from proc_trampoline to match the other ports).
A DIAGNOSTIC kernel will now boot and run. LOCKDEBUG still doesn't work yet.
Also, my amiga no longer loses time.
an SR value or an IPL_* constant).
- Take advange of the smaller ipl_cookie_t to shrink kmutex_t from
16 bytes to 8 bytes by overlapping storage where possible.
- Implement a RAS-based _lock_cas() for mc68010 systems (Sun2). See
sun68k/sun68k/isr.c.
Tested on various m68k platforms, but NOT Sun2. In any case, at least
Sun2 compiles now.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
version.
Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().
dumpdev. this occurs when we try to set the dumpdev to a device
with no driver loaded. this fixes PR#34872.
in sys_swapctl, if bdevsw_lookup() fails, set dumpdev = NODEV
before calling cpu_dumpconf(). (this also fixes PR#34872.)
XXX: cpu_dumpconf() should probably be changed to take a dumpdev
XXX: and return an error in such cases, but that is a much more
XXX: intrusive change.
XXX2: this is only run-tested on sparc64 and compile tested on a
XXX2: couple of platforms.
ones and those for specific machines of developers. PR 32304.
OK'ed by rpaulo.
N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".
- use vmspace rather than proc or lwp where appropriate.
the latter is more natural to specify an address space.
(and less likely to be abused for random purposes.)
- fix a swdmover race.
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.
The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.
Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.
OK'ed by my project mentor, William Studenmund (wrstuden@).
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.
Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.
-Wcast-qual differently, by instead changing the signatore of those
"functions" to take a "volatile struct timeval*" instead of a
"struct timeval*". Many places, these functions are called with
&time, and time is declared as volatile in <sys/kernel.h>. This
way we can get rid of all the ugly casts which now also triggered
warnings, and caused more code to be added to work around the
problem.
Reviewed by thorpej.
where the printing of `version' is already performed.
This has the benefit of allowing the copyright to be available
via dmesg(8) on platforms which need the `msgbuf' to be setup
in cpu_startup() before printed output is remembered.
- don't use managed mappings/backing objects for wired memory allocations.
save some resources like pv_entry. also fix (most of) PR/27030.
- simplify kernel memory management API.
- simplify pmap bootstrap of some ports.
- some related cleanups.
to select the maximum segment size for each bus_dmamap_load (up to the maxsegsz
supplied to bus_dmamap_create). dm_maxsegsz is reset to the value supplied to
bus_dmamap_create when the dmamap is unloaded.
- they shouldn't be needed with the current fault handler.
- they causes assertion failure with the recent vm_map implementation.
discussed on tech-kern@. reviewed by Chuck Silvers.
PR/29179 from Julio M. Merino Vidal.
- Ffs internal snapshots get compiled in unconditionally.
- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.
Reviewed by: Jason Thorpe <thorpej@netbsd.org>
- move per VP data into struct sadata_vp referenced from l->l_savp
* VP id
* lock on VP data
* LWP on VP
* recently blocked LWP on VP
* queue of LWPs woken which ran on this VP before sleep
* faultaddr
* LWP cache for upcalls
* upcall queue
- add current concurrency and requested concurrency variables
- make process exit run LWP on all VPs
- make signal delivery consider all VPs
- make timer events consider all VPs
- add sa_newsavp to allocate new sadata_vp structure
- add sa_increaseconcurrency to prepare new VP
- make sys_sa_setconcurrency request new VP or wakeup idle VP
- make sa_yield lower current concurrency
- set sa_cpu = VP id in upcalls
- maintain cached LWPs per VP
the recently introduced files.ppbus.
Also, let the mvme68k port use it's own lpt implementation for now,
so define USE_ALT_LPT option in std.memv68k.
This makes the mvme68k kernels configure and build again.
process context ('reaper').
From within the exiting process context:
* deactivate pmap and free vmspace while we can still block
* introduce MD cpu_lwp_free() - this cleans all MD-specific context (such
as FPU state), and is the last potentially blocking operation;
all of cpu_wait(), and most of cpu_exit(), is now folded into cpu_lwp_free()
* process is now immediatelly marked as zombie and made available for pickup
by parent; the remaining last lwp continues the exit as fully detached
* MI (rather than MD) code bumps uvmexp.swtch, cpu_exit() is now same
for both 'process' and 'lwp' exit
uvm_lwp_exit() is modified to never block; the u-area memory is now
always just linked to the list of available u-areas. Introduce (blocking)
uvm_uarea_drain(), which is called to release the excessive u-area memory;
this is called by parent within wait4(), or by pagedaemon on memory shortage.
uvm_uarea_free() is now private function within uvm_glue.c.
MD process/lwp exit code now always calls lwp_exit2() immediatelly after
switching away from the exiting lwp.
g/c now unneeded routines and variables, including the reaper kernel thread
virtual memory reservation and a private pool of memory pages -- by a scheme
based on memory pools.
This allows better utilization of memory because buffers can now be allocated
with a granularity finer than the system's native page size (useful for
filesystems with e.g. 1k or 2k fragment sizes). It also avoids fragmentation
of virtual to physical memory mappings (due to the former fixed virtual
address reservation) resulting in better utilization of MMU resources on some
platforms. Finally, the scheme is more flexible by allowing run-time decisions
on the amount of memory to be used for buffers.
On the other hand, the effectiveness of the LRU queue for buffer recycling
may be somewhat reduced compared to the traditional method since, due to the
nature of the pool based memory allocation, the actual least recently used
buffer may release its memory to a pool different from the one needed by a
newly allocated buffer. However, this effect will kick in only if the
system is under memory pressure.
to a 2-clause licence (retaining UCB clauses (1) and (2)), per PR
22409 from Joel Baker, approved by Theo de Raadt, and ratified by
myself - the only discrepancy being the handling of the original
clause 3 in src/usr.sbin/yppoll/yppoll.c.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
Remove p_raslock and rename p_lwplock p_lock (one lock is enough).
Simplify window test when adding a ras and correct test on VM_MAXUSER_ADDRESS.
Avoid unpredictable branch in i386 locore.S
(pad fields left in struct proc to avoid kernel bump)
containing signal posting, kernel-exit handling and sa_upcall processing.
XXX the pc532, sparc, sparc64 and vax ports should have their
XXX userret() code rearranged to use this.
Right now the only flag is used to indicate if a ksiginfo_t is a
result of a trap. Add a predicate macro to test for this flag.
* Add initialization macros for ksiginfo_t's.
* Add accssor macro for ksi_trap. Expands to 0 if the ksiginfo_t was
not the result of a trap. This matches the sigcontext trapcode semantics.
* In kpsendsig(), use KSI_TRAP_P() to select the lwp that gets the signal.
Inspired by Matthias Drochner's fix to kpsendsig(), but correctly handles
the case of non-trap-generated signals that have a > 0 si_code.
This patch fixes a signal delivery problem with threaded programs noted by
Matthias Drochner on tech-kern.
As discussed on tech-kern. Reviewed and OK's by Christos.
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.
Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.
Follows recent discussion on tech-kern@
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
http://mail-index.netbsd.org/source-changes/2003/05/08/0068.html
There were some side-effects that I didn't anticipate, and fixing them
is proving to be more difficult than I thought, do just eject for now.
Maybe one day we can look at this again.
Fixes PR kern/21517.
space is advertised to UVM by making virtual_avail and virtual_end
first-class exported variables by UVM. Machine-dependent code is
responsible for initializing them before main() is called. Anything
that steals KVA must adjust these variables accordingly.
This reduces the number of instances of this info from 3 to 1, and
simplifies the pmap(9) interface by removing the pmap_virtual_space()
function call, and removing two arguments from pmap_steal_memory().
This also eliminates some kludges such as having to burn kernel_map
entries on space used by the kernel and stolen KVA.
This also eliminates use of VM_{MIN,MAX}_KERNEL_ADDRESS from MI code,
this giving MD code greater flexibility over the bounds of the managed
kernel virtual address space if a given port's specific platforms can
vary in this regard (this is especially true of the evb* ports).
cd ${KERNSRCDIR}/${KERNARCHDIR}/compile && ${PRINTOBJDIR}
This is far simpler than the previous system, and more robust with
objdirs built via BSDOBJDIR.
The previous method of finding KERNOBJDIR when using BSDOBJDIR by
referencing _SRC_TOP_OBJ_ from another directory was extremely
fragile due to the depth first tree walk by <bsd.subdir.mk>, and
the caching of _SRC_TOP_OBJ_ (with MAKEOVERRIDES) which would be
empty on the *first* pass to create fresh objdirs.
This change requires adding sys/arch/*/compile/Makefile to create
the objdir in that directory, and descending into arch/*/compile
from arch/*/Makefile. Remove the now-unnecessary .keep_me files
whilst here.
Per lengthy discussion with Andrew Brown.
kqueue provides a stateful and efficient event notification framework
currently supported events include socket, file, directory, fifo,
pipe, tty and device changes, and monitoring of processes and signals
kqueue is supported by all writable filesystems in NetBSD tree
(with exception of Coda) and all device drivers supporting poll(2)
based on work done by Jonathan Lemon for FreeBSD
initial NetBSD port done by Luke Mewburn and Jason Thorpe
clean up some other stuff along the way, including:
- use m68k/cacheops.*, remove duplicates from cpu.h.
- centralize a few declarations in (all the copies of) cpu.h.
- define M68K_VAC on platforms which have a VAC.
- switch the sun platforms to the (now common) proc_trampoline().
- do the phys_map thang on the sun platforms too, no reason not to.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.
pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.
be properly used by any misc. cloning device. While here, correct
a comment to indicate that "open" is the only entry point and that
everything else is handled with fileops.
- Switch all m68k-based ports over to __HAVE_SYSCALL_INTERN.
- Add systrace glue.
- Define struct mdproc in <m68k/proc.h> instead of <machine/proc.h>.
(They were all defined exactly the same anyway, other than a couple
of the MDP_* flags.)
into kernel_object where this was missing.
This is a no-op on ports where VM_MIN_KERNEL_ADDRESS==0, ie all but
cesfic.
Confirmed and corrected by Chuck Silvers.
mhitch