Commit Graph

26001 Commits

Author SHA1 Message Date
tsubai
7756c05cc4 Split ADB driver to aed (ADB event device), akbd (ADB keyboard),
and ams (ADB mouse).  adb is a bus now.  (from Colin Wood)
1998-10-13 11:21:20 +00:00
bouyer
ff0134b99f Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
bouyer
da5d0a6f17 pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
msaitoh
39c8c94fa5 make it compile with GWETHER again. 1998-10-13 08:33:05 +00:00
thorpej
dc7cfafe4c Default to "no debugging messages" (still patchable). 1998-10-13 05:39:01 +00:00
enami
470c2f6696 Remove space at the end of line. 1998-10-13 03:57:27 +00:00
kim
e34aa44c14 Put back ETHERTALK_AT (but I did convert *all* code to ETHERTYPE_ATALK),
so if vendors (or something) used it, it is still found.  Also added short
comments for each alias to explain why they are there.
1998-10-13 02:55:18 +00:00
kim
cd7e3136ad Use ETHERTYPE_ATALK instead of ETHERTYPE_AT. The former seems more common.
Our other constants also use "ATALK".

Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
1998-10-13 02:34:31 +00:00
enami
13b8051475 Make this file compile again with -DATAPI_DEBUG_PROBE. 1998-10-13 02:09:47 +00:00
pk
8511a94f26 Oops, USPACE does not in 13 bits.. repair and save one instruction
in a non-SMP kernel.
1998-10-12 22:05:17 +00:00
is
4e322893fa Make the data pointer of the write_multi, write_region and write_stream
methods const *.
1998-10-12 22:02:43 +00:00
pk
c27a8760b7 In switchexit(), switch to the current CPU's idle u.area. 1998-10-12 21:51:54 +00:00
pk
dff4866141 Add offset of `cpuinfo.idle_u'. 1998-10-12 21:50:22 +00:00
pk
5d124ce774 Move around a few PTE-manipulating macros. 1998-10-12 21:17:28 +00:00
is
842fbdf4d2 - add bus_space_{copy,set}_region_{1,2} support and implementation for
_1 and for _2 in the contiguous and interleaved case.

- while we're here, reorganize bus.h into sections, and use the defined
  convenience functions everywhere.
1998-10-12 21:15:54 +00:00
pk
83b671e23d Make `cpcb' (current u.area) a per-CPU variable.
Brace some MP-only code with `#ifdef MULTIPROCESSOR'.
1998-10-12 20:56:48 +00:00
bouyer
46aa11acac Adjust include list. 1998-10-12 19:50:09 +00:00
perry
d6748769a5 Cut down slightly by reducing md size and commenting out ext2fs
support.
(From Havard.Eidnes@runit.sintef.no)
1998-10-12 16:37:44 +00:00
perry
6b858b9573 kernels for 4Mbyte main memory machines (from Havard.Eidnes@runit.sintef.no) 1998-10-12 16:36:18 +00:00
bouyer
aaa8f8b183 Patch from Mark Brinicombe for arm32 config with the new ide system. 1998-10-12 16:13:03 +00:00
bouyer
19fddaeeb5 Merge bouyer-ide 1998-10-12 16:09:10 +00:00
perry
37cb095897 1) Change "dectohexdec" and "hexdectodec" to "bintobcd" and
"bcdtobin". The old names were bogus.
2) Make the code grok the NVRAM's century field. This code is, to say
the least, poorly tested. It should make NetBSD play nicer with other
OSes that care about the century field, however.
1998-10-12 15:41:11 +00:00
pk
6791d7f713 Make `_cpcb' (pointer to current user area) a per-CPU variable.
This cpuinfo field is initialized here in locore before calling bootstrap(),
since it must be valid before entering the window overflow/underflow handlers.

Fix miscalculation in the MULTIPROCESSOR version of INTR_SETUP().
1998-10-12 14:39:10 +00:00
pk
523892012a `cpcb' (pointer to current u.area) is now a per-CPU variable. 1998-10-12 14:32:14 +00:00
pk
fbbc2eeedd `cpuinfo' is now cleared in locore. 1998-10-12 14:15:13 +00:00
pk
6fc7a5b45a Define `sizeof(struct cpu_info)'. 1998-10-12 14:03:22 +00:00
pk
1fb4827a72 Take care of a MID not present when matching timer register sets. 1998-10-12 12:28:26 +00:00
bouyer
91ce6daac5 Fix for files > 2Gb, one from Kirk McKusick via OpenBSD and one similar from me. 1998-10-12 09:57:48 +00:00
veego
a5eda011ab Include <sys/device.h> for the configure prototype. 1998-10-12 03:51:59 +00:00
mark
c70acc4a87 Add console initialisation for wscons via VGA.
Use the boot options console=xxx to select the console where xxx is
vga, fcom or com.
1998-10-12 03:32:51 +00:00
mark
91a04b5d0c Define __HAVE_NWSCONS 1998-10-12 03:12:37 +00:00
chuck
8bef431273 remove unused share map code from UVM:
- update calls to uvm_unmap_remove/uvm_unmap (mainonly boolean arg
        has been removed)
1998-10-11 23:20:59 +00:00
chuck
025ae6bd64 remove unused share map code from UVM:
- update calls to uvm_unmap_remove/uvm_unmap (mainonly boolean arg
	has been removed)
 - replace UVM_ET_ISMAP checks with UVM_ET_ISSUBMAP checks
1998-10-11 23:18:20 +00:00
chuck
03939069dc remove unused share map code from UVM:
- update uvm_faultinfo's rvaddr to orig_rvaddr to match changes from
	uvm_fault.h
1998-10-11 23:16:20 +00:00
chuck
2d4c15ebc9 remove unused share map code from UVM:
- replace map checks with submap checks
 - get rid of unused 'mainonly' arg in uvm_unmap/uvm_unmap_remove, simplify
	code.   update all calls to reflect this.
 - don't worry about unmapping or changing the protection of shared share
	map mappings (is_main_map no longer used).
 - remove unused uvm_map_sharemapcopy() function from fork code.
1998-10-11 23:14:47 +00:00
chuck
1b59a238c4 remove unused share map code from UVM:
- simplify uvm_faultinfo in uvm_fault.h (parent map tracking no longer needed)
 - adjust locking and lookup functions in uvm_fault_i.h to reflect the above
 - replace ufi.rvaddr with ufi.orig_rvaddr in uvm_fault.c since rvaddr is
	no longer needed.
 - no need to worry about share map translations in uvm_fault().  simplify.
1998-10-11 23:07:42 +00:00
chuck
8ffef382dd remove unused share map code from UVM:
- udv_fault() no longer has to worry about share map address translations
	on device faults.  simplify code.
1998-10-11 23:02:31 +00:00
chuck
a4d3b16d22 remove unused share map code from UVM:
dump UVM_ET_MAP/UVM_ET_ISMAP.   if you need to detect a submap use
  UVM_ET_SUBMAP/UVM_ET_ISSUBMAP.
1998-10-11 22:59:53 +00:00
chuck
1449d78fd3 remove the following if UVM is defined:
- share_map in vm_map_object.   UVM doesn't use share maps, so drop unused
	partial support for them to simplify the code.
 - is_main_map in vm_map.   no longer needed once share maps are gone.
 - vm_map_version_t.   map versions are handled elsewhere in UVM.
1998-10-11 22:56:42 +00:00
thorpej
2101c736a3 Make the product lookup table-driven. 1998-10-11 18:42:01 +00:00
augustss
44d4d6a60a Call correct ad1848 attach routine. Fixes PR 6269. 1998-10-11 17:02:36 +00:00
pk
b9d844a520 Allocate a private PCB, kernel stack and interrupt stack for each processor.
As a result, the stack setup code in locore.s changes slightly in
the MULTIPROCESSOR case. Also, make the stack redzone barrier (for
debugging only) a per-CPU entity.
1998-10-11 14:46:45 +00:00
thorpej
e0fa7545bf Use pcmcia_io_free() where appropriate. 1998-10-10 22:01:24 +00:00
thorpej
09b6735d35 Define missing pcmcia_io_free(). 1998-10-10 21:59:40 +00:00
thorpej
be326c54fe Add pcmcom driver and com slaves. 1998-10-10 21:58:22 +00:00
thorpej
f1c971ea72 Device driver for PCMCIA multi-port serial cards. Currently supports
the Socket Communications, Inc. dual-rs232 device.
1998-10-10 21:27:21 +00:00
scw
260d2c97a9 Make 'configure()' agree with the prototype in <sys/device.h>.
(Returns 'void').
1998-10-10 19:46:29 +00:00
scw
bdf8d911fc Clear 'cold' to zero at the end of configure(), where it belongs.
(This used to be done in machdep.c, but thorpej recently zapped
that one ;-)
1998-10-10 19:15:32 +00:00
drochner
ff455e77b6 Match pchb by class/subclass, like pcib.
Add a note about this strange Pequr host bridge in Compaq machines.
1998-10-10 14:12:21 +00:00
hannken
f568c6347c Fix last commit -- NISADMA is either 0 or 1. 1998-10-10 13:43:10 +00:00