7575e3d5e9
Update comment regarding watchdog timer toggle.
2000-11-04 18:44:28 +00:00
c48d521bdb
Add a watchog timer framework to the system monitor.
2000-11-04 18:37:19 +00:00
cb5b106fe1
Interface definition for watchdog timers.
2000-11-04 18:33:33 +00:00
232ac6b3d1
Print the vendor and chip id in the DPRINTF with 0x%x and not just %d.
2000-11-04 18:28:19 +00:00
f3c38af11b
Regen.
2000-11-04 16:43:14 +00:00
601bcf9813
Add a couple NeoMagic products. From OpenBSD.
2000-11-04 16:41:57 +00:00
f3030960da
Add quirks for a Fuji camera.
2000-11-04 15:54:36 +00:00
87ebc281b2
Print which IRQ is used for compatibility interrupts. (from i386)
2000-11-04 14:05:55 +00:00
05d5f37522
Shadow the AC'97 codec registers. This adds two capabilities:
...
* support devices that crash when reading the codec registers; a flags
interface is added to the host interface and one flag is defined
(AC97_HOST_DONT_READ).
* new API (restore_ports) for restoring the user's settings. This
can be useful after an APM resume after a suspend to disk.
From OpenBSD.
2000-11-04 08:07:14 +00:00
0bb6525f5b
Add some more codec IDs. From OpenBSD.
2000-11-04 05:45:57 +00:00
029bdd3185
Adjust to change in tty line discipline handling.
2000-11-03 18:50:49 +00:00
99fde8d00d
Call ttymalloc() to initialize struct tty in bmcnattach().
2000-11-03 18:26:32 +00:00
3d193b190b
- Pequr -> Serverworks. It pays to do a cvs update first...
...
- Pay attention only to the low byte of config reg 0x44 on Serverworks chips,
as Linux does.
- Compress duplicatated code.
2000-11-03 17:28:02 +00:00
96d994ecae
regen.
2000-11-03 16:31:51 +00:00
10885fbd47
Oops
2000-11-03 16:31:01 +00:00
62d4f894dc
Regen.
2000-11-03 15:57:33 +00:00
3789452cb3
Pequr Technology is now called ServerWorks.
2000-11-03 15:54:02 +00:00
dde480911e
Fix up line discipline change fallout.
2000-11-03 15:01:10 +00:00
3d213115f4
Don't match if nintr > 12 (more than 3 cells).
2000-11-03 12:26:06 +00:00
bcb05a2f55
Get 6 interrupt cells from OF.
2000-11-03 12:20:55 +00:00
8ba559d056
st_touch_tape(): Pass XS_CTL_SILENT to st_mode_select().
2000-11-03 12:08:41 +00:00
4c7351ec7d
* st_touch_tape(): start probing at the block size from the sense data if
...
we have it.
* st_unmount(): reset density to the device default. This prevents using
stale density values after changing to a medium with different density.
Section 9.3.3 of the SCSI specs states that a device shall return the
density value specified in the last succesfull MODE SELECT after an
unload operation, in case it is not able to automatically determine
the density of the new medium.
2000-11-03 10:46:18 +00:00
e3aaa6c1ab
* Per st(4), retrieving status and setting modes on the control device
...
should succeed even if no media is loaded.
* In stopen(), check the return value of st_mount_tape().
2000-11-03 10:22:02 +00:00
cee0acd601
Add
...
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
#options IPSEC_DEBUG # debug for IP security
In the case of VOYAGER, comment out INET6 also
2000-11-03 10:18:55 +00:00
d3ca42abf0
Add support for Socket Comm. PC Card Ethernet, and tidy up naming.
2000-11-03 09:07:24 +00:00
343f07f2ac
Fix some db_printf() format.
2000-11-03 06:27:34 +00:00
39355e9743
Make this compilie with LANCE_REVC_BUG.
2000-11-03 06:21:32 +00:00
ff3b4a0dab
Switch to MI md_root.c. Tested on RAMDISK3X kernel.
2000-11-03 05:52:42 +00:00
6bf0b47164
Fix typo in the previous revision. (s/LIdle/Lidle/)
2000-11-03 05:28:28 +00:00
d952450835
Wrap function declaration with "#ifndef sun3/#endif"
...
because sun3 does not have bus_space(9) support and
it have not switched to MI intersil7170 driver.
XXX We should split this into intersil7170{reg,var}.h ?
2000-11-03 05:23:07 +00:00
0750f35353
Fix printf formats in panic messages.
2000-11-03 04:52:27 +00:00
9702e75aa1
Sync with FreeBSD: Add a scanner. Fix a pasto.
2000-11-03 04:00:15 +00:00
be1c09c850
Use the canonical RF_PROTECTED_SECTORS #define hack.
2000-11-03 00:30:34 +00:00
930c4cf062
First attempt at multicast stuff. I suspect it doesn't work.
...
Use ether_ioctl -- saves 300 bytes of text.
2000-11-03 00:25:36 +00:00
84f1b64ed1
VFB01 framebuffer is 2048 bits wide (but only displays the first 1024 bits
...
of each scan line). Fix the fi_linebytes value to get the right size.
Fixes the 'compressed' display problem with the 2100/3100 monochrome display.
2000-11-02 23:37:08 +00:00
42e564ed45
Remove unnecessary includes.
...
Add a compiled-in RCSID.
2000-11-02 21:56:46 +00:00
13234acd0f
Convert to using ether_ioctl().
...
G/C huge swathes of unused code and outdated comments.
2000-11-02 21:42:41 +00:00
ae21e0d12e
Use "defined(sun3)" rather than "defined(_SUN3_) || defined(_SUN3X_)"
2000-11-02 21:24:16 +00:00
4ebb5f04e4
Fix typo in comment.
2000-11-02 21:18:03 +00:00
f5f7066fc8
When a read DMA transfer is interrupted by a disconnect on the IOASIC SCSI
...
and the buffer is not 8-byte aligned, it leaves a partial transfer in the
SDRx registers. This could cause data corruption in dump(8) because the
read-ahead buffers are allocated on a non-aligned address. When the read
DMA transfer is interrupted and the current DMA position is not aligned,
call the dma_end() routine to flush the SDRx register contents to the
buffer.
2000-11-02 21:00:04 +00:00
b2429742a5
Print out product info on attach.
2000-11-02 18:55:46 +00:00
2f33599840
Casting lvalues is evil. Do it the right way.
2000-11-02 17:04:28 +00:00
ab1d1ef33d
Add code to read the disklabel and add the beginning offset for A. Add
...
support for booting off a RAID root parition.
2000-11-02 17:01:47 +00:00
fba0f63c68
Change the way we make machine-links so that only occurs when we are building
...
on VAX.
2000-11-02 17:00:24 +00:00
16bbba0a23
Fix bug w/previous.
2000-11-02 16:50:17 +00:00
746166e492
Fix sparc64 LP64 issues.
2000-11-02 16:14:05 +00:00
d36abffc92
sync with struct tty change (does it look correct?)
2000-11-02 15:51:18 +00:00
78e81aa036
Remove unused define.
2000-11-02 14:48:51 +00:00
2fe4478f19
Don't assume 12x22 font.
2000-11-02 14:25:51 +00:00
f71476a62f
Introduce ST_Q_ERASE_NOIMM, a quirk indicating that the device rejects
...
an ERASE command with the `Immed' bit on.
Use it on the VIPER 21247 & 21531.
2000-11-02 13:34:59 +00:00
thorpej