fe72ae262f
Rebuilt from 'isapnpdevs'.
1999-04-18 13:21:01 +00:00
690bd69d3e
Add Diamond Supra 336i to device list.
1999-04-18 00:35:30 +00:00
c28fffe947
Fix enet_vendor entries for Compex Linkport Enet B (PR 7238)
1999-04-16 22:35:49 +00:00
cd6eaa20b1
Print register contents before we modify it.
1999-04-16 13:35:41 +00:00
6224c1beda
Correct wrong board IDs (used ID definition from FreeBSD)
1999-04-15 23:51:44 +00:00
b5f3e628a3
If setting to pio mode < 3 fails, try to set pio mode 3 before returning
...
EIO. The spec says ATAPI devices should support "PIO 3 or better".
They are supposed to support less as well. Setting the device to a highter
mode than the controller shoul'nt be a problem, and this is likely what
happens with legaty ISA controllers.
Solve problem reported by Ruey-Shyang Guo.
1999-04-15 16:21:27 +00:00
94d00cdb29
Bump timeout to 10s only for ATAPI devices, 1s is fine for IDE drives once
...
they are ready.
1999-04-15 09:41:09 +00:00
c0735a01c5
Replace qvss8x15 with version from NetBSD/vax, which contains the full ISO
...
character set.
1999-04-14 23:06:26 +00:00
380d12dfbd
Complete bugfix in rev 1.3: increase read-parameter-block timeout to 10s
...
(as used for the hardware for which rev 1.3 was made.)
1999-04-14 22:23:15 +00:00
9603b90966
Add missing RCONS_2BPP and RCONS_16BPP options for compatibility with code
...
that has not yet changed over to 'rasops'.
1999-04-14 18:43:24 +00:00
619320f97d
Remove courier11x18 due to licensing concerns. Fixup license on lucida16x29.
1999-04-14 18:25:47 +00:00
af729a150c
initialize 'p' for lame gcc-2.7.2.2 flow analysis.
1999-04-14 03:26:34 +00:00
0028097812
Fix ex_read_eeprom() for 3c57x.
1999-04-13 23:07:25 +00:00
979a80207e
Fix duplicate "3com" from attach, as noted in PR#7607.
1999-04-13 22:34:05 +00:00
4084111fca
Make copyrights conform.
1999-04-13 20:37:21 +00:00
2bf9a70e67
Endian-ness bugfix for elink3 on big-endian hosts.
...
Big-endian CPUs should use bus_space_{read,write}_multi_stream methods
to PIO packet data to NIC in 16-bit or 32-bit chunks.
Make it so.
Since we don't have stream methods on all ports yet (esp. i386), use
the bus_space_{read,write}_multi methods if the compile-time
stream-method feature-test macro is not set.
Originally from tsubai@netbsd.org , via HAYAKAWA koichi's cardbus patches.
1999-04-13 20:23:52 +00:00
1c9990c901
Removed pending write of fully-functional MI driver.
1999-04-13 19:06:54 +00:00
ce7a13c654
Remove px driver pending write of fully-functional MI driver.
1999-04-13 19:06:53 +00:00
8fe6730f9a
Many enchancements to rcons to support ANSI color and all attributes
...
properly. All output now performed using a 'struct wsdisplay_emulops'.
1999-04-13 18:43:17 +00:00
a9ef1be75b
iso8x16 font removed until such time as licensing can be clarified.
1999-04-13 18:34:13 +00:00
d8a02e8017
Code cleanup. Add ri_bswap member to 'struct rasops_info' to indicate that
...
framebuffer endianness differs from CPU (for 15,16,32-bit displays).
1999-04-13 03:02:40 +00:00
de43e7cc8d
Fixed licensing due to a foobar on my behalf.
1999-04-13 00:40:07 +00:00
7db08b6507
Initial import of wsfont, an in-kernel font table for wscons/rcons.
1999-04-13 00:24:05 +00:00
14d2ed835e
Initial import of 'rasops', the new raster operations set for wscons/rcons.
1999-04-13 00:17:57 +00:00
9e87738e9d
Add entries for TI, Ricoh, Toshiba PCI-to-cardbus bridge chips, so
...
we can identify them as cardbus chips supported by the cardbus patches.
Add entry for OPTI chipsets whose interrupts arent properly set up by
some BIOSes.
From cardbus patches<ftp://nandra.iri.co.jp/pub/NetBSD/CardBus by
HAYAKAWA Koichi <haya@tcad.ulsi.sony.co.jp>.
1999-04-12 23:18:16 +00:00
b13e5d1469
Quote "AS IS" as in the majority of Carnegy Mellon notices.
1999-04-12 20:38:17 +00:00
4882ae464f
Fix a couple of compiler warnings on the Alpha. Pointed out by Tim Rightnour.
1999-04-12 19:39:59 +00:00
4622761326
Enable workaround for isapnp assigning already used interrupts to pnp
...
cards by masking them out with a "options ISAPNP_ALLOC_INTR_MASK=..."
in kernel config.
1999-04-12 19:31:27 +00:00
ecab881e98
PR 6852 from Chris Jones <cjones@hideo.nervana.montana.edu>.
...
This handles the interrupt structure of Compex boards.
1999-04-12 04:31:55 +00:00
503de51fdd
Fix probe code for IDE devices:
...
- Don't rely on ATA signature: some ide controllers seems to not transmit it
properly (SIMIDE on arm32 machines). Instead, when we guess a drive is here
after reset, just mark it as ATA and OLD is it's not ATAPI.
- at attach time, use IDENTIFY to eliminate ghost from the probe. If the
drive had the old flag and IDENTIFY failed, issue a WDCC_RECAL command
to detect a pre-ATA disk. If IDENTIFY succeded, remove the OLD flag,
it's obviously not a pre-ATA disk.
- add a new controller flag, WDC_CAPABILITY_PREATA, used to shorcut parts
of the probe (not necessary, but makes the probe/attach faster). This is
only set by the ISA front-end, all other controllers supported can't have
pre-ATA drives attached.
The mechanism used are more or less the same as before, they have just been
reordered. Should solve port-arm32/7324 (waiting for feedback).
1999-04-11 20:50:28 +00:00
2a614bc836
add support for 80x40 screens
1999-04-10 14:02:11 +00:00
71c5a6babd
Fix ethernet address location for Compex Linkport ENET-B. From PR 7238.
1999-04-09 23:19:27 +00:00
57ba75e2fc
Correct a misleading comment copied over from the PCIC version of this file.
1999-04-08 16:14:29 +00:00
e91bdf1c67
Add SCSI_IGNORE_NOT_READY to the flags for CDIOCCLOSE: some devices will
...
attempt to spin up, and report an error if there's no CD. Fixes port-i386/7345.
1999-04-08 16:12:31 +00:00
c2752835f7
Fix a long-standing bug with the ACAP_* flags:
...
- the cap field is a u_int8_t, so none of the defined flags would fit in.
Looks like nobody had a drive using 16 bytes commands.
- the ACAP_DRQ_* flags are all wrong. Just remove them and use the definitions
from ata/atareg.h, there's no need to duplicate theses. The effect of this
was that we were always polling for the command phase, even for drives
with interrupt DRQ. This didn't break until the code was changed to support
shared interrupts.
Should fix the lookup problems or 'boot hangs' reported by some users, and
kern/7111.
1999-04-08 11:29:01 +00:00
9f560505d4
Allow re-writing parity on a RAID 0 to trivially succeed, and to set the
...
clean bit. This is somewhat bogus as RAID 0 does not have any parity,
but is a slightly cleaner than other solutions, and makes the handling
of clean bits for RAID 0 consistent with the handling of clean bits at
other RAID levels.
1999-04-07 14:17:10 +00:00
29936d77d4
Now that we do real use of CDIOCCLOSE, we can have SSS_START|SSS_LOEJ
...
in scsipi_start(). Adjust test so that timeout will let enouth time to
the drive to spin up.
1999-04-07 12:47:27 +00:00
4397d4c1fd
convert tabs to spaces in ascii art circuit diagram
1999-04-07 10:21:31 +00:00
29ddb0a0af
regen
1999-04-07 08:21:42 +00:00
7fdc304a14
Add another USR modem
1999-04-07 08:21:25 +00:00
cadb84965d
Use complete sentences in the generated comments.
1999-04-06 23:03:44 +00:00
17c3351354
Regen.
1999-04-06 23:02:31 +00:00
31f94ae97e
Add Leopard 56k PnP, from PR 7330.
1999-04-06 23:02:09 +00:00
c40eb1cd97
Fix a pasto in copyright text which has been procreating like rabbits..
1999-04-06 20:09:18 +00:00
2198b984e8
Kill an extra 'pciide0: ' in a printf
1999-04-06 17:49:14 +00:00
7a304dfe1b
If scsipi_command() fails, always print out the error code.
1999-04-05 19:19:34 +00:00
bf88fc82eb
Adjust timeout for 'ielem' to match the comment: 5 mn (not 5s) per element +
...
10mn initial.
1999-04-04 12:20:48 +00:00
2b311c7218
roll internal revs
1999-04-04 02:29:51 +00:00
a529f8f3b4
firmware revision now a triple
1999-04-04 02:29:34 +00:00
cd0cf2b5ca
Make firmware revision a triple. Clean up some FC init stuff for
...
board versions with no BIOS. Separate mailbox interrupts from
IOCB interrupts. Read OUTMAILBOX5 while RISC_INT is active- not
after you clear it (potential race condition). Clear out older broken
BIG_ENDIAN goop. Don't negotiate narrow/async for LVD busses at startup
if already in LVD mode. Note usage of presumptive 1040C revision. For
all the LIP, PDB Changed, Loop UP/DOWN async events, mark fw state
as unknown as well as marking the need to do a getpdb on targets- after
a LIP for certain the f/w has to do PRLI/PLOGI for all targets again
and marking f/w state as unknown gives us a fighting chance to (start
to) hold up for that to complete.
1999-04-04 02:28:53 +00:00
0fc69df287
Remove incorrect BIG_ENDIAN defines and substitute in the SBus only macros
...
that will SBusify an isp header or the lun/target portions of a request IOCB-
and have these only valid iff __sparc__ (no non-sparc SBus machine that *I*
know about).
1999-04-04 01:32:44 +00:00
b7406cc163
Change f/w revision to major,minor,micro version. Add in ISP1040C definition.
1999-04-04 01:27:06 +00:00
e6a460c3f3
roll ISP1040 and ISP2100 f/w to latest release
1999-04-04 01:21:02 +00:00
eebeea5b23
Read the board revision and trim cache line size back from 16 to 1
...
for early revision 2100 boards. Make sure to turn ROM off for these
boards.
1999-04-04 01:14:58 +00:00
285bee1d61
Regen.
1999-04-03 19:03:02 +00:00
2198f62dd1
Add Visiion camera and Macally mouse.
1999-04-03 19:01:57 +00:00
28903948b1
Add legacy support register.
1999-04-03 19:01:20 +00:00
946efa06b3
Improve debug output a little.
1999-04-03 19:00:43 +00:00
7793bb6998
Generate grammatically correct sentences.
1999-04-03 18:59:51 +00:00
ecbea6c6a0
More things to do.
1999-04-03 18:58:52 +00:00
9737cf763a
Fix a problem where no Tx Empty interrupt ever happened if CTS
...
was deasserted and we wanted to change parameters to -crtscts
This effectively stalled the transmitter since with TS_BUSY set
we only change parameters during the Tx interrupt handler.
1999-04-03 13:13:19 +00:00
65235b4248
Regen.
1999-04-03 11:57:02 +00:00
75fd6f5433
Add Microsoft Natural Keyboard.
1999-04-03 11:56:39 +00:00
b43b844f6f
- change the interrupt routines to take a 3rd arguments, set to 1 if we
...
are called from the interrupt or timeout handler, 0 otherwise.
- use this to know if we can busy-wait for wait_for_unbusy or wait_for_ready
This fixes a bug where CDs withot the DRQ_INTR capability would not busy-wait
for the CMDOUT phase.
While I'm there change 2 delay() to DELAY() for consistency, and
garbage-collect some old code from wdcintr() which has been ifdef'd out
for some time now.
1999-04-01 21:46:28 +00:00
3f80ba486e
don't allow /dev/random to be opened (return ENXIO) until there is at least
...
one active entropy source
1999-04-01 19:07:40 +00:00
500edb5379
Fix typo. (From PR 7027)
1999-04-01 14:55:25 +00:00
00a4d0521a
use defopted WSCONS_SUPPORT_PCVTFONTS, refuse to load pcvt fonts if this
...
option is not given, suppress complaints in non-debug case
1999-04-01 11:52:42 +00:00
4f0acde07b
defopt WSCONS_SUPPORT_PCVTFONTS
1999-04-01 11:50:02 +00:00
4384fd5134
Fix big-endian support.
...
TULIP_BUSMODE_BIGENDIAN does bswap packet buffers also, so we should use
TULIP_BUSMODE_DESC_BIGENDIAN on big-endian machines. (PR 7027)
XXX 21040 doesn't have this bit, but supporting only 21041+ is better than
nothing.
1999-04-01 11:02:20 +00:00
833fb0ac7f
back date this file to version 1.155 which works on the shark.
1999-03-31 12:44:04 +00:00
bb47e5aecf
Increase some DELAY(), this seems required on some hardware (I'm not sure if
...
the hardware is at fault, or if DELAY(1) waits for less than 1us).
Improve debuging messages for wdcreset_wait().
1999-03-31 11:18:31 +00:00
2f91607aff
Enable this is a non-entropy rnd source.
1999-03-30 21:02:41 +00:00
ae7f25d8af
Fix a typo.
1999-03-30 20:07:56 +00:00
ca5dd9fee7
The AD1848/CS4231 attachment doesn't create DMA maps any more, so we have to
...
do it here. This is preferrable anyway, since we're not actually doing DMA
through the AD/CS chip.
1999-03-30 16:40:47 +00:00
d5a261206d
Replace the #ifdef'ed variable DELAYs with a pair of non-ifdefed
...
DELAY(1)'s. This should fix interrupt driven lpt driver hang and
reboot problems for the group of users who have experienced them, and
shouldn't hurt anyone else.
1999-03-29 21:50:06 +00:00
c45bee7307
Regen.
1999-03-29 21:36:00 +00:00
05eae31620
Now that he ESS 1868 and 1869 are working, enable them here.
1999-03-29 21:35:19 +00:00
401d03761f
Initialize automatics in stp4020print(); noticed by Jonathan O'Brien.
1999-03-29 21:30:48 +00:00
20d6f6afe6
Regen.
1999-03-29 17:24:33 +00:00
8333badc92
Add Epson printer cable.
1999-03-29 17:23:45 +00:00
f487bc59aa
Nuke bogus extra variable, too.
1999-03-29 13:40:41 +00:00
85ad0d175c
Fix bogons in previous change:
...
* The fact that IIR_NOPEND was not set on entry does *not* mean that no
transmission was in progress. Besides, we don't want to throw away receive
interrupts either.
* In the !clearirq case, we didn't splx().
1999-03-29 13:21:15 +00:00
5ecfcfbb96
Make `sun4m DMA not supported yet' message print only for this device,
...
rather than every sbus device probed.
1999-03-29 12:04:43 +00:00
d58a5af79d
Fix multicast hashing function. PR 7274, from Izumi Tsutsui
1999-03-29 11:11:34 +00:00
6a228da053
Mods to com_common_putc(). When doing kprintf() or kgdb output:
...
1. don't clear the irq unless it was clear before transmitting
2. also do various bus_space_barrier() ops
Stops console from freezing when kprintf interrupts tty driver output.
1999-03-29 10:01:39 +00:00
ad69d389ab
Remove the hack to attach devices responding with ATA signatures as atapi if
...
IDENTIFY said so: it doesn't help for the drive this was supposed helping,
and seems to break another device.
In interrupt routine, don't return 0 if we are polling: this should fix the
"panic: wdc_exec_command: polled command not done" some people reported
(kern/7269).
1999-03-29 08:32:02 +00:00
ed7699b360
- Unnecessary to have '#include <machine/autoconf.h>' for those.
1999-03-29 07:22:02 +00:00
4f36436461
add fields for bus_apace tag and handle to ioasic_softc
1999-03-28 17:47:28 +00:00
777c326ff7
Make it possible to force 16 mode via "flags 4" in kernel configuration.
...
Patch supplied by Martin Husemann on "current-users", fixes PR kern/5673.
1999-03-28 12:51:49 +00:00
1663f7072b
remove a diagnostic panic in the keyboard autorepeat timeout() handler.
...
There is a rece condition which might trigger this but is harmless
otherwise. Leave the handler silently instead.
1999-03-27 11:22:23 +00:00
14de6c2418
Cleanup shutdown code - garbage collect (now) unused shutdownhooks() stuff.
1999-03-27 01:26:37 +00:00
df93e67c02
PPS support. Copied off of com.c support, with changes as DCD interupts
...
are only enabled if needed and if ok'd by MD layer.
1999-03-27 01:22:36 +00:00
e50460f5fa
Oops- if you enable 1080 support, remember to load the f/w
1999-03-27 01:08:59 +00:00
9d326d488b
defopt RCONS_2BPP and RCONS_16BPP
...
add support for 16bpp framebuffers as found on color nexten.
1999-03-27 00:07:58 +00:00
d8aa229a12
roll internal release tag
1999-03-26 22:45:17 +00:00
99d46bf762
add isp1080 support and some basic PDB change stuff
1999-03-26 22:39:44 +00:00
068cafa92a
In a PC keyboard doesn't accept a "set to scanset 2" command, reset it
...
and ignore the error. Scanset 2 should be the default after reset, so
this allows some broken keyboards to work. (Reset is needed because at
least 1 keyboard locks up if the "set scanset" is attempted.)
1999-03-26 12:39:13 +00:00
3cafeadabd
Add support for the PTI SBS430. It's a FAS200 type chip- it's a bit funky
...
in that the registers aren't spread by a longword like all the other SBus/ESP
cards. Otherwise it's much the same. It'll make Brad Salai happy.
1999-03-26 06:48:40 +00:00
34f3cd7ce9
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:20:22 +00:00
88d8a91205
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves. Fix a bug where packets wouldn't be padded to the correct
minimum length.
1999-03-25 23:19:59 +00:00
9caa955278
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves. Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
1999-03-25 23:19:16 +00:00
ad22c1dd58
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:16:37 +00:00
d3fb0e2ad5
roll internal tag level
1999-03-25 19:41:47 +00:00
1ff88ee466
Avoid busy-waiting when possible if we are not polling (real IRQ or timeout
...
callback). Shared PCI IRQ should now work (but still untested).
1999-03-25 16:17:36 +00:00
d907e1f61e
First pass at support of Compaq NetFlex 3/P PCI: this one has
...
IO and Mem base address register inverted.
Still need some MII hack to get it fully fonctionnal.
1999-03-25 16:15:00 +00:00
6b9af88b99
wrap kernel bits in shared kernel/userland files
1999-03-25 04:09:33 +00:00
7bfd643eab
install if_lmc*.h
1999-03-25 03:54:43 +00:00
0c2f5ada28
Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver
1999-03-25 03:32:43 +00:00
960c283a65
Add LAN Media Corporation info
1999-03-25 03:28:17 +00:00
8ade3b61ba
Add two #ifdef BROKEN_LPT_DELAY's in to the central write byte
...
& strobe cycle. These bracket DELAY()'s of BROKEN_LPT_DELAY
microseconds. This can be used to kludge around mysterious hangs and
reboots some users experience. The cause of these failures is still
not known, but is conjectured to be hardware bug originated failures
in the bus cycle.
1999-03-25 02:17:38 +00:00
77597ecd3e
Start commit of Lan Media Corp T1/HSSI/DS3 driver
1999-03-25 00:51:53 +00:00
01ea9a1dd8
Regen.
1999-03-24 21:07:26 +00:00
029f0b9d86
Silicon Integrated Systems OUI and the SiS 900 PHY model number.
1999-03-24 21:07:04 +00:00
0ed038285c
Remove leftover definition of AUDIO_DEBUG.
1999-03-24 20:59:21 +00:00
fe0bb65b38
in general, it's a good idea to make sure you at least have all of the
...
variables you reference, before you commit something...
1999-03-24 18:47:51 +00:00
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
3993ee01e4
Don't enable I/O or memory access here! These bits in the PCI CSR are
...
set up by the firmware, and indicate which mapping types the system
supports.
1999-03-24 01:07:59 +00:00
ac0f626cca
Make sure bus mastering is enabled.
1999-03-24 01:05:15 +00:00
9f85a4a798
Make sure bus mastering is enabled.
1999-03-23 23:18:50 +00:00
1c99e4196a
Use BUS_SPACE_ALIGNED_POINTER() instead of ALIGNED_POINTER() where the pointer
...
in not just used to access memory but is bassed to bus_space_xxx_n()
methods. For debugging purposes, bus_space can have additional constraints
which will be properly met by BUS_SPACE_ALIGNED_POINTER().
1999-03-23 21:41:07 +00:00
f44fb0d91c
A backend for Databook's TCIC family of PCMCIA chips.
...
Thanks to Andreas Lohrum, O'Reilly Verlag, Terry Moore, and Holger Czukay
for hardware, documentation, and support.
1999-03-23 20:04:14 +00:00
5575305f99
If no screen got the "focus" (which happens with serial console or if
...
the current screen is deleted), automatically give focus to the next
screen created. Saves the need to switch to a usable screen manually.
1999-03-23 15:56:56 +00:00
b0de87c45f
To clear a chunk of bus memory use bus_space_set_regionN().
1999-03-23 12:01:45 +00:00
54ae4d24b8
Call bus_dma_[un]load() at splbio.
1999-03-23 00:38:15 +00:00
c3eb74e089
Check for Sbus slave access errors.
...
Call bus_dma_load() with elevated priority.
1999-03-23 00:32:27 +00:00
d86e93c62a
Fix promiscuous modes - patches from Jason Wright.
1999-03-23 00:27:09 +00:00
a4e508928f
Oops. RcsID police.
1999-03-22 23:01:36 +00:00
e09c06e04d
Regen.
1999-03-22 22:36:49 +00:00
579b0fce1b
Recognise IBM and 3COM Token-Ring PnP cards and associate them with the tr
...
driver.
1999-03-22 22:36:10 +00:00
ce0465b40f
config(8) glue for Token-Ring and TROPIC drivers.
1999-03-22 22:33:35 +00:00
a8e47bd29b
Add TLINK_619_POLY.
1999-03-22 22:26:27 +00:00
2c16793ee5
Chipset driver for TROPIC based Token-Ring cards.
...
Frontends for IBM and 3COM ISA cards.
By Onno van der Linden <onno@simplex.nl>.
1999-03-22 22:21:26 +00:00
f124765044
More and more .Os cleanups. .Os is defined in the tmac.doc-common file,
...
so we shouldn't override it with versions in the manpages. Many more to
come.
1999-03-22 18:25:43 +00:00
b2c812d776
set "fontset" variables to 0 if no appropriate font was found for a
...
freshly allocated screen, should fix panic if "vga_mapchar()" it
attempted later
1999-03-22 18:24:23 +00:00
d48e548abb
defopt WSDISPLAY_DEFAULTSCREENS
1999-03-22 16:50:54 +00:00
330c5ea7a2
Create DMA maps at open time.
1999-03-22 14:54:01 +00:00
9e4bd01bff
Make sure we clean up any DMA maps if the open fails.
1999-03-22 14:38:02 +00:00
41d5307e95
One minor change to previous.
1999-03-22 14:32:59 +00:00
f887d74c45
Nuke sc_iooffs from orbit. This is exactly what bus_space_subregion() is for.
1999-03-22 14:29:14 +00:00
6ada3afd8b
Reject variant numbers which are too large (so that a new version of isapnpdevs
...
with an old driver will not lose mysteriously).
1999-03-22 10:00:09 +00:00
2cccf3bd4a
Update callers of isapnp_devmatch().
1999-03-22 09:44:12 +00:00
cbd5623c72
Add support for switching Aztech chips into WSS mode.
1999-03-22 09:43:12 +00:00
86d586012a
Regen.
1999-03-22 09:41:58 +00:00
8e0df99c1e
Add variants numbers, and Aztech AZT2320 bindings.
1999-03-22 09:41:10 +00:00
77274e73c6
Add a `variant number' to the tables, so we can handle slight variations in
...
the chipset without doing something substantially more gross.
1999-03-22 09:38:57 +00:00
cfe7413adb
Make 48KHz output work.
1999-03-22 07:58:55 +00:00
5f6bb6237b
Do the splaudio()/IPL_AUDIO hack here, too, so that MPU attachments can see
...
it.
1999-03-22 07:57:15 +00:00
878708a06b
Adjust for MPU attachment change.
1999-03-22 07:41:36 +00:00
fd400e0ddc
Add a kluge to ignore I/O and memory ranges with a size of zero, so we don't
...
blow up in bus_space_{map,unmap}(). At least one card uses this to `disable'
a logical device.
(XXX There's probably a better way to do this.)
1999-03-22 07:40:57 +00:00
ccbad3061c
Add a mpu_isapnp attachment.
1999-03-22 07:39:33 +00:00
97de30ff26
Several things:
...
* Rearrange the speed mapping table and adjust the code so that the highest
rate can actually be used. Previously we ended up rounding up slightly
lower speeds and then losing because set_params couldn't set the mode
back to the current one.
* Allow 260 as a valid I/O address, since the SB1 can be jumpered to this.
* Change the MPU-401 code so it can be attached as a separate device.
(XXX Really, the SB code ought to just attach a subdevice itself.)
* Do not attach an OPL on the SB1. Writing to the OPL registers at
SB_base+0 on this card wedges my machine.
(XXX Should we access it at 388 instead? The Creative web site claims
that this board *does* have an OPL2, but I haven't played with this
extensively.)
* Allocate the SB DMA channels at open time, rather than attach time, so
that a single DRQ can be used for multiple cards (if only one is in use
at a given time).
(XXX Let me tell you why this is a horrible hack. If the ISA DMA code
tries to allocate a bounce buffer after boot time, it will generally fail,
because there is no contiguous memory below 16MB and the code to allocate
contiguous pages doesn't know how to move things around. Now, we
shouldn't ever be using bounce buffers here, because we use
isa_dmamem_alloc(). So we just turn off BUS_DMA_ALLOCNOW and we don't
actually try to. That's cool, and it even works, but isa_dmamem_alloc()
has the same problem. It just happens that we allocate the ring buffers
at boot time, and whenever we reallocate them (due to the buffer size
changing), we just deallocated the previous (contiguous) buffer, so we get
lucky. This is absolutely disgusting and needs to be fixed.)
1999-03-22 07:37:35 +00:00
1337db796b
Adjust the probe routine to work on chips where the mic preamp bit is shared
...
between register I0 and I1.
1999-03-22 07:27:46 +00:00
ee5f90d04c
If bus_dmamap_create() fails, free the DMA channel.
1999-03-22 07:06:09 +00:00
fc841e81b5
Get the index on the buffer (in addition to the descriptor) correct.
1999-03-19 22:43:11 +00:00
14c68aa23d
Defined KEY_CAPSLOCK.
1999-03-19 18:34:01 +00:00
036ec6601c
Add FDC_HEADSETTLE to wait for the heads to settle timeout
1999-03-19 16:09:57 +00:00
5b00b99bef
Allow DRQ[A-C] to be used on the 1888 as well.
1999-03-19 12:40:21 +00:00
f60907c286
Regen.
1999-03-19 06:40:11 +00:00
4e92fb2fd1
Add AudioPCI 97 (a.k.a. Creative Ensoniq AudioPCI).
1999-03-19 06:39:32 +00:00
fa26744c04
don't need isa_machdep.h, since isavar.h is included
1999-03-19 05:42:00 +00:00
d324c9f2f6
pull isa_machdep.h in from machine/ instead of from $(MACHINE)/isa/
1999-03-19 05:13:16 +00:00
ff42ff62e8
pull pci_machdep.h in from machine/
1999-03-19 03:37:52 +00:00
a6eca03c65
pull ofisa_machdep.h in from machine/
1999-03-19 03:30:35 +00:00
1f2cf84892
pull isapnp_machdep.h in from machine/
1999-03-19 03:24:19 +00:00
49f4da1c43
pull tc_machdep.h in from machine/
1999-03-19 03:13:21 +00:00
6ac54498c7
pull eisa_machdep.h in from machine/
1999-03-19 03:01:50 +00:00
b71ea6aad4
Use correctly bus_space_*() macros to access device registers.
1999-03-19 02:32:48 +00:00
270a41c358
We only have one IRQ.
1999-03-19 01:21:24 +00:00
b45b384ea1
Also fix ia_iosize.
1999-03-18 20:57:11 +00:00
5a20d4df8d
Some fixes to the IRQ/DRQ configuration, and the probe output.
1999-03-18 20:55:50 +00:00
43b95688fe
regen
1999-03-18 17:07:51 +00:00
f5489c46e2
aic at isapnp is reported to work with AVA-1505A boards too
...
(by "Elephant's Root" <root@elephant.nervana.montana.edu>,
PR kern/7179),
add the device id and the compat id used by this board
1999-03-18 17:07:09 +00:00
0cdb143eaf
Initialize pipe structure properly. From Joel Chen <jchen@nc.com>
1999-03-18 12:08:43 +00:00
813fb95309
The chip is only rated for 44.1KHz, and will not record faster that 46.794KHz,
...
so adjust ESS_MAXRATE. ESS_MINRATE was also wrong, not that anyone cares.
1999-03-18 07:11:21 +00:00
b6ee330d4e
dmapos should start at 0, in theory.
...
Also experimentally force polling mode.
1999-03-18 06:04:21 +00:00
81d2718d5b
Add support for polling.
1999-03-18 06:03:31 +00:00
039246b8d5
Add support for polling.
1999-03-18 04:31:36 +00:00
efe288e520
Correct a component label problem where a RAID 1 set with a
...
failed component would not configure properly in certain situations.
1999-03-18 03:02:38 +00:00
ff4754d6e5
Confirm that there was an interrupt before handling it. Allows IRQs to be
...
shared with other devices.
1999-03-18 02:44:27 +00:00
4bd7ef0241
Adjust for structure name changes.
1999-03-17 22:19:35 +00:00
ce18d4bd84
corrected the "generated from" lines by running make -f Makefile.isapnpdevs
...
AFTER committing isapnpdevs.
1999-03-17 21:11:57 +00:00
1954300d6c
Regen.
1999-03-17 19:21:49 +00:00
0d433f490b
Add Silicon Integrated Systems SiS900 10/100 Ethernet.
1999-03-17 19:20:51 +00:00
4ca95ee66e
prototype ioasicprint
...
XXX pmax XXX I think someone is using the MD proto and the MI func on pmax
1999-03-17 18:24:57 +00:00
af9df0ab31
Revert to a 10s timeout, 1s is too low for drives in sleep mode.
1999-03-17 10:13:56 +00:00
c312dfb410
prototype 1080/1240 support caused register offset rewhack
1999-03-17 06:17:16 +00:00
d596b20f1e
prototype 1080/1240 support
1999-03-17 06:16:42 +00:00
008b51d0a6
Update the driver with some infrastructure for the 1080. Fix an embarrassing
...
clock botch bug. Additional infrastructure for PDB change stuff.
1999-03-17 06:15:47 +00:00
690045798e
roll internal tag
1999-03-17 05:11:57 +00:00
72c7f98bd8
add in 1080/1240 f/w, plus options to not compile stuff in
1999-03-17 05:11:13 +00:00
8ace2247cb
Fix a couple of other places we should avoid the Audio2 DRQ on the 1788.
1999-03-17 02:39:59 +00:00
81a1ade358
More redux:
...
* Use a single routine to halt both input and output on Audio1.
* Reduce the number of register reads/writes used to set up a channel.
* A few other minor things.
1999-03-17 01:06:17 +00:00
16ef4e3349
Add entries for USR Sportster 14.4K and 33.6K
1999-03-16 22:58:17 +00:00
e380eb62d5
Tron whacked my you-know-what because I didn't follow procedure.
...
So I insered his description of the 'procedure' in the most likely
place a developer will find it.
1999-03-16 22:41:56 +00:00
ddbc34d638
Regen from "pcidevs".
1999-03-16 22:32:58 +00:00
f4ccb35266
Add a "+1" in sca_start which should fix the limit of 2 transmit buffers. Also, kill some duplicate code.
1999-03-16 21:29:23 +00:00
f50c9fa8ea
add Qlogic 1080 && 1240 product IDs
1999-03-16 21:24:46 +00:00
84f100d175
Audio1 does not support 16-bit DMA. Eliminate some code that tried to handle
...
that case.
1999-03-16 14:17:00 +00:00
16cc2ad23b
Uncomment ioasic_subr.c.
1999-03-16 14:07:22 +00:00
79f173e5f3
Add NetBSD RCS id on first line.
1999-03-16 13:53:39 +00:00
13d43eb62b
Fix old typo.
1999-03-16 13:37:23 +00:00
e085a0c921
A little more cleanup.
1999-03-16 13:32:25 +00:00
28e080a143
Minor fix to some debugging output.
1999-03-16 13:24:27 +00:00
9e041fd850
Adjustments for structure name changes.
1999-03-16 13:07:45 +00:00
3e404912dc
Clean up the previous:
...
* Separate the interrupt handlers based on which channel (audio1/audio2)
rather than which direction (input/output). Only register the handler for
audio1 on the 1788.
* Since the input sides are actually the same, GC the duplicated code.
* Re-KNF in a bunch of places.
* Make this work again on the 1887 in the Shark.
1999-03-16 13:06:35 +00:00
3387d026d6
Include machine/bswap.h, needed on big endian machines.
1999-03-15 20:19:57 +00:00
ef79649fc1
MI ioasic softc and child-device structs, gc duplicate struct definitions.
...
Add MI ioasic functions, but dont enable on alpha until tested.
1999-03-15 01:25:26 +00:00
69d2d27c1b
Use bus_space tags and handles, embedded in MD hooks AM7930_{READ_WRITE}_REG
...
to handle MD delay and bus padding. Tested on sparc2 by David Brownlee.
Should use regmaps, but that breaks sparc pDMA assembly code.
1999-03-14 22:29:00 +00:00
2ec2c2045f
Cleanup rf_RewriteParity() and rf_VerifyParity(). Nuke unused stuff,
...
and make more readable.
1999-03-14 22:10:46 +00:00
414b788837
Disallow interrupting parity re-writes or copybacks by removing PCATCH
...
from the tsleep()'s (they probably shouldn't have been there in the
first place!). Making parity re-writing and copybacks interruptable
will require re-designing how a few things are done (e.g. how memory
is freed for structures shipped off to routines that run asynchronously
relative to the calling routine). Fix a few other tsleep's while we're at it.
1999-03-14 21:53:31 +00:00
1ff51fea1a
Some x68k conditionals (I don't know why these are needed...).
1999-03-14 16:14:54 +00:00
4d77aa3c15
Avoid warning if !QBA.
1999-03-13 20:26:50 +00:00
f9b0eec83a
Change vsbus to take a locator for all devices.
...
Figure out interrupt vector/mask on vsbus by forcing all devices to
generate interrupts in the match routine, like on unibus.
1999-03-13 15:16:47 +00:00
7cfac216d7
Don't initialize any virtual screens (except the system console) at
...
autoconfiguration time; this can be done better from rc.local.
(For INSTALL kernels, WSDISPLAY_DEFAULTSCREENS can be defined which
sets up that many screens with default parameters.)
1999-03-13 14:46:20 +00:00
23903bfc0e
Regen.
1999-03-11 05:17:54 +00:00
272f5b609d
Add several VIA Technologies chipsets.
1999-03-11 05:17:24 +00:00
b241f995f0
don't erase the characters moved over on a <TAB>, a real VT100 doesn't
...
do this - thanks Bill Sommerfeld (PR kern/7124)
1999-03-10 19:54:52 +00:00
a6365676fa
Add a new disk flag: DRIVE_OLD for pre-ATA disks. probe routine will now set
...
DRIVE_OLD, DRIVE_ATA or DRIVE_ATAPI based on register signatures.
The attach routine will issue a IDENTIFY command for ATA/ATAPI disk,
to detect flase matches by the probe routine.
probe/attach should now be fully compliant with ata-4/ata-5. As a side
effect, ATAPI drives which improperly use ATA register signatures should now
be attached as ATAPI.
1999-03-10 13:11:43 +00:00
a6d726254d
Un-nest __P().
1999-03-10 12:58:00 +00:00
1cfd38fb3e
oops, fix previous.
1999-03-10 02:19:04 +00:00
5704ad4969
regen
1999-03-09 11:48:59 +00:00
2987883f07
add 2 ISDN cards, from Martin Husemann per PR kern/7110
1999-03-09 11:48:03 +00:00
cd0a696176
Cleanup raidattach: move rf_boot's functionality to raidattach, and
...
nuke rf_boot(). Cleanup raidopen().
1999-03-09 03:53:18 +00:00
e39fe5e2fe
Cleanup unused cruft.
1999-03-09 03:52:41 +00:00
29daf0c77d
rf_update_component_labels() now lives here. Re-work clean-bit
...
support a little: clean-bits now also get frobbed on partition
opening/closing, rather than just at device configuration and device
unconfiguration. Schedule shutdownhooks() stuff for nukage at a later
date, since it isn't really necessary any more.
1999-03-09 02:59:25 +00:00
585c77594e
Move rf_update_component_labels() from here to rf_netbsdkintf.c.
1999-03-09 02:57:29 +00:00
ab80268653
no need to use __P inside __P.
1999-03-09 00:42:41 +00:00
fbda6bed6d
make this compile on SUN4U. XXX icky, reader beware.
1999-03-09 00:42:20 +00:00
ba74f49e60
Keep track of CRC errors in Ultra-DMA mode. If we noticed a CRC error and we
...
need to downgrade, downgrade to PIO, as it has been shown if we got CRC errors
in Ultra-DMA mode, we will have silent data corruption in multiword DMA mode
(isn't IDE wonderfull ? :).
Set timeout to 1s for "normal" ata I/O, to minimise the effects of missed
interrupts.
1999-03-07 14:02:53 +00:00
1b9cb332aa
Don't try to selftest the keyboard port. PC keyboard controllers have
...
shown up which break in 3 different ways, so the test is becoming
pointless.
1999-03-05 10:40:54 +00:00
df7a15e33c
* sparc => __sparc__
...
* wrap Sun disklabel code in `#if __sparc__ || __sun3__' for now.
1999-03-05 10:38:16 +00:00
199f99d192
fix second level interrupt handler to allow 64 bits pointers
1999-03-04 20:15:53 +00:00
fefcc128bf
a kindler gentler fix
1999-03-04 02:38:19 +00:00
7790083b17
adjust format args for compiler changes
1999-03-04 02:20:13 +00:00
439c3fc0cb
- Nuke "PMAD-BA " match string because it is an internal name of IOASIC
...
assisted LANCE circuit found only in IOASIC DECstations. This file is
for 3MAX builtin and PMAD-AA TURBOchannel option card.
1999-03-04 01:39:04 +00:00
80b321b11a
sparc => __sparc__
1999-03-03 12:58:14 +00:00
bd7b26e37d
Add ISA attachment for ess chips.
1999-03-02 20:42:10 +00:00
64fffdfef9
Add support for the 1788 AudioDrive chip.
...
Some minor cleanup; refer to more registers by macros rather
than raw hex constants.
1999-03-02 20:36:50 +00:00
98d8c12355
Update for recent changes including component label support, clean
...
bits, rebuilding components in-place, adding hot spares, shutdownhooks, etc.
1999-03-02 03:18:48 +00:00
e19cedee17
- Make sfb_emulops standard feature of sfb wscons. Scrolling is now
...
acceptable. Still lacks of horizontal copy and glyph rendering with
SFB ASIC assistance. TGA could be benefitted in the similiar way.
1999-03-02 00:22:42 +00:00
f85c9832ac
- Fix cursor image validity check error in set_cursor().
1999-03-01 02:45:04 +00:00
729bfc4dd7
undo commit made in error
1999-02-28 19:03:11 +00:00
c1ab1c57fb
don't collect or estimate on network devices by default
1999-02-28 19:01:30 +00:00
6b24c4b0fd
Cleanup (in preparation for using gzip to estimate entropy)
...
(1) remove unused and probably bad (from an API POV) ioctls,
(2) split tyfl into type and flags,
(3) collect an array of samples, and add them all at once. Soon, this
will be using gzip to estimate the entropy, but for now the original
estimation methods are still used.
(4) kill rnd_add_data() -- it compliated the API for little benefit
1999-02-28 17:18:42 +00:00
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
87ae97e3f0
Fix what is probably a past-o.
1999-02-28 17:01:49 +00:00
0d46b0d0fd
Make "1" an acceptable result in port tests.
...
This is a workaround for crappy hardware, normal keyboard controllers
return a "0".
Should fix PR port-i386/6636 by Krister Walfridsson and problems
reported by chopps and fvdl.
1999-02-28 14:26:38 +00:00
9929e72099
Fix some buglets pointed out by "Brett D. Slager" <bds@snarf.thnet.com>
1999-02-28 10:05:00 +00:00
5c062abb64
Fix the bus print function.
1999-02-27 22:21:13 +00:00
331694119a
Our device name differs from the PROMs node name.
1999-02-27 13:17:08 +00:00
ee9187f136
After a vn_close(), set the vnode * to NULL so we don't try closing it
...
again later.
1999-02-27 03:43:20 +00:00
a76f56098c
Do the VOP_UNLOCK() on an initialized vp, rather than random garbage.
1999-02-27 01:48:13 +00:00
ea0550413c
Make these compile on the alpha when AUDIO_DEBUG is defined.
1999-02-26 01:18:09 +00:00
198f1f5c48
Fix AdvanSys Narrow driver to work on Alpha
1999-02-25 20:21:33 +00:00
ceef7fa3d7
Fix AdvanSys Narrow driver to work on Alpha
1999-02-25 20:20:30 +00:00
8ef8f5c8fb
Fix typo.
...
Fixes last part of PR bin/6883 from Soren S. Jorvang <soren@t.dk>.
1999-02-24 18:54:03 +00:00
46e61f2db1
regen to correct "generated from" as pointed out by Matthias Drochner, thx!
1999-02-24 18:26:37 +00:00
5ff2e5a369
Add entry for Terratec AudioSystem EWS64 CoDec.
1999-02-24 15:37:34 +00:00
65be57243f
Minor cleanups and code rearranging. Now knows a little about component
...
labels and how to deal with hot-adding spare components. Still work in
progress -- component labels and hot-adding are not enabled (yet).
1999-02-24 00:00:03 +00:00
be9eca67c8
Cleanup/remove unused cruft. First kick at component labels and clean bits.
...
Still work in progress. New code is there, but not enabled yet.
1999-02-23 23:57:53 +00:00
07b6b89dce
Move vnode cleanup code into one place. Cleanup a bit.
1999-02-23 23:55:29 +00:00
0d29172def
Do a VOP_UNLOCK() before a vn_close().
1999-02-23 23:53:37 +00:00
281bba9355
Update for minor changes in the ad1848 back end.
1999-02-23 21:16:27 +00:00
eab52d94b3
Fixed AdvanSys Ultra Wide driver to work on Alpha.
1999-02-23 20:18:16 +00:00
fad6371a16
Update for recent changes in wssvar.h.
1999-02-23 09:14:05 +00:00
d6715660b7
- Introduce the first cut of faster wsdisplay_emulops exploiting SFB
...
accelerator potential. Need more work to finish replacing rcons.
Premilinary tests were done with DECstation and TC Alpha.
1999-02-23 06:34:49 +00:00
71036465a5
In cy693_setup_channel(), setup timings for IOR too (they were left to 0,
...
which is a way too higth timing for some devices). Thanks to Ken Wellsch
for trying the multiple debug kernels until the problem was located.
1999-02-22 10:12:00 +00:00
71eb5693e6
Use DMAMODE_DEMAND.
1999-02-22 03:24:33 +00:00
10817df7f0
Oops; remove obsolete code.
1999-02-22 02:33:48 +00:00
bd575a4ff6
Add support for demand mode with auto-init.
1999-02-22 02:32:43 +00:00
529c6c50aa
Use DMAMODE_LOOPDEMAND. Tested on a CS4231 in a WSS clone.
1999-02-22 02:25:20 +00:00
7da867ec93
Use DMAMODE_LOOPDEMAND. Tested on a ViBRA16.
1999-02-22 02:16:40 +00:00
ea50d6f672
Use DMAMODE_LOOPDEMAND.
...
Fixes the audible glitches (due to FIFO underruns) when receiving network
packets on the Shark.
1999-02-22 01:57:33 +00:00
fc658e2d3e
Don't update the CORx registers unless they really have changed.
...
Also make console Tx handling wait until the Tx FIFO has drained and
the shift-register is empty before sending console characters.
1999-02-21 14:01:50 +00:00
b86f85e1cc
wdcwait is called initially without any device on my thinkpad.
...
This breaks the first WDCDEBUG_PRINT. Handle this case.
1999-02-21 02:07:52 +00:00
ed418e30a2
Only define WDCDEBUG if not already define (e.g. by kernel option)
1999-02-21 00:52:04 +00:00
37a9e5bb67
Only define WDCDEBUG if not already defined (e.g. by some kernel option)
1999-02-21 00:15:42 +00:00
99626f33a3
Only #define WDCDEBUG if it isn't already defined (e.g. by some options
...
in the kernel config file).
1999-02-20 23:47:52 +00:00
b81ad0de61
Fix the halt_input and halt_output routines to actually disable the channel,
...
not just the DMA FIFO. Fixes problems with sample misalignment.
1999-02-20 23:28:37 +00:00
5113c5b9c0
Move the bus reset up. This makes the VIA chipset work. From FreeBSD.
1999-02-20 23:26:16 +00:00
bd047d30a0
complete mapping table for pcvt fonts, make dual-font selection work
...
as intended
1999-02-20 18:27:53 +00:00
9ad8930d16
complete mapping tables a bit so that ASCII (ie vt100) art looks better
...
even without extra fonts loaded
1999-02-20 18:26:13 +00:00
cc294f2cc5
complete the font tables for the DEC special fonts; assign some codes
...
from the private Unicode area (0xe000 ff.) to stuff I didn't find in
the Unicode database
1999-02-20 18:20:02 +00:00
3a5b0d88ca
That #define splserial() really didn't want to be there...
1999-02-20 16:23:39 +00:00
ea05c3b739
Fix typo.
1999-02-20 07:07:07 +00:00
0ed9dc11d7
Delay serial port parameter changes until the Tx FIFO has emptied.
1999-02-20 00:27:29 +00:00
ab9ab83d05
Add ID for IBM 'PCMCIA Portable CD-ROM Drive'. We only have one of these and it
...
may be broken (it choked under Windows), but it at least now probes.
1999-02-19 21:49:43 +00:00
e54f78017e
This one needs <machine/bswap.h> too.
1999-02-19 20:58:51 +00:00
598b05da47
Regen.
1999-02-19 19:12:09 +00:00
d9c29083d4
Improve descriptions for DEC Ethernet chips.
1999-02-19 19:11:33 +00:00
35399992bb
Indicate whether the decive is full or half duplex at attach time.
1999-02-19 17:09:16 +00:00
1790450d8c
Fix structure names.
1999-02-19 16:59:36 +00:00
38803874bb
Translated Japanese comments.
1999-02-19 16:19:53 +00:00
4449a6ef39
Kill vestiges of isa_establish().
1999-02-19 16:15:06 +00:00
4822d3d0b0
Move IRQ setup into frontend. Need to move DRQ handling as well.
1999-02-19 16:10:44 +00:00
c6c74098d0
Don't try to use the MII routines for the internal PHY.
1999-02-19 14:57:00 +00:00
3f8a09bba4
Improve product descriptions, and add 3c905-FX and 3c980 Server Adapter
...
products.
1999-02-19 06:58:42 +00:00
7248c3be19
Improve card descriptions.
1999-02-19 06:57:56 +00:00
02df2bd5a5
Regen.
1999-02-19 06:56:53 +00:00
1128dd593e
Improve the descriptions of 3Com Ethernet cards, and add the 3c905B-FX
...
and 3c980 Server Adapter products.
1999-02-19 06:55:15 +00:00
3a63b5db2a
Regen.
1999-02-19 05:53:36 +00:00
f43c45889a
Add several Tulip clone chips.
1999-02-19 05:53:00 +00:00
c07be2882b
- Make sure SFB ROP register initialized with value 3.
...
- Turn off video signal during hardware initialization.
1999-02-19 03:42:42 +00:00
28bc4dfeca
Oops; PCIC_INTR_ENABLE does something *very* different.
1999-02-19 03:14:00 +00:00
58d4d7e933
Regen.
1999-02-19 02:53:06 +00:00
6b150eb8f6
Fix typo.
...
XXX fix Makefile.pcmciadevs to catch this sort of thing.
1999-02-19 02:52:17 +00:00
bd4cd051b9
This is an utterly revolting hack to work around the previously mentioned
...
lossage. On the Alpha, we force the buffers to be allocated through the SGMAP
so that the PCI bus addresses are low enough.
At least it's only one line of code...
1999-02-19 02:27:59 +00:00
6e788dfcb5
Regen.
1999-02-19 00:44:15 +00:00
3300c6ba4b
Add Fujitsu SCSI 600 card
1999-02-19 00:43:00 +00:00
70d4ac07b6
Yet another path where we need to set PCIC_INTR_ENABLE.
1999-02-19 00:27:45 +00:00
f2c4e7f8bd
Use the correct interrupt sharing type, and set PCIC_INTR_ENABLE(!).
1999-02-18 23:41:40 +00:00
74028ea9fd
Regen.
1999-02-18 22:32:27 +00:00
b71baddba7
Add ID for MagicRam SwapBox PCMCIA controller card.
1999-02-18 22:31:32 +00:00
a473ed5477
Fix omission in previous.
1999-02-18 19:24:39 +00:00
18e341a954
Add separate halt_input and halt_output methods in ad1848_isa, which disable
...
the DMA channel.
1999-02-18 17:27:39 +00:00
9907eda026
spaces -> tabs
1999-02-18 16:09:01 +00:00
81bc49921a
Remove some superfluous softc elements.
1999-02-18 15:47:29 +00:00
7e5acb7709
Don't print an extra newline if the controller doesn't support 32 bits access.
...
Pointed out by Dave Huang.
1999-02-18 14:45:31 +00:00
e96144a012
Add a missing ':'. pointed out by Dave Huang.
1999-02-18 14:44:34 +00:00
699a815751
Pass the correct address (PCI bus address, not PA) to the card.
...
Also fix some typos and add more debugging printf()s.
This would work on the Alpha, but the card I have appears to have the upper
address bits chopped off, and the ring buffer gets mapped using the DGMAP,
which uses the upper bits. Boom.
1999-02-18 09:22:17 +00:00
e0b748e50c
Pass the correct address (PCI bus address, not PA) to the card.
...
Works on an Alpha now.
1999-02-18 07:59:30 +00:00
5e2fc07a14
Add separate halt_output and halt_input routines.
1999-02-18 07:08:35 +00:00
c02bf3c4d7
Minor code munging.
1999-02-18 05:46:38 +00:00
cfb2342145
Fix the code in epic_attach() that frees resources when the attach fails.
1999-02-18 02:24:30 +00:00
5c457e71fe
Only do the multicast filter bug work-around if in 10Mbps mode. Also,
...
don't reset the interface if the multicast list changes. Just reprogram
the multicast hash table.
1999-02-18 02:12:09 +00:00
982603ce5b
Don't reset the interface when the media changes.
1999-02-18 01:24:29 +00:00
78e18b8d8c
Back out to the previous stable revision of the fxp driver. The latest
...
one had too many stability problems.
1999-02-18 01:23:41 +00:00
6ce15ae4e3
spaces -> tabs
1999-02-18 00:55:36 +00:00
f1e84a4ec5
A few things:
...
* Use the trigger interface.
* Permit different encodings for record and playback.
* Set AUDIO_PROP_INDEPENDENT.
* Fix the mmap(2) hole again.
* Use 16-bit mode for a-law and u-law playback.
1999-02-18 00:54:19 +00:00
8b7b7cccc7
Fix a silly type.
1999-02-17 23:55:18 +00:00
27963c294a
Use the trigger interface, and clean up a pile of cruft.
1999-02-17 23:05:28 +00:00
71105fbda7
Update comments.
1999-02-17 21:44:55 +00:00
6d0cb6e410
Change a straggling splimp -> splnet.
1999-02-17 09:11:29 +00:00
69a4436f8b
Avoid initializing the interface in the SIOCSIFFLAGS if ! UP and ! RUNNING.
1999-02-17 03:40:59 +00:00
7741cae143
Fix slight ommission in previous.
1999-02-17 02:43:13 +00:00
e5f5e628d2
Pass the direction to the allocm and round_buffersize methods.
...
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
88ad3aa42b
If we have an 8-bit DRQ, always pass that to isa_malloc().
1999-02-17 01:22:47 +00:00
2c7fa23c38
Fix Copyright dates
1999-02-16 23:34:10 +00:00
dc068e0d1f
Assign my files to The NetBSD Foundation, Inc.
1999-02-16 22:46:55 +00:00
2ccd5cde74
Correctly compute PIO/DMA mode for sis and acer chips when the drive support
...
a DMA mode with higther capabilities than PIO mode.
1999-02-16 18:11:52 +00:00
d683e62685
Be less strict on ATAPI signature, at last one CD puts 0x00 in sc instead
...
of 0x01.
1999-02-15 18:47:59 +00:00
13e811e874
Revert to 1.23, this was not supposed to be checked in yet.
1999-02-15 18:43:08 +00:00
18496766b2
For CDIOCCLOSE, ignore media changes, as some drive seems to return this
...
info here.
1999-02-15 18:41:04 +00:00
379429d4df
If the REQUEST_SENSE command fails, issue a reset instead of XS_DRIVER_STUFFUP.
...
If REQUEST_SENSE succeeds but doens't return any data, return XS_SHORTSENSE
as the sense field will just contain a copy or the error register.
1999-02-15 18:40:01 +00:00
56f2d188fc
RCS ID police
1999-02-15 04:54:34 +00:00
fd9002550c
Make the reset even longer do cater for really bad devices.
1999-02-15 00:32:16 +00:00
210b267f84
Regen from pcidevs.
1999-02-14 22:44:36 +00:00
acb24b6080
Add 3Dfx's Voodoo II. Fixes PR kern/7000 by Brett Lymn.
1999-02-14 22:38:18 +00:00
e523f4968b
Make sure full-duplex is reflected in TXCON, and don't reset the interface
...
when the media changes.
1999-02-13 21:08:08 +00:00
4d5a04afc4
MI version of the Fujitsu MB89352 SCSI Protocol Controler (SPC) driver.
...
Based on experimental NetBSD/pc98 ISA/PISA version, which was derived
from the MD /sys/arch/x68k/dev/spc.c.
1999-02-13 17:33:14 +00:00
94719c7b9a
New MI front-end for the Cirrus Logic CD240[01] Multi-protocol
...
Communications Controller.
This is still a work in progress, but it is functional enough to
be usable.
1999-02-13 17:05:19 +00:00
70b91539e9
Restructure the interrupt handler and 1-second timer a bit, and tidy up
...
the lazy-transmit-interrupt logic, fixing a few minor logic problems.
Now unable to reproduce the lockup problem described in PR #6767 . Changing
PR's state to "feedback".
1999-02-13 02:12:59 +00:00
960dfa5227
oops - forgot to convert the trivial case (ASCII) to "match levels"
1999-02-12 15:49:43 +00:00
525932e022
make the probe stricter to catch cases where the chipset doesn't pull
...
the data lines to "high" for not-existant devices
1999-02-12 12:45:48 +00:00
b515442160
Display the danish o-slash as phi/Theta as proposed by
...
Soren S. Jorvang <soren@t.dk>, with a lower match level.
Display the other accented characters which are not present in the IBM
character set by their non-accented equivalents, with an even lower
match level.
1999-02-12 11:32:50 +00:00
dbdaf91650
change the "mapchar" interface to return a "quality" or "match level"
...
arguments which allows to find approximations for characters which are
not present in a font
1999-02-12 11:25:23 +00:00
2414f4ac80
"NEXT" is a keyboard type, not a keymap variation.
1999-02-12 11:14:49 +00:00
e8823cc3f3
Cleanup of the EPIC/100 driver I did while hacking on the Rhine driver:
...
* Macroize hardware and software descriptor access (much easier to read).
* Simplify and optimize the transmit loop a bit, and use IFF_OACTIVE as
appropriate.
* Fix a potential race condition in the transmit loop. This change has
made the driver significantly more stable (almost completely eliminated
the "device timeout" errors that have plagued this driver).
* Implement transmit interrupt pacing.
* Add missing bus_dmamap_sync() calls (on transmit and receive descriptors
and fraglists). (Draining the write buffer when accessing these structures
may have also contributed to the increased stability of this driver on
the Alpha.)
1999-02-12 05:55:27 +00:00
873e1d2a51
Fix printf format problems on Alpha.
1999-02-12 01:51:37 +00:00
1ab6db8e5f
Fix printf format problems on Alpha.
1999-02-12 00:50:09 +00:00
94962b67c7
Fix some printf format problems on Alpha.
1999-02-12 00:46:11 +00:00
f83663b7ba
Garbage-collect some unneeded definitions.
1999-02-12 00:37:07 +00:00
7b516b31bd
Major overhaul of the Rhine/Rhine-II driver, structuring it a little more
...
like the SMC83C100 EPIC/100 driver:
* Rather than using pointers to the head and tail of the transmit and
receive rings, use wrapping indexes into arrays. This is a little more
obvious when reading the code.
* More cleanly separate the hardware descriptor from the software descriptor.
* bus_dma it everywhere.
* Implement interrupt pacing and avoid a potential race in the transmit
loop.
Now this looks more or less like the Rhine driver I was working on when
this driver was committed :-) Update copyright notice to reflect that.
1999-02-12 00:36:48 +00:00
6d72c8f0e7
Minor cleanups that got missed last time through.
1999-02-11 01:23:32 +00:00
c5847e98a9
void* -> u_int32_t
1999-02-10 16:00:54 +00:00
6dd47fe65f
Abort transfer if b_blkno is negative. Closes PR kern/5553 by Johan Danielsson.
1999-02-10 12:29:50 +00:00
0b4e481612
add "mii" to vr driver.
1999-02-09 02:04:36 +00:00
1a911bb798
roll internal release level
1999-02-09 00:54:07 +00:00
3c21a2493b
Roll internal release tag. Print out if we're in a 64 bit PCI slot.
...
Use fast memory timing NVRAM parameter. Clean up and fix establishment
of default target parameters. Don't use NVRAM if are flagged as not to
do so (I had a busted NVRAM setup which I couldn't edit that enabled SYNC
mode but disabled disconnect/reconnect and wide!!). Fix delays after
resets. BUS resets not done in isp_init anymore- relegated to OS
specific outer layers. Fix a buglet where you can get in a loop for
a NULL xs in the completion list in isp_intr. Add in some defines that
can disable fast posting. Add in code for Loop Up/Loop Down events that
call into the outer layers as to what to do.
1999-02-09 00:52:23 +00:00
0cf98e4e12
Roll internal release tag. Roll core version minor. Fix broken DPARM_DEFAULT
...
define. Add a new config flag param (ISP_CFG_NONVRAM) whose intent it is
to cause NVRAM to be ignored. Add ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP
isp_async enums.
1999-02-09 00:46:25 +00:00
d8d9458410
fix a couple of NVRAM defines
1999-02-09 00:44:42 +00:00
c1adc949c2
roll internal release tag
1999-02-09 00:44:06 +00:00
6a8ebccd6a
Do SCSI Bus resets in this layer (now). Don't do it for Fibre Channel yet
...
(we get LOOP DOWN events, and we'll hang on that at this time).
Add other isp_async cases- ISPASYNC_LOOP_DOWN and ISPASYNC_LOOP_UP. DOWN
will cause internal queuing until UP, whereupon a timeout will fire up
any pending xfers. It doesn't really keep commands from getting destroyed
by loop down events, but at least minimizes the damage. This was much
easier to implement with CAM.
1999-02-09 00:42:22 +00:00
ee45547dde
Roll platform revision level. Add blocked flag and waitq to osinfo structure.
1999-02-09 00:37:35 +00:00
c47d6855db
clean up pci configuration a bit
1999-02-09 00:35:35 +00:00
e8690f9bd1
Fix ESS/SB confusion for 1868 and 1869 chips: because isapnpdevs is parsed by an awk script, you *must* comment out each line separately, which is why ess was still trying to attach chips it couldn't cope with. Note that this leaves isapnp ess with no matches -- shouldn't the 188X be in here? Also, add another isapnp PCIC.
1999-02-08 22:10:09 +00:00
f6f9f8a965
Change DIOCEJECT to do what's needed to eject a device before the eject
...
command (unlock for sd and cd) if no other partitions are open, return
EBUSY otherwise. DIOCEJECT will have the old semantic if its argument is not
0. The old ioctl has been renamed to ODIOCEJECT for binary compatibility.
1999-02-08 16:33:16 +00:00
1e0e78854a
There's no ATA draft where it is required for the drive to set DRDY | DSC when
...
the disk is ready to transfer data, and in ATA-5 the DSC has been obsoleted.
So only wait for DRQ to transfer data. This can be made conditional on the
ATA version if it's proven to break with some drives (worked with all the
drives I have access to).
While I'm there correct a few typos.
1999-02-08 15:22:28 +00:00
999d27da77
Don't bother copying output queue into automatic buffer; instead, pass
...
contiguous chunk of outq to emulation routine. Fix based on patch
from M. Drochner, modified to call output routine once with each
contiguous chunk when the ring buffer wraps around.
1999-02-08 14:48:07 +00:00
95ee03319d
Change WSDISPLAYBURST from OBUFSIZ-1 to OBUFSIZ*4, for a ~15x
...
improvement in the "cat /usr/share/misc/termcap" benchmark on 486/75
ttwrite queues data for us in OBUFSIZ chunks. If we only consume
OBUFSIZ-1 bytes per call to wsdisplaystart(), we're *guaranteed* to
fall behind when given maximum-sized reads (which will defer
processing the leftovers until ttrstrt gets called, after a timeout)
Note that OBUFSIZ*4 may be overkill; OBUFSIZ*3 may be sufficient to
get maximal performance; OBUFSIZ*2 resulted in only about a 2.5x
performance improvement, but it's 2am and I've done enough tweaking
for the night.
1999-02-08 07:05:51 +00:00
0d3a9dfce7
Don't bring scsi/atapi common files in under the "atapi" attribute.
...
Bring them in under atapibus since they're not needed unless something
attached to an atapibus is also attached.
Tested on i386 and arm32.
1999-02-07 22:58:43 +00:00
c9d036d796
defopt MEMORY_DISK_{HOOKS,SERVER,IS_ROOT}.
1999-02-07 09:34:58 +00:00
6eedee5c9d
Add entropy gathering.
1999-02-07 01:54:50 +00:00
6b77f11d67
put in better name/description for Simon G's board
1999-02-06 06:55:15 +00:00
04046c6dd7
add code to cope with multiple ports per BAR, as are found, for instance,
...
on the 8 port card Simon Gerraty has. In general, cards which have
this lots of ports also have a separate interrupt status register, but
this change is just to talk to the various ports independently. It works,
but it's not optimal. (XXX still need a good name for the card in the
comments, and to update the manual page.)
1999-02-06 06:29:54 +00:00
23382bdfcb
Regen.
1999-02-05 22:55:40 +00:00
0955479f29
Add some Olicom Ethernet device IDs, from FreeBSD's tl driver.
1999-02-05 22:55:19 +00:00
d95d5b1488
Make this driver work on the Alpha. Apparently the receive DMA mechanism
...
has the same 4-byte alignment requirement that the transmit side does. This
causes the packet payload to be misaligned. So, on systems which require
strict alignment, we must copy the incoming frame to a new packet buffer,
suitably aligned.
1999-02-05 22:09:46 +00:00
b52d1e44d0
Fix the interrupt handler to actually acknowledge the interupt to the
...
dispatch code (!!!). How did this work even on the i386 before?
1999-02-05 21:20:31 +00:00
58beb19c16
Regen.
1999-02-05 20:20:04 +00:00
53089c1ade
Add oui for Davicom Semiconductor, and add Davicom DM9101 10/100 PHY.
1999-02-05 20:19:44 +00:00
dde3694c4c
Fix some formatting nits.
1999-02-05 08:42:03 +00:00
82a54250be
Remove some duplicate softc members, and comment some of the softc
...
fields.
1999-02-05 08:27:46 +00:00
8bf66d3eb2
Remove some unnecessary splnet's.
1999-02-05 08:21:31 +00:00
50faf19d7d
splimp -> splnet
1999-02-05 07:53:24 +00:00
adc9c40688
Use the generic MII support code, not our own.
1999-02-05 02:58:38 +00:00
f9467ddb8e
Some PHYs are really braindead, and report incorrect IDs. Simplify the
...
test for this, and probe for PHYs based on media in the BMSR.
1999-02-05 02:46:34 +00:00
ebf3a97519
Use MII command opcodes from <sys/dev/mii.h>
1999-02-05 01:17:24 +00:00
eade8dcad9
Don't use ess driver for ESS186[89], it doesn't work.
1999-02-05 01:15:01 +00:00
909b90d2d4
Rename VR_MIICMD_DATAIN and VR_MIICMD_DATAOUT to actually match what the
...
data sheet says. (The names and their usage were exactly reversed in the
code.)
1999-02-05 01:10:30 +00:00
ad