7b3dd7f5c3
Define the REZERO UNIT command.
1997-10-03 01:56:52 +00:00
5757f59312
Define the "write parameters" mode page.
1997-10-03 01:55:20 +00:00
284a78edc2
kern/3022: make sure that printing sense info in SCSIDEBUG case starts at
...
the right place and contains the right number of bytes.
1997-10-02 16:03:42 +00:00
78e5dc866c
Silly boy.... don't print out sense info if the command was marked SCSI_SILENT,
...
and print the opcode with a leading 0x if you're printing in hex.
1997-10-01 18:47:01 +00:00
e9cc9ec6cc
Many thanks to Wolfgang Rupprecht for spotting this... In order to be sure
...
about actual position when reading tape position, you should flush any
pending writes. Well, if the tape is write protected, some drives don't
see the zero count WRITE FILE MARK command as a no-op and complain. Dumb!
1997-10-01 18:45:02 +00:00
c557d7e759
Add missing SCSI_DATA_IN when issuing a READ_ELEMENT_STATUS command.
...
Noticed by Dave Huang <khym@bga.com>.
1997-10-01 05:39:56 +00:00
d7d845c3d2
Cosmetic changes to keep coding style consistency in this directory;
...
- Indent with tab of width 8.
- Use four column to indent continuation line.
- Fold long line if possible.
- Use return (xx) instead of return xx.
- Compare pointer against NULL instead of testing like boolean.
- Delete whitespace at the end of line.
- Delete whitespace in front of function call operator.
- Delete whitespace after cast.
- Dereference a pointer to function explicitly.
- Add an empty line after local variable declaration.
- Use NULL instead of (char *)0.
- Dont use block for single statement.
1997-10-01 01:18:38 +00:00
9e217027ee
Add in mtop operation MTCMPRESS, which can enable or disable tape compression.
...
The method for doing this is to try and use the DATA COMPRESSION mode page
first, followed by the DEVICE CONFIGURATION page (this is because most newer
tape devices are now using DATA COMPRESSION instead of DEVICE CONFIGURATION
pages).
Add in the logical && hardware read position and set position ioctls. Oddly
enough, because NetBSD is limited in having the driver track file && record
numbers, the usual agony over what to do once you use logical or hardware
block positioning can be avoided. Amusing.
Make a minor change so that for SCSIVERBOSE cases that SCSI_SILENT in
the xs' flags is still observed.
1997-09-29 19:33:03 +00:00
d3349ea385
Add SCSI-3 DATA COMPRESSION page structure.
...
Add READ POSITION command structure. Add READ_POSITION and LOCATE opcodes.
1997-09-29 19:29:02 +00:00
9f482818bc
Add 'initialize element status' command; note (for future fixing in ch.c)
...
that a number of jukeboxes can't cope with DBD (disable block descriptors)-
we'll have to fix that some day.
1997-09-29 17:32:23 +00:00
7d8a3528cb
Add quirks entries for Hitachi DK515C disk drives and Cipher ST150S tape drive.
...
Closes PR kern/4171 from jbernard@tater.mines.edu .
1997-09-29 11:00:36 +00:00
9b8a83f50f
Fix a misspelling.
1997-09-29 00:55:26 +00:00
2896e07556
Allow SDOUTSTANDING to be defined elsewhere (e.g., config file).
1997-09-20 18:56:30 +00:00
e8733ec0da
mark scsipi_make_xs() as potentially unused, so that this can be
...
compiled with -Wunused without optimization/inlining enabled.
Also, make it a little bit closer to KNF.
1997-09-19 23:53:33 +00:00
4be590238f
Another couple NOMODESENSE drives.
1997-09-19 14:08:48 +00:00
a0c4d0c2e6
Add new ioctl OSCIOCREPROBE and OSCIOCIDENTIFY to support binary
...
compatibility with NetBSD 1.2.
1997-09-19 00:59:49 +00:00
4d15bd0b78
Declare SCSIVERBOSE by defopt in files.scsipi. Include opt_scsiverbose.h
...
in scsi_base.c and st.c.
1997-09-13 08:51:15 +00:00
ca07d14b0f
Add SDEV_NOLUNS to another CD-ROM player.
1997-09-09 21:56:01 +00:00
8178ae5997
Uses PLAY_MSF instead of PLAY for the CDIOCPLAYTRACKS ioctl. This avoid a int16
...
overflow in the PLAY cbd when the resquested track(s) are more than 65535
blocks long. Submitted by t-nkyma@tcp-ip.or.jp in PR kern/4092.
1997-09-09 09:07:43 +00:00
a5aece0adc
Don't attach worm devices to the CD driver. This is a private hack, and should
...
never have been there !
1997-09-05 16:45:25 +00:00
5d5b3c641f
Restore indentation of SCSIVERBOSE output.
1997-09-05 08:36:40 +00:00
87219fa0e6
Added a quirk entry for the SANYO CRD-254P (from OpenBSD), and
...
one for the MATSHITA CR-574 (from Josef Wulf <wulf@ping.net.au> via OpenBSD).
1997-08-28 14:02:31 +00:00
6f3bab1f59
Merge scsipi branch in the mainline. This add support for ATAPI devices
...
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
e349ac7eb5
If SCSIVERBOSE is enabled, call the routine to print out detailed sense
...
information.
1997-08-20 18:20:12 +00:00
e919735e35
Add in (enabled by SCSIVERBOSE option since it adds a fair amount of string
...
gup to the kernel) more detailed SCSI error printing, based off of final
SCSI-2 specification. This will also print out things like progress indicator
errors, and will also dump out additional sense bytes that haven't been decoded.
Also, turned the error message 'DELAYED' to 'DEFERRED' since that's more
accurate.
1997-08-20 18:19:12 +00:00
77116c198a
Add in prototype for routine to print SCSI errors in detail.
1997-08-20 18:11:37 +00:00
4aa2f7013c
A few more SDEV_NOLUNS entries- one tape drive (SONY Beta/VHS) and a couple
...
of PCMCIA card readers (one as T_DIRECT, the other as T_PROCESSOR).
1997-08-17 16:25:11 +00:00
ee328c6f18
This fibre channel disk doesn't support the geometry page.
1997-08-16 01:05:51 +00:00
f1947d6a44
add SDEV_NOLUNS for my scanner (UMAX S-6E)
1997-08-14 22:17:32 +00:00
be20028837
trivial change for PR#3815
1997-08-04 07:16:49 +00:00
cc7e70b188
%x -> 0x%x
1997-08-04 06:55:22 +00:00
e3680b0e26
config.new => config
1997-07-20 20:33:08 +00:00
797652981e
More CD quirks, from Dave Huang (pr-3843)
1997-07-17 00:46:50 +00:00
6ac982f2a0
mark prototypes for static inline functions as possibly unused (with
...
__attribute__ ((unused))), to avoid generating warnings when compiling
without optimization but with most ports' default warning flags.
1997-07-07 22:45:34 +00:00
a8597d8143
Report actual disksize on finding a disk.
...
(From: der Mouse <mouse@Rodents.Montreal.QC.CA>)
1997-07-02 03:51:25 +00:00
84166e5151
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:28:36 +00:00
8303adf18a
sdsize(): only call sdopen()/sdclose() if not already open, per the
...
current openmask.
1997-06-18 20:38:59 +00:00
8033e010bd
In case of a SCSI-error print the extended sense information and not
...
some sort of random garbage.
1997-06-09 19:36:56 +00:00
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
81a10d7725
Don't require that a device is open for writing to perform a raw
...
SCSI command that just reads.
1997-04-26 22:24:46 +00:00
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
b65e62c6c4
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
Do not force the initial part of a packet into a separate mbuf.
1997-04-24 02:36:46 +00:00
db2332eb26
Another silly CD-ROM drive...
1997-04-24 00:49:14 +00:00
6102bc8ec2
And Yet Another Broken IBM disk (the 664 this time), once again
...
reported by Hubert Feyrer <feyrer@grizu.fh-regensburg.de>.
1997-04-20 01:30:30 +00:00
f9bc642a6d
Add Yet Another Broken IBM disk to the SDEV_AUTOSAVE list. This one
...
doesn't report a vendor string (yuck)!. Problem reported by
Hubert Feyrer <feyrer@grizu.fh-regensburg.de>.
1997-04-20 00:55:05 +00:00
f2c53e4c3d
Two more quirks:
...
Python 28454-XXX tape drive: NOLUNS
1588-15MBSUN0669 disk: AUTOSAVE
1997-04-19 21:32:37 +00:00
63d11b7577
Add another IBM disk that needs SDEV_AUTOSAVE.
1997-04-08 17:35:06 +00:00
470e2a9983
* Do some KNFing.
...
* Make all local functions static.
* Add some untested netatalk support.
1997-04-04 19:02:43 +00:00
6d3685ab6c
Add a SDEV_AUTOSAVE quirk for the Emulex SCSI<->ESDI bridge.
1997-04-02 02:36:02 +00:00
aca1dae3c4
Push the buffer cleanup code into scsi_done(), and split it so that biodone()
...
is called *after* the driver `done' routine. This fixes disk I/O statistics
on SCSI devices.
Also, calling the `done' routine with a `complete' argument of 0 and actually
having it do anything meaningful loses in at least 3 ways, so just nuke the
argument altogether and don't call it this way. If the driver needs to do
some error handling, that's what `err_handler' is for.
1997-04-02 02:29:30 +00:00
thorpej