Bring in a few changes from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de).
Assume that PRAM time - GMT bias (set in the booter) is the current time
in UTC.
- v2 openprom disk boot generates "/sbus/esp/sd@3,0" which we translated
into "/sbus@0,0/esp@0,0/sd@3,0"... this caused esp.c to reject
the bootpath because it was looking for sbus slot/offset 0,0.
changed the code to generate "/sbus0/esp0/sd@3,0" to fix this
panic.
- when generating fake boot paths, generate them with unit numbers
rather than slot/offsets (thus, /obio@0,0 becomes /obio0, as
does vmel and vmes).
- fixed up comments to reflect these changes
tested new code on: 4/280 (diskless), 4/360 (diskless), 4/360 ("xd" disk),
4/370 (scsi disk), ss1 w/v1 openprom (diskless),
ss1 w/v1 openprom (scsi disk), ss2 w/v2 openprom (diskless),
ss2 w/v2 openprom (scsi disk).
"struct pmax_fbtty". Remove most of its fields, since the fields
in the struct fbinfo render most of them unecessary, and the pmax
now uses rcons anyway. Moe the lk-201 keycode definitions to lk201.h,
so rcons can use them too.
to "kn01_<func>", to avoid confounding a model name (PMAX) with the name of the
entire port (pmax).
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
Pass softc pointers to the scsi and ethernet kn01 (DS_PMAX) drivers,
rather than having unit numbers wired into the base-level interrupt
handler.
to "kn01_<func>", to avoid confounding a model name (PMAX) with the name of the
entire port (pmax).
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
Move consinit() from here to cpu_cons.c.
Eliminate the old old pmax-specific console driver, whcih didn't
know about vnodes. Use sys/dev/cons.c instead.
Delete the old 4.4BSD/pmax TURBOChannel probe routines and ROM-to-driver
name-mapping functions.
"struct pmax_device" to avoid conflict with <sys/device.h>.
Move the glue routines for config.old pmax SCSI device probing from
autoconf.c to conf-glue.c.
old-style pmax polled input for cn_getc(). Needed because the
input side of rcons is not initialized in time for GENERIC kernels
to use it to read a root/swap devicename from /dev/console.
Fix an argument glitch between consinit() and pminit().
Change consinit() to use PROM output for remote consoles, because
the serial drivers aren't yet initializable when consinit() is called.
old-style pmax polled input for cn_getc(). Needed because the
input side of rcons is not initialized in time for GENERIC kernels
to use it to read a root/swap devicename from /dev/console.
a) check against `my' ethernet or broadcast addresses done in
ether.c
b) changed interface to readether() to provide ethertype info
c) respond to arp requests when appropriate.
First two are clean-up. Last fixes hp300 and presumably mvme68k netboot
code.
"struct pmax_device" to avoid conflict with <sys/device.h>.
Change the signature of interrupt-handlers to take a void *
(a pointer to the softc) and return an int (indicating spurious
interrupts or other conditions.)
NetBSD/sparc rcons glass-tty console pseudo-device driver, via
the "fb" generic-framebuffer pseudo-device driver.
Individual framebuffer device drivers are now autoconfig glue,
and initialization code for a set of vdac/ramdac-level methods,
called "fbdriver", that's used by all the pmax device drivers.
All the handlers for user-level requests (open/ioctl/read/write/close)
are moved into the fb pseudo-device driver, which uses the
the "fbdriver" methods to work on any given pmax hardware driver.
Framebuffers supported are: sfb cfb mfb xcfb pm.
Move the qvss (pm) -style mmap()ed device interface, kernel tracking
of mouse button/movement events, and placing mouse/keyboard
events in an mmap()ed ring buffer, out of the framebuffer device
drivers and into separate source files. The fb pseudo-device driver
uses the qvss-compatible interface, since that's what the (R5) X
server uses.
pk