due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
just for reference purposes.
This commit includes 1.4 -> 1.4.1 sync for kame branch.
The branch does not compile at all (due to the lack of ALTQ and some other
source code). Please do not try to modify the branch, this is just for
referenre purposes.
synchronization to latest KAME will take place on HEAD branch soon.
RTM_IFINFO is now 0xf, 0xe is RTM_OIFINFO which returns the old (if_msghdr14)
struct with 32bit counters (binary compat, conditioned on COMPAT_14).
Same for sysctl: node 3 is renamed NET_RT_OIFLIST, NET_RT_IFLIST is now node 4.
Change rt_msg1() to add an mbuf to the mbuf chain instead of just panic()
when the message is larger than MHLEN.
deal correctly with more than 32767 routes out an interface.
Should close PR 7148 regarding problems when ifs_refcnt overflows.
Bump kernel version from 1.4L to 1.4M.
stack-allocate a sockaddr_storage for the temporary sockaddr rather
than putting it in an mbuf.
neighbor discovery wants to delete expired ifa's from a timeout
handler. allowing rtinit(RTM_DELETE, ...) to run at interrupt level
allows this to work.
i think we can afford the extra ~128 bytes of stack depth ..
This is important, because for most protocols, link level fragmentation is
used, but with different default effective MTUs. (e.g.: IPv4 default MTU
is 1500 octets, IPv6 default MTU is 9072 octets).
This situation happens on severe memory shortage. We may need more
improvements here and there.
- Grab IEEE802 address from IFT_ETHER card, even if the card is
inserted after bootup time. Is there any other card that can be
inserted afterwards? pcmcia fddi card? :-P
- RFC2373 u bit handling suggests that we SHOULD NOT copy interface id from
ethernet card to pseudo interface, when ethernet card has IEEE802/EUI64
with u bit != 0 (this means that IEEE802/EUI64 is not universally unique).
Do not use such address as, for example, interface id for gif interface.
(I have such an ethernet card myself)
This may change interface id for your gif interface. be careful upgrading
rc files.
(sync with recent KAME)
Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)
Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
again when switching link0 on.
XXX This stuff needs to be thought about, especially with the doomming IPv6
support, which uses yet another default mtu.
which can't be handled by netmask, and ifa_ifwithnet() didn't find the
interface associated with an adress if it was in the same block but not with
the same prefix. This prevented 'route add' and atalkd to work properly
with some network configs.
This has been discussed on tech-net some weeks ago.
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
after various m_adj()s have been done. Kludge around this with a cheesy
macro that knows where the drivers put the mac header in the first mbuf.
XXX There should be a better way to do this.
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
and "pass-filter" and "inbound" and "outbound" qualifiers in the filter
expression, use new "active-filter-in", "active-filter-out", "pass-filter-in",
and "pass-filter-out" without these qualifiers.
This is necessary due to the horrible, awful way "inbound" and "outbound"
were specified for the filter programs when a packet was passed through them.
Basically, the "address" byte in the serial PPP header was overwritten with
a value to indicate the direction. However, the "address" byte doesn't even
exist on PPP headers for all other PPP encaps! So, this old method worked
only for serial encaps, and corrupted packets for all others (PPPoE, ATM, etc.)
to serial encap, change its data link type to DLT_PPP_SERIAL.
* Work around some serious bogosity in the filtering code which utterly
breaks proper functioning of BPF. The PPP code and pppd(8) WILL be changed
to fix this.
select the current medium, (and it is not autoselect), assume no change and
do not try to select the medium. Fixes 'ifconfig le0 medium 10base5' on sparc2
without requiring a 'do nothing' mediachange callback.
and netinet, currently only tested under netinet.
Disabled by default, enabled by compiling the kernel with option
IFA_STATS. Enabling this feature seems to make the ip_output function
take 13% longer than before, which should be OK for people that need
this feature.
- ETHER_ADDR_LEN: length of Ethernet address (actually, we already defined
this).
- ETHER_TYPE_LEN: length of the Ethernet header `type' field.
- ETHER_CRC_LEN: length of the Ethernet CRC (explorer got this already, mostly
because I forgot to commit these changes earlier).
- ETHER_HDR_LEN: total length of the Ethernet header
- ETHER_MAX_LEN: maximum length of an Ethernet frame, including header and CRC
- ETHER_MIN_LEN: minimum length of an Ethernet frame, including header and CRC
Define ETHERMTU and ETHERMIN (payload sizes) in terms of the above constants.
this fixed in the figures (but still not in the text); anyway, the intention
of the ATA is that this is identical to the PHDS specification.
Remove the ...EXC_8782 constant, and change the _EXC_1201 constant to be
a simple ...EXC.
above only; since this is the only occurence, fix it locally rather than in
<sys/cdefs.h> as to not remove all the functionality on pre-2.8 systems.
XXX Shouldn't use zero-length arrays at all.
After booting a current kernel and receiving a few arp requests on the
network it panics (data modified on free list). The panic message is wrong,
as code inspection shows the memory pool for routing entries is intialized
twice, while the routing timer memory pool is never initialized.
table. These are actually subtype+option combos, but these are the
strings displayed by the MII code to indicate 10Mbps full-duplex and
100Mbps full-duplex respectively, and it's Nice that ifconfig(8) can
grok them.
Our other constants also use "ATALK".
Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
fix last two fixes one more time, this time dealing with ugly
prototype issues, including the fact that the bcopy returns nothing,
but memcpy returns a void *. Never mind that we don't use it...
This was semi-nontrivial, since a function pointer to bcopy gets used
in this file.
Note #1: The catchpacket routine, which takes a function pointer to
bpf_mcpy or memcpy, should probably be converted to take a
flag that just says which is used, so memcpy can be inlined.
Note #2: The code is heavily #ifdef'ed to run on older operating
systems. We probably want to clean that cruft out, unless
someone is planning a new release of the code at LBL (doubtful.)
itojun