Commit Graph

1970 Commits

Author SHA1 Message Date
thorpej
7ca3fb9ef0 Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
scottr
2c7ec6839c In ems_init(): make sure there's valid data in the buffer after sending
a TALK command to a device.  Noticed by Ken'ichi Ishizaka.
2000-10-01 05:10:57 +00:00
scottr
489ed1a908 The Duo ADB controller doesn't notify us that it needs to be polled
through the (emulated) VIA.  Work around this problem by polling the
Power Manager chip directly.  From Daishi Kato, PR 9852.
2000-09-27 03:57:51 +00:00
scottr
29923311f1 Set up ADB hardware type before making decisions based on same.
This is part of PR 9852 from Daishi Kato.
2000-09-27 03:27:23 +00:00
scottr
7c2fc39588 Now that we do collision detection and assign all ADB devices to distinct
addresses, it makes sense to print the actual address of the device rather
than the original address.  The latter is useful to distinguish the type
of device only, so we maintain that data internally (as we always have).

This closes PR 10557 from Dave Huang.
2000-09-27 03:22:05 +00:00
abs
3ef92f0bdb Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
abs
ccf1c822a6 Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
jdolecek
b1f94e26ab don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
scottr
7eec1b2d04 Attach exactly one keyboard to the wscons console. 2000-09-22 04:56:54 +00:00
scottr
e4b50d9bfc Ken'ichi Ishizaka discovered that some devices, e.g. the A3 Mouse, don't
respond in the allotted time if they're told to TALK immediately after
completing a LISTEN command.  Experimentation with adb_op_sync() yielded
consistent results when the timeout was increased from the documented
6900 usec to 8000 usec, so we'll make that change here.

(Accurate and complete documentation of the hardware sure would help...)
2000-09-19 05:17:55 +00:00
thorpej
72a24b4eae Add an align argument to uvm_map() and some callers of that
routine.  Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
2000-09-13 15:00:15 +00:00
scottr
ff2130346c Resolve bus_space_write_region_2() type mismatches. 2000-09-13 05:21:16 +00:00
scottr
7eb72c4f15 ae_write_mbuf() broke with the last change; revert. 2000-09-13 05:16:47 +00:00
thorpej
4db6fc7542 Make need_resched() take a "struct cpu_info *" argument. This
causes gives a primitive form of processor affinity.  Its use in
roundrobin() still needs some work.
2000-08-25 01:04:06 +00:00
thorpej
58e7a6954b Add spllock(). See spl(9) for details. 2000-08-22 19:46:26 +00:00
thorpej
a86d1f4891 Add a lock around the scheduler, and use it as necessary, including
in the non-MULTIPROCESSOR case (LOCKDEBUG requires it).  Scheduler
lock is held upon entry to mi_switch() and cpu_switch(), and
cpu_switch() releases the lock before returning.

Largely from Bill Sommerfeld, with some minor bug fixes and
machine-dependent code hacking from me.
2000-08-20 21:50:06 +00:00
itojun
85dda25e94 move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
briggs
8d6c85d001 Remove hack for unswapped read/write_multi in swapped space.
Driver now uses read/write_multi_stream_2.
2000-08-01 13:08:39 +00:00
briggs
3ce3697584 Add bus_space_*_stream_N functions. 2000-07-31 22:40:25 +00:00
briggs
bd823b939e Fix code to read a string from the nubus board--it was not terminating
the string properly when the string on the board is longer than the
pre-allocated space.
2000-07-31 22:39:17 +00:00
briggs
2cc07c0541 Add a DIAGNOSTIC panic if (count-using) bus_space macros are called with
a count of zero.  Some drivers do this accidentally and some bus_space
implementations will fail if count is passed as zero (they are set up in
a do-{}-while structure).
2000-07-31 14:59:15 +00:00
briggs
3717acff97 We may wish to install from an SMC-based ethernet, too. 2000-07-31 02:06:48 +00:00
briggs
f5882c7ffa Make sure that bus_space read/write functions that take a count will not be
called if count is zero.  The smc91cxx driver, for example, may try to call
bus_space_write_multi_2() with a count of 0.
2000-07-30 23:17:23 +00:00
briggs
2f76646af1 Some uncommitted poking around. No functional change. 2000-07-30 21:48:54 +00:00
briggs
1e909ae3ca Add SMC-based ethernet and nsphy (AsanteFAST) and ukphy (just in case). 2000-07-30 21:46:39 +00:00
briggs
e74ae8ee59 M.d. glue for nubus SMC 91cxx-based cards--including Focus Interlan and
AsanteFAST.
2000-07-30 21:43:40 +00:00
briggs
fb9995989b Make bus_space_write_region_2 usage match prototype. 2000-07-30 21:41:59 +00:00
briggs
d13747524c Fixup for bogus assumptions about bus_space_handle_t. 2000-07-30 21:40:49 +00:00
briggs
c131e0d1b7 Remove unsupported Focus hardware--this is now probed in if_sm_nubus. 2000-07-30 21:40:09 +00:00
briggs
2bb296de77 Update hack to point to bus_space_handle base address. 2000-07-30 21:39:16 +00:00
briggs
9c85d4dc6a Add byte-swap and stride options to bus_space. Allocate as normal, then
call mac68k_bus_space_handle_swapped() or mac68k_bus_space_handle_set_stride().
Stride is untested.  Swapped code works for SMC ethernet.
2000-07-30 21:38:02 +00:00
briggs
a3f6fd2274 Add nubus attachment for smc91cxx driver. 2000-07-30 21:36:04 +00:00
briggs
5d162e9bcf Add Sigma Designs L-View and AsanteFAST product codes. 2000-07-26 04:36:16 +00:00
briggs
98cdbc4cc9 Remove advertising clause with my name. 2000-07-26 04:35:46 +00:00
scottr
c019fa32ca Revert a bit of the last change to make this compile again. 2000-07-05 07:33:52 +00:00
sommerfeld
502fc00210 Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
broken/fragile.  Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it.  See kern/10500, kern/8994 for the gory details.
2000-07-05 04:07:22 +00:00
scottr
d08e3b12a4 Stabilize ADB support for some non-Apple ADB peripherals. This is the
second (and final) part of the fix for PR 10086.  (There are no longer
any infinite-wait busy loops in the ADB driver!)
2000-07-03 08:59:26 +00:00
scottr
da62d2ef12 Avoid attaching on the Mac TV, as this system seems to not be
completely backward compatible to the II-series sound hardware.
2000-07-02 21:10:14 +00:00
scottr
95497e28ce Add video hardware info for the Performa 550 and Macintosh TV. 2000-07-02 20:59:58 +00:00
cgd
a5c13f9ad4 Kwality control:
* put #includes of opt headers and headers to get protos used by
  net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
  in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
  local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
  netisr_dispatch.h (pc532) to use it.
2000-07-02 04:40:33 +00:00
mrg
e6b451c8a6 fix wrong comment. 2000-07-01 03:35:07 +00:00
itojun
d76ae83df8 add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized
2000-06-30 17:10:15 +00:00
mrg
28d898391b remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h> 2000-06-29 08:10:45 +00:00
mrg
e185413725 remove redudant <vm/pmap.h> includes. <vm/pmap.h> -> <uvm/uvm_pmap.h> 2000-06-27 04:18:48 +00:00
kleink
e695f72a2e Add <machine/int_types.h>, which provides namespace-pure definitions
of exact-width integer types.
2000-06-26 15:42:16 +00:00
mrg
2f159a1bac remove/move more mach vm header files:
<vm/pglist.h> -> <uvm/uvm_pglist.h>
	<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
	<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
	<vm/vm_object.h> -> nothing
	<vm/vm_pager.h> -> into <uvm/uvm_pager.h>

also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
simonb
889c658b5b Change the kernel mmap interface so that the offset to map is an
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes.  Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".

Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
2000-06-26 04:55:19 +00:00
wrstuden
491d7e6764 Fix logic bug which would keep PPS from working. Noticed by:
Charles Carvalho <carvalho@cisco.com>
2000-06-25 20:55:33 +00:00
mrg
c543a66253 remove some redundant <vm/vm_xxx.h> includes 2000-06-25 13:26:19 +00:00
fvdl
1ee7d22c0b Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC. 2000-06-22 20:27:49 +00:00