5ad4518358
Lower debug level so the match routine isn't so verbose.
2003-01-20 21:14:57 +00:00
d7b879c6ec
Grrr. So much for my ability to use grep(1) effectively. Pointed out
...
by Stephen Degler in private mail.
2003-01-20 07:12:12 +00:00
276fd1665c
The Double-Semi-Colon Police.
2003-01-20 05:29:53 +00:00
2d7b577657
When padding to URL_MIN_FRAME_LEN, memset the extra buffer space used.
2003-01-15 22:40:34 +00:00
16d56c01d2
Regen.
2003-01-15 13:36:23 +00:00
61f5ebcc50
Add Epson Perfection 2400. From kern/19856, Rob Quinn.
2003-01-15 13:35:55 +00:00
a7bc8e6057
Add support for Epson Perfection 1260.
2003-01-13 21:51:30 +00:00
ced7282b45
Regen from "usbdevs".
2003-01-13 17:26:33 +00:00
341e2f7441
Add Epson Perfection 1260 scanner.
2003-01-13 17:25:20 +00:00
e648b82855
Changed the interface for passing output data between the bthci driver
...
and the back end Bluetooth device driver. The device driver now
allocates a suitable buffer on behalf of the bthci driver, and bthci
fills the buffer before despatch.
This saves an ugly temporary allocation (in bthci) and memory copy (in
the USB driver) per write, and also works better with the
sockets-based interface I'm experimenting with.
2003-01-11 06:12:09 +00:00
a9dbc85017
Try to get full device descriptor a few times. This makes some slow
...
devices work. From FreeBSD.
2003-01-10 11:19:13 +00:00
89b8fd8b00
Regen.
2003-01-10 11:13:51 +00:00
7d481b8bc1
Add Epson 1660. From kerm/19767, Neil Short.
2003-01-10 11:06:58 +00:00
cd3665ed2a
Add Epson 1660. From kern/19767.
2003-01-10 11:06:13 +00:00
aab035b2c2
Add quirk for NeoDio ND3050.
2003-01-10 00:52:13 +00:00
cea6e962cb
Regen.
2003-01-10 00:50:55 +00:00
c77255a12b
Add NeoDio A 6-in-1 Flash Device Controller with USB Interface.
2003-01-10 00:50:00 +00:00
3258109e78
regen
2003-01-07 12:20:10 +00:00
0a49647d6b
add Cambridge Silicon Radio and their Bluetooth USB Adapter.
2003-01-07 12:19:16 +00:00
45ad5c9584
successful with only one l.
2003-01-06 12:46:05 +00:00
584c708e83
When detaching a ulpt device, call vdevgone() for the corresponding
...
NOPRIME minor device too.
2003-01-05 10:19:42 +00:00
97f7cada0b
Make the ubt driver functional. This is an experimental, incomplete, but
...
actually functional driver. It provides a local HCI interface to the
HCI-over-USB interface on standards-compliant Bluetooth USB devices.
Currently this device can be attached to the bthci driver for direct user-land
access to the device.
2003-01-05 05:20:20 +00:00
6957647e8b
Move #define UBT_DEBUG from ubt.c to usb_port.h
2003-01-05 03:48:18 +00:00
388a82e194
Knock off some XXX'd code: Use malloc() instead of a fixed length buffer
...
on the stack.
2003-01-02 11:00:21 +00:00
3e383d4995
Regen from "usbdevs".
2003-01-02 09:20:39 +00:00
e2ecbdf4c0
Copy USB product id for HP DeskJet 1220C from FreeBSD-current to fix
...
build problems in "usb_quirks.c".
2003-01-02 09:20:21 +00:00
906987bba8
Merge changes from FreeBSD:
...
o HP 1220C
o Sanyo SCP-4900 (needs UQ_ASSUME_CM_OVER_DATA to work with umodem)
2003-01-02 04:19:00 +00:00
ca15bf77d6
Sync to usbdevs 1.286
2003-01-02 04:04:23 +00:00
abf9e63902
Add Sanyo SCP-4900 3G phone.
2003-01-02 04:01:46 +00:00
439063014c
Initialise uhubdebug so that it's patchable in a kernel image
2003-01-02 03:20:09 +00:00
25ffe0e71a
Regen.
2003-01-01 16:36:51 +00:00
16de3525ca
Add Vivitar camera. From OpenBSD.
2003-01-01 16:36:20 +00:00
0ac88e0baf
Don't try to use 1284 mode.
2003-01-01 16:32:58 +00:00
f2590fdb81
Reissue the MAXP command on resume. From FreeBSD.
2003-01-01 16:25:59 +00:00
8789d465b2
Try getting string descriptors in a slightly different way to works around
...
some problematic devices. From Alexander Kabaev <kan@FreeBSD.ORG>.
2003-01-01 16:21:50 +00:00
086cbf5710
Assign NULL to sc_pipe after closing, so that usbd_close_pipe isn't
...
called twice. At least in NetBSD, the detach function is called when the
device is removed, even if the attach function has failed.
This is probably the cause of panics reported in kern/19326.
2003-01-01 15:55:48 +00:00
72a7af27b0
Use aprint_normal() in cfprint routines.
2003-01-01 00:10:15 +00:00
3204b83aa5
Be somewhat more persuasive about enabling the port on a port reset.
...
USB protocol dictates that the port enable must be implied by the port
reset. To implement this on (at least) the VIA VT83C572 this means we
need to wait around tweaking the chip state until the port actually
transitions to enabled (or the device goes away). Likely fixes
kern/11018.
2002-12-31 02:21:31 +00:00
0bdb52527a
CONSTCOND away some lint warnings
2002-12-31 02:04:49 +00:00
914250b8f3
Another quirk.
2002-12-31 00:50:07 +00:00
13d6b87d32
Use a somewhat bigger buffer for the vendor string.
2002-12-31 00:39:11 +00:00
3d3cc353c3
extern references to debugging globals that really exist elsewhere
2002-12-30 02:44:32 +00:00
47fa5a292f
An earlier revision of the data sheet documented MIR data rate support,
...
576000bps and 1152000bps. In the current published version of the data
sheet the MIR support documentation is gone, and the MIR mode bit is
documented as reserved. Possibly the device has a design flaw affecting
the MIR data rates? Document here that this information came from an
earlier data sheet, but leave MIR support in for the moment.
2002-12-28 06:04:18 +00:00
912898cad7
Update reference to online data sheets
2002-12-28 05:35:34 +00:00
4bfd7daa84
This device has a single FIFO shared by both incoming and outgoing data.
...
If a series of outputs are delivered to the device before the kernel thread
has polled for input data, any input data will be lost. As a
counter measure, always force an input check between outputs.
2002-12-28 04:55:30 +00:00
562d1e4603
Delinting - as the data passed to ustir_dumpdata() is always u_int8_t,
...
use that type in the prototype too.
2002-12-28 04:28:39 +00:00
df379868e8
Delinting - don't treat ennumerated types as booleans
2002-12-28 04:23:40 +00:00
6e4d13a881
Delinting - sprinkle some ARGSUSED
2002-12-28 04:16:33 +00:00
095017c9ef
Add quirk. From kern/19499, Werner Backes.
2002-12-23 12:42:53 +00:00
09b10d25e0
Regen.
2002-12-23 12:40:03 +00:00
augustss