that made the wd-driver fall over on kernels compiled with the latest
assembler. The macro;s now use the single_inst_*() functions so there
are less places to go wrong here next time...
assigned by RISCOS Ltd (and were assigned by Acorn) to be unique across all
manufacturers. This means that associating each one with a manufacturer (and
checking the manufacturer when attaching) is bogus. Thus, we don't do that
any more.
This should have the pleasant side-effect of getting APDL IDE interfaces
working, since they're just ICS ones with a different manufacturer ID.
into kernel_object where this was missing.
(important here because VM_MIN_KERNEL_ADDRESS != 0)
-add some diagnostics
-eliminate some differences to other Utah derived pmaps
into kernel_object where this was missing.
This is a no-op on ports where VM_MIN_KERNEL_ADDRESS==0, ie all but
cesfic.
Confirmed and corrected by Chuck Silvers.
intvid didn't find the frame buffer on his PB 170 in NetBSD 1.5. This is
because the PowerBook 140/145+145B/170 entries in intvid_info[] were
entered into the table directly from the corresponding hardware tech
notes. Unfortunately, the actual frame buffer is mapped at an offset
of 32 KB from the base of the region (at least when in 32-bit mode).
Since all 4 of these systems have identical video configurations, I'm
updating the rest to match.
on spldma), and rest of driver/network code (which runs on splnet) in way
if->if_snd queue is accessed. Solve by using intermediate queue.
Problem found, and fix provided by Christian Limpach in port-next68k/16798
boot loader image. Installboot can modify the default command in the
first-stage bootblocks, which will have no effect. Copy the default command
from the first-stage bootblock into the second-stage bootloader so modifying
the commandline with installboot actually works again.
which are IIcx and IIx machines with not much RAM, respectively.
The PUMA config is configured somewhat optimally for one of Allen's
Quadras but doesn't do anything special as compared to SMALLRAM.
to use a pc-relative jump. Which is definitely not what is needed in the
relocation code!
This is new in the current assembler apparantly. None of the kernels build
after my latest upgrade were able to boot... What else is lurking!
- setup a 32KB (+32byte) stack, instead of 4KB stack
- cache flush: use _start instead of 0x4000, and flush 2k instead of 1k
Features (by me):
- implement:
OF_write() (and grab "stdout" from "/chosen")
putstrn(s,n) using OF_write(); write string s of n bytes long
putstr(s); write fixed-sized string s
putc(c); write char c
- add some useful messages which output the status of loading the
stage 2 bootstrap (which is usually ofwboot)
This code now works on Bill's Beige G3!
NULL for root PCI busses. For busses behind a bridge, it points to
a persistent copy of the bridge's pcitag_t. This can be very useful
for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
uses OFW device nodes to enumerate the bus. When a PCI bus that is
behind a bridge is attached, pci_attach_hook() allocates a new PCI
chipset tag for the new bus and sets it's "curnode" to the OFW node
of the bridge. This is used as a starting point when enumerating
that bus. Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.
some MI PCI code that uses it, and soon there will be more. (The rationale
for not making it available previously was that it could be mis-used, but
that's true of a lot of things.)
- unify sparc_bbinfo (1064 bytes, with 256 block entries)
and sun68k_bbinfo (296 byte, with 64 block entries)
into shared_bbinfo (512 bytes, with 118 block entries),
which will be also shared by future bbinfo-using platforms
(including macppc)
- add datestamp to *_BBINFO_MAGIC strings, to prevent installboot vs
bootxx version skew.
- add macppc support
*/bootxx.c:
- migrate to new shared_bbinfo structure
installboot:
- add macppc support (still needs applepartmap support and testing)
- improve and add some more warnings & errors to installboot
- implement shared_bbinfo_clearboot() and shared_bbinfo_setboot(), which
perform the majority of the work for bbinfo-using back-ends
(rather than replicating that across multiple back-ends).
Also add correct locking when freeing pages in pmap_destroy (fix from potr)
This now means that arm32 kernels can be built with LOCKDEBUG enabled. (only tested on cats though)
