Commit Graph

134 Commits

Author SHA1 Message Date
pk 9e16037265 Simplify the attach routine a bit. 2000-02-22 12:24:53 +00:00
pk b4e291e818 Fix some off-by-one errors; patch from Jonathan O'Brien. 2000-02-22 12:12:21 +00:00
mjacob 6f13498242 correct oops on last checkin 2000-02-19 15:13:07 +00:00
mjacob a9697ee5f2 Handle > 12 byte CDBs. 2000-02-19 01:55:42 +00:00
pk a1b5434cec Make promiscuous mode go again. 2000-02-14 17:06:45 +00:00
thorpej 94b1e4084a Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
flags down from the parent to child vi mii_attach().
2000-02-02 17:46:42 +00:00
thorpej 84dc99fdea Bring some order to the chaos which was the MII code function naming
"conventions".
2000-02-02 08:05:26 +00:00
mjacob 0e0104d0e9 There is no readily available tool to set NVRAM on isp's on sparc,
so ignore it.
2000-01-14 08:43:17 +00:00
joda 78d457dc77 (stp4020_chip_mem_map): explicitly don't handle 8-bit memory 2000-01-13 10:03:25 +00:00
pk c6b6f3883a Remove old-style boot device recognition. 2000-01-11 12:59:43 +00:00
mjacob 2a7d01e353 The trigger for not downloading f/w is now a
NULL f/w pointer, not a nonzero f/w length.
2000-01-09 18:55:11 +00:00
mjacob 250a1f41c2 The sense of being able to sleep for DMA resources was reversed. Oops. 2000-01-09 18:44:40 +00:00
pk 2afd4d3aec * remove full duplex modes for the internal transceiver
* internal transceiver needs to be reset for the BMSR_LINK bit to
  be even remotely reliable
* because of previous, maintain link state, so we won't be sensing speed
  all the time when interface flags need to be changed (e.g. entering/exiting
  promiscuous mode)
* in auto-speed mode, report link condition changes on the console
1999-12-23 16:39:56 +00:00
pk 7ab5ad7988 Streamline media code a bit by some `pseudo-mii' code designed to handle
the on-board transceiver.
1999-12-22 16:05:12 +00:00
pk f037f3be7e Shuffle some code around to allow two PHYs to attach. Only one PHY can
be used at a time, but it's now possible to select one by using ifconfig(8)'s
`instance' parameter.
1999-12-21 21:07:42 +00:00
pk bbbbfe896e * Remove spurious blockade in the path to get the transceiver status word.
* Make sure to flip the 10baseT/100baseTX bit when doing autoselect.
* Miscellaneous cosmetics.
1999-12-20 22:23:39 +00:00
pk d135edf1a7 #define the bit positions of the MIF I/O lines. 1999-12-20 22:19:11 +00:00
mjacob 5babd2b8c9 get back to looking at config flags 1999-12-20 00:49:58 +00:00
mjacob e6da5abb16 Add back in inclusion of microcode and rationalize it. request/response
queue indices need to be u_int16_t wide.
1999-12-04 02:56:30 +00:00
pk d5a471ccc9 Check presence of Sbus interrupt properties before using them.
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
thorpej 4bdf6bd731 Call mii_down() as appropriate. 1999-11-12 18:14:17 +00:00
pk 23c39b410d Fix some diagnostic output with a patch from Jonathan O'Brien. 1999-11-05 19:00:44 +00:00
mrg bd0928e723 find "SUNW,hme" as well as "hme". this matches the onboard
ultra2 hme.  haven't actually tested this beyond it probing
because my scsibus is hanging.  anyway, it reports:

hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
thorpej ca9b9a3b2e Adapt to mii_phy_probe() change. 1999-11-04 00:24:00 +00:00
mjacob 44c603dd7b Remove reference to loadable f/w. 1999-10-28 16:11:19 +00:00
mjacob 6bbb170768 We alloc xflist and dma maps in mailbox setup. We swizzle endian stuff
at the end of dma setup.
1999-10-14 02:16:04 +00:00
thorpej 63b8530b4e Update for SCSPI changes. 1999-09-30 23:04:39 +00:00
thorpej 7b3258b6a7 Make the kthread API a bit more friendly to loadable kernel modules. 1999-07-06 21:44:09 +00:00
pk a7e4d3ac4d Add the Sbus front-end for the HME driver. 1999-06-27 12:47:52 +00:00
pk 4f2e48c4d2 Don't turn on the engine too early.
Add and use QEDEBUG.
1999-06-24 19:59:14 +00:00
pk 9335333dee Issue a reset command when initializing. 1999-06-24 19:56:51 +00:00
mrg 67cbdf5623 split sbus audiocs code up so we can share it with the ebus. XXX ebus DMA is probably different. 1999-06-05 14:29:10 +00:00
pk 61e5d73035 Fix bus_size_t/size_t/int confusion. 1999-05-27 14:22:28 +00:00
thorpej f98d358a1f Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m).  The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary.  Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
mrg f5af676456 white space. 1999-05-16 14:47:52 +00:00
pk 569836a986 It is no longer necessary to protect bus_dma_[un]load() at splbio, since
sparc bus_dma*() functions now protect their own internals..
1999-04-25 10:40:53 +00:00
pk 52db3a158e Correct QESTAT `%b' format string. 1999-04-20 20:24:39 +00:00
pk 401d03761f Initialize automatics in stp4020print(); noticed by Jonathan O'Brien. 1999-03-29 21:30:48 +00:00
cjs 5ecfcfbb96 Make `sun4m DMA not supported yet' message print only for this device,
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
mjacob d8aa229a12 roll internal release tag 1999-03-26 22:45:17 +00:00
mjacob 3cafeadabd Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
pk 54ae4d24b8 Call bus_dma_[un]load() at splbio. 1999-03-23 00:38:15 +00:00
pk d86e93c62a Fix promiscuous modes - patches from Jason Wright. 1999-03-23 00:27:09 +00:00
eeh b71ea6aad4 Use correctly bus_space_*() macros to access device registers. 1999-03-19 02:32:48 +00:00
mjacob c312dfb410 prototype 1080/1240 support caused register offset rewhack 1999-03-17 06:17:16 +00:00
mrg fbda6bed6d make this compile on SUN4U. XXX icky, reader beware. 1999-03-09 00:42:20 +00:00
pk 87ae97e3f0 Fix what is probably a past-o. 1999-02-28 17:01:49 +00:00
pk 5c062abb64 Fix the bus print function. 1999-02-27 22:21:13 +00:00
pk 331694119a Our device name differs from the PROMs node name. 1999-02-27 13:17:08 +00:00
pk c6c74098d0 Don't try to use the MII routines for the internal PHY. 1999-02-19 14:57:00 +00:00