Add some paragraph breaks to make the man page more readable.
Add the history of the talkd -> ntalkd change as I recall it to
the HISTORY section. All of this to answer PR 13433
and without Kerberos 4 & 5 (MKKERBEROS=no). Previously checkflist
complained of missing files.
* move kerberos- and kerberos 4-only files into new flists,
distrib/sets/lists/*/krb.*
* make the flist generators grok MKKERBEROS{,4} variables
* fix Makefiles which treat MKKERBEROS=no as MKKERBEROS5=no.
9 out of 10 experts agree that it is ludicrous to build w/
KERBEROS4 and w/o KERBEROS5.
* fix header files, also, which treat MKKERBEROS=no as MKKERBEROS5=no.
* omit some Kerberos-only subdirectories from the build as
MKKERBEROS{,4} indicate
(I acknowledge the sentiment that flists are the wrong way to go,
and that the makefiles should produce the metalog directly. That
sounds to me like the right way to go, but I am not prepared to do
revamp all the makefiles. While my approach is expedient, it fits
painlessly within the current build architecture until we are
delivered from flist purgatory, and it does not postpone our
delivery. Fair enough?)
to a 2-clause licence (retaining UCB clauses (1) and (2)), per PR
22409 from Joel Baker, approved by Theo de Raadt, and ratified by
myself - the only discrepancy being the handling of the original
clause 3 in src/usr.sbin/yppoll/yppoll.c.
before referencing object's DAG. This makes it possible for
C++ exceptions to work across shared libraries.
Patch taken from FreeBSD: src/libexec/rtld-elf/rtld.c: 1.67 -> 1.68,
committed there by kan@FreeBSD.org.
* Rename "config.h" to "nbtool_config.h" and
HAVE_CONFIG_H to HAVE_NBTOOL_CONFIG_H.
This makes in more obvious in the source when we're using
tools/compat/config.h versus "standard autoconf" config.h
* Consistently move the inclusion of nbtool_config.h to before
<sys/cdefs.h> so that the former can provide __RCSID() (et al),
and there's no need to protect those macros any more.
These changes should make it easier to "tool-ify" a program by adding:
#if HAVE_NBTOOL_CONFIG_H
#include "nbtool_config.h"
#endif
to the top of the source files (for the general case).
* Don't bother prefixing commands with a line of ${_MKCMD}\
and instead rely upon "make -s". This is less intrusive on
all the Makefiles than the former. Idea from David Laight.
* Rename the variables use to print messages. The scheme now is:
_MKMSG_FOO Run _MKMSG 'foo'
_MKTARGET_FOO Run _MKMSG_FOO ${.TARGET}
From discussion with Alistair Crooks.
removing the advertising clause. Diffs provided in PR 22410 by Joel
Baker, confirmed to the board by Jason Downs.
With additional thanks to Jason Thorpe.
Previously dlsym resolved to the version in crt0.o or libc which would
mean that the caller's shared object couldn't be determined correctly
using __builtin_return_address(0).
Mainly from FreeBSD, but adapted by me. Benefits of this solutions are:
- backward comptibility maintained
- existing broken binaries are fixed with a new ld.elf_so
- __mainprog_obj can be removed from crt0.o
- we do the same thing as FreeBSD
Fixes PR 22067.
OKed by Jason and Christos.
quite a bit of time, make telnetd ignore it completely now. This results
in the :if=: entry in the default gettytab entry to honored instead of
being ignored. The -h option to telnetd will continue to suppress the
inclusion of :if=:
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
will not prompt for a login name, and will not pass one along to the
login program. This can be used to accomodate login programs that have
an alternate way of selecting the user to log in.
any more -- this drastically slows delivery because the next queue run
might be an hour away.
Pointed out by Takahiro Yugawa PR bin/21018
He suggested changing to -odi, but I've changed to -odb (background
delivery) instead.
I've left an #ifdef QUEUE_ONLY for those who would like to build the
old way, but I'm not expecting any. I've also heavily commented this
line of code to explain the issues to anyone reading it later on.
I would have made this a run time command line flag, but it isn't like
you can change rmail's arguments given the uucp architecture, and
besides, UUCP is mostly dead...
64 bit block pointers, extended attribute storage, and a few
other things.
This commit does not yet include the code to manipulate the extended
storage (for e.g. ACLs), this will be done later.
Originally written by Kirk McKusick and Network Associates Laboratories for
FreeBSD.
With the latest SuperH toolchain, NetBSD/evbsh5 can now
run with a fully dynamic userland (modulo a few remaining
gremlins affecting a couple of binaries).
the beginning of the GOT, so we don't need an extra one here. Also, remove a
bogus comment -- we do in fact have to do fixups, because there are pointers in
ld.elf_so's data segment that need to be relocated.
first entry, which is a special case) in rtld_start, because they could be
all 0s. Instead we use the difference between the real _DYNAMIC address
(which we can determine on 68k with a "lea (%pc,_DYNAMIC),..." and the
base-relative one (at the beginning of the GOT) to figure out the relocation
offset.
Not needed for binutils-current, but I might as well fix it now.
disassembling a call to _DYNAMIC to determine its real address, and using the
first entry of the GOT as its base-relative address.
It's evil, but it works.
calls pututxline() with ruid = 0, euid = current-ftp-user. This ends
up calling update_utmp:
- if the real uid is root, don't do password or tty ownership checks
- if we cannot open the tty line, assume that it is a daemon that does
not use ttys and allow it to change a live entry to a dead one if
indeed it is the same process that created the entry.
ftpd_login(), ftpd_logout() and ftpd_logwtmp() respectively.
(makes utmp support much easier in tnftpd).
per suggestion in mail from Mike Heffner <mheffner@vt.edu>, who
forwarded patch from Michael Ranner <mranner@inode.at>.
(there are still some details to work out) but expect that to go
away soon. To support these basic changes (creation of lfs_putpages,
lfs_gop_write, mods to lfs_balloc) several other changes were made, to
wit:
* Create a writer daemon kernel thread whose purpose is to handle page
writes for the pagedaemon, but which also takes over some of the
functions of lfs_check(). This thread is started the first time an
LFS is mounted.
* Add a "flags" parameter to GOP_SIZE. Current values are
GOP_SIZE_READ, meaning that the call should return the size of the
in-core version of the file, and GOP_SIZE_WRITE, meaning that it
should return the on-disk size. One of GOP_SIZE_READ or
GOP_SIZE_WRITE must be specified.
* Instead of using malloc(...M_WAITOK) for everything, reserve enough
resources to get by and use malloc(...M_NOWAIT), using the reserves if
necessary. Use the pool subsystem for structures small enough that
this is feasible. This also obsoletes LFS_THROTTLE.
And a few that are not strictly necessary:
* Moves the LFS inode extensions off onto a separately allocated
structure; getting closer to LFS as an LKM. "Welcome to 1.6O."
* Unified GOP_ALLOC between FFS and LFS.
* Update LFS copyright headers to correct values.
* Actually cast to unsigned in lfs_shellsort, like the comment says.
* Keep track of which segments were empty before the previous
checkpoint; any segments that pass two checkpoints both dirty and
empty can be summarily cleaned. Do this. Right now lfs_segclean
still works, but this should be turned into an effectless
compatibility syscall.
on <security@freebsd.org>, and subsequently in FreeBSD's cvs repository
as libexec/ftpd/ftpd.c rev 1.133:
The FTP daemon was vulnerable to a DoS where an attacker could bind()
up port 20 for an extended period of time and thus lock out all other
users from establishing PORT data connections. Don't hold on to the
bind() while we loop around waiting to see if we can make our
connection.
Bump version to 20030122.
PLT entries are 12 bytes. Add a #define for that and replace the
explicit values with the PLT_ENTRY_SIZE. This bug can cause random
SIGILL signals to happen.
without search permission. This confused some ftp clients.
We fix this problem by maitaining a cached path when getcwd() does not work.
The symbolic links and ../ are resolved in the cached path, and it is finnally
checked for accuracy by comparing ./ and the cached path with stat (device
and inode comparison). If the comparison fails, pwd fails as it did before,
and if the comparison succeeds, the cached path is displayed.
If paths are too long, we should just compare ./ with a truncated path and
fail, thus making pwd displaying an error as it did before.
strcmp() by performing path name length comparison first. In the test
with Mozilla, the number was reduced to 1068 from 7182 (yes, we saved
6114 strcmp()!).
- use LLT (aka 'long long type') for all numeric class parameters
- improve description of various ftpd.conf(5) options
- statcmd(): print out: mmapsize readsize writesize sendbufsize sendlowat
than -0x20000000, not -0x1f000000. Quells the endless stream
of
ld: Double word displacement -535682276, out of range
style warnings that have annoyed my once too often.
This version is now RFC 959 compliant, using a patch adapted from one
sent in by david.leonard@eecs.uq.edu.au
openbsd libexec/ftpd/ftpd.c revision 1.69.
(see RFC959 page 36)
skrll