18:54 +00:00
lukem cdd4868c29 tweak filename length check 2005-06-20 00:08:35 +00:00
christos 6f86542bb2 remove duplicate declaration. 2005-06-19 23:46:32 +00:00
lukem a0b1a25618 snprintf NUL terminates, so there is no need to explicitly do it afterwards 2005-06-19 23:43:51 +00:00
thorpej 6a02aeb003 Small clean-ups before an overhaul. 2005-06-19 23:36:47 +00:00
christos 60fcc7a549 move misplaced endif. 2005-06-19 23:10:03 +00:00
christos e8e0c7f52f remove duplicate declaration. 2005-06-19 23:09:50 +00:00
chs 2a8328f224 regen 2005-06-19 21:17:17 +00:00
chs b2d9223653 add some misc cards and merge the two mylex sections. 2005-06-19 21:16:41 +00:00
thorpej 86ec9c7656 Remove some unused definitions. 2005-06-19 20:31:26 +00:00
chs b36d2dee68 copy the athhal glue from Makefile.i386. 2005-06-19 20:28:14 +00:00
thorpej 7adddd1b69 Move common Sun3/Sun4 EEPROM definitions in to <dev/sun/eeprom.h> 2005-06-19 20:23:48 +00:00
chs 187b985918 add ath stuff. 2005-06-19 20:22:26 +00:00
thorpej 15adcb96b8 Move common Sun ID PROM definitions into <dev/sun/idprom.h>. 2005-06-19 20:00:28 +00:00
bouyer 19abf3be02 The ST3160023A* also need the LBA48 quirk. From Timo Schoeler. 2005-06-19 18:26:40 +00:00
elad c3caa55d4d - Avoid pollution of struct vnode. Save the fingerprint evaluation status 
in the veriexec table entry; the lookups are very cheap now. Suggested
  by Chuq.

- Handle non-regular (!VREG) files correctly).

- Remove (no longer needed) FINGERPRINT_NOENTRY.
 2005-06-19 18:22:36 +00:00
bouyer 3d0edb52b9 When the PCMCIA socket is powered up, the driver waits for the PCMCIA 
controller to be ready, but the drive attached to it may not be ready yet.
Add a half a second delay before calling wdcattach(), to let the drive
have its electronic ready to properly respond to the register tests done
in wdcprobe1(). Delay based on experiments done by John Refling with
various devices as part of the audit-trail of kern/25659; complete
the fix for kern/25659.
 2005-06-19 18:19:19 +00:00
bouyer 3110d2fd7a In wdcprobe1(), wait 5s for the drive to deassert ready. In case of e.g. 
pcmcia devices, the drive may still be doing its power-on reset.
XXX From the specs the delay could be up to 31s here, but we don't want to
    wait for 31s if we have a channel with no drives and pull-up resitors on
    the bus.
Based on patch submitted in kern/25659 by Steven M. Bellovin, part of fix for
kern/25659.
 2005-06-19 18:14:27 +00:00
wiz 76f0e20b24 Use groff macros instead of troff ones. 2005-06-19 17:34:03 +00:00
wiz 2e770dfdda Drop trailing whitespace. 2005-06-19 17:26:30 +00:00
wiz 19a870f516 Fix an article, and drop trailing whitespace. 2005-06-19 17:26:07 +00:00
wiz a2074cd992 Quote Fr so options are sorted properly. 2005-06-19 17:24:20 +00:00
kent 241f25f6e4 - add capabilities to specify a DAC group or an ADC. 
- support for 4,6,8 channels playback
 2005-06-19 16:32:55 +00:00
wiz 9a425d58bc Remove superfluous .El; a slight wording change. 2005-06-19 16:01:38 +00:00