83176f3b3c
fix alignment problem in ancillary messages (alpha).
...
the change constitutes binary compatibility issue hen sizeof(long) !=4.
there's no way to be backward compatible, and only guys affected
are IPv6 userland tools.
From: =?iso-8859-1?Q?G=F6ran_Bengtson?= <goeran@cdg.chalmers.se>
2000-02-18 05:19:23 +00:00
c9f3b6ba01
Adjust previous change for R3000 load delay slot.
2000-02-18 03:46:43 +00:00
71979ea6fb
Make the MIPS1 and MIPS3 code more similar.
...
XXX Needs testing on MIPS1.
2000-02-18 00:15:15 +00:00
9e77fba716
Take a whack at allowing sN, sp and gp to be set from DDB, too.
2000-02-18 00:02:43 +00:00
3ade108e4b
Allow vN, aN, tN, ra, sr, mul[lo,hi] and pc to be set from DDB. sN requires
...
more work.
2000-02-17 23:52:23 +00:00
c41cbbb8b7
Fix obvious typo.
2000-02-17 22:16:31 +00:00
a00eb27e1a
More 802.11 subtypes: there's also 1MB/s DS
...
(the BayStack 660 firmware claims to support it).
2000-02-17 21:53:16 +00:00
760d110b96
Regen.
2000-02-17 21:31:39 +00:00
b95959c4c8
Give platid_name_table_size a type.
2000-02-17 21:31:13 +00:00
132107ce3b
Add a whole slew of registers found in the PCnet-PCI family.
2000-02-17 20:18:29 +00:00
6fa8665eeb
Handle detach that happens before attach has finished. (Reported by mycroft.)
2000-02-17 18:42:21 +00:00
50c84950f2
awi: rewrite to be higher performance.
2000-02-17 17:37:23 +00:00
1955c335af
Regen.
2000-02-17 16:30:44 +00:00
536b31a5c8
Add Sony PCGA-UMS1 mouse.
2000-02-17 16:30:11 +00:00
7adb22cfa5
Add detach support.
...
Light cleanup.
2000-02-17 15:58:32 +00:00
7ff31fc326
Update patch from Witold Wnuk in PR 9335 to solve potential security
...
issue noted by tls.
2000-02-17 12:34:26 +00:00
12636d3570
bump __NetBSD_Version__ due to change in protosw for pfil
2000-02-17 11:41:59 +00:00
a156f44da6
bump __NetBSD_Version__ due to change in protosw for pfil
2000-02-17 11:01:20 +00:00
fd7edad6c3
Change the use of pfil hooks. There is no longer a single list of all
...
pfil information, instead, struct protosw now contains a structure
which caontains list heads, etc. The per-protosw pfil struct is passed
to pfil_hook_get(), along with an in/out flag to get the head of the
relevant filter list. This has been done for only IPv4 and IPv6, at
present, with these patches only enabling filtering for IPPROTO_IP and
IPPROTO_IPV6, although it is possible to have tcp/udp, etc, dedicated
filters now also. The ipfilter code has been updated to only filter
IPv4 packets - next major release of ipfilter is required for ipv6.
2000-02-17 10:59:32 +00:00
f7ad1af2b5
Use bpf_mtap() correctly.
2000-02-17 05:41:41 +00:00
de10c7425e
backout incomplete hack from KAME codebase (originally from bbn).
...
the hack tries to respect ifa or ifp passed to RTM_ADD. However, the change
broke certain link-layers. They include:
- midway ethernet card (en*), which uses sockaddr_dl in gateway portion
to pass PVC information. with the patch, the gateway portion will be
overwritten by empty sockaddr_dl and PVC initialization will fail.
- IPv6, which can't set static ND table with the patch (ndp -s), for the
similar reason as above.
There may be improved hack coming soon, hope the new one does not break others.
2000-02-17 04:28:00 +00:00
f30d8c9d30
Include mac68k/dev/akbdmap.h, not macppc/dev/akbdmap.h. Fixes PR 9435
...
filed by Dave Huang <khym@bga.com>.
2000-02-17 02:07:07 +00:00
d87b838524
Fix TMASK to use all 5 lower bits of the media word, and add HomePNA 1.0.
2000-02-16 18:03:14 +00:00
1da0c062ce
Make sure access of ssir atomic. (from luna68k)
2000-02-16 15:32:03 +00:00
a6343f76db
Unused. (PR 9424)
2000-02-16 14:02:13 +00:00
729f693364
- if ip_dst matches address on !IFF_UP interface, and
...
- there's no match against addresses on IFF_UP interface,
send icmp unreach if I'm router. drop it if I'm host.
Revised version of PR: 9387 from nrt@iij.ad.jp . Discussed with thorpej+nrt.
2000-02-16 12:40:40 +00:00
791a70292c
correct ratecheck() signedness. without this fix, ratecheck() will never
...
success again after first success with lasttime=(0,0).
2000-02-16 12:36:19 +00:00
c13f6dd258
Introduce a sysctl to enable/disable if non-root users can mount filesystems.
...
Default: off.
2000-02-16 11:57:45 +00:00
c59358ebde
Add sysctl type for "usermount".
2000-02-16 11:57:00 +00:00
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
7deba340d7
Some of these function names are bad enough that no one else would probably
...
pick them, but preface them with rf_ anyway.
2000-02-16 01:10:44 +00:00
b178e1f58c
Add support for rate-limiting RSTs sent in response to no socket for
...
an incoming packet. Default minimum interval is 10ms. The interval
is changeable via the "net.inet.tcp.rstratelimit" sysctl variable.
2000-02-15 19:54:11 +00:00
971144c47f
Add ess at pnpbios
2000-02-15 17:14:50 +00:00
558d216998
Add pnpbios front end for ESS AudioDrive.
2000-02-15 17:12:54 +00:00
52014b23c5
Allow second-stage boot program to be specified on the command line.
2000-02-15 16:15:07 +00:00
59742052ea
Determine base address at run time.
2000-02-15 14:09:59 +00:00
9bb753bb2e
Nuke unused code.
2000-02-15 12:18:05 +00:00
141900755f
Nuke the local outc() since the prototype for the second argument of tputs()
...
now matches putchar().
2000-02-15 10:14:55 +00:00
8d6a7f1861
Grabage collect a 'struct buf *' left over from recent disksort changes.
2000-02-15 09:00:07 +00:00
f3b975e9a4
Add ICMP error rate limiting, based on the same for ICMP6.
...
Note, we're reusing the previously unused slot for "MTU discovery" (which
was moved to the "net.inet.ip" branch of the sysctl tree quite some time
ago).
2000-02-15 04:03:49 +00:00
800897b12f
make assumption on mbuf explicit (m->m_len >= sizeof (struct ip)).
2000-02-15 00:42:22 +00:00
d2bccc29d8
Fix a couple of brainos in the last.
2000-02-15 00:31:08 +00:00
4a1320b29f
Put the entry of FNW-3700T after the entry of SVEC-PN650TX
...
so that SVEC-PN650TX errornously recognized as FNW-3700T.
Pointed out by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
2000-02-14 23:13:49 +00:00
fe39281ea4
Fixes to the softdep code from Ethan Solomita <ethan@geocast.com>.
...
* Fix buffer ordering when it has dependencies.
* Alleviate memory problems.
* Deal with some recursive vnode locks (sigh).
* Fix other bugs.
2000-02-14 22:00:21 +00:00
fd8c03cf44
Allow arch-specific code to specify in4_cksum() like it can specify
...
in_cksum().
2000-02-14 21:42:50 +00:00
15c201069b
Change ratecap to its presumably intended type of struct timeval.
2000-02-14 21:17:04 +00:00
b223c00cee
Avoid linker error if no PHY is attached.
2000-02-14 20:29:54 +00:00
a90153e264
enlarge the initial kernel page table - needed for some 128 MB machine
2000-02-14 20:23:20 +00:00
445e42d77a
One small piece from UBC: create a pool for I/O buffers. One small piece
...
not from UBC: make physio use it instead of its own home-grown thing.
2000-02-14 20:12:02 +00:00
144759ef2b
Use ratecheck() for ICMP6 rate limiting.
2000-02-14 19:45:50 +00:00
2649d26c0e
Use ratecheck().
2000-02-14 19:28:19 +00:00
72252544f5
remove `flags' from sun4 zs declarations; the driver doesn't use it.
2000-02-14 18:08:38 +00:00
5b285d9509
Just skip matching the `slave' property against `cf_unit'.
2000-02-14 18:07:37 +00:00
1d373a94e2
Bump receive buffer size up to the maximum DMA burst boundary.
2000-02-14 17:14:28 +00:00
a1b5434cec
Make promiscuous mode go again.
2000-02-14 17:06:45 +00:00
0b8b55beaf
Add uninorth. Now iMac DV and Power Macintosh G4 should run NetBSD.
2000-02-14 14:57:52 +00:00
2750c23cdd
Add minimal support of openpic.
2000-02-14 12:45:52 +00:00
085f44145c
- Be more strict in status check before sending a command (make sure
...
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
of the problem is that the drive is unresponsive just after a reset.
The real problem (and the solution) showed up after the first change.
2000-02-14 12:37:35 +00:00
042be92f6f
Update for wscons.
2000-02-14 08:58:41 +00:00
2071e61796
Update for wscons.
2000-02-14 08:48:08 +00:00
14af97fa26
add Sharp HC-1200
2000-02-14 07:22:19 +00:00
2d09174cce
regen.
2000-02-14 07:19:25 +00:00
8a00740789
Merge wscons work onto the main development branch.
2000-02-14 07:01:44 +00:00
f009580118
add Sharp HC-1200
2000-02-14 06:55:36 +00:00
9558d7b27b
Regen.
2000-02-13 23:10:22 +00:00
a39279da39
Add a bunch of devices.
2000-02-13 23:10:02 +00:00
2aafd71ec7
Reduce NKMEMPAGES_MAX_DEFAULT.
2000-02-13 17:01:47 +00:00
520d8c032e
Waked up from the dead
2000-02-13 13:01:14 +00:00
90fe757934
Fix typo in comment.
2000-02-13 10:25:07 +00:00
99b18eac36
on attach, check if we've got meaningful mac address or not,
...
to detect io mapping problem.
on detach, handle resource deallocations more carefully.
2000-02-13 06:17:58 +00:00
2a3b53a229
Remove __BROKEN_CONFIG_UNIT_USAGE.
...
This has been fixed on news1200 merge.
2000-02-13 05:40:36 +00:00
068fcab81e
Enable rl ethernet device.
...
General tidy up.
2000-02-13 05:26:04 +00:00
f43601877b
Remove __BROKEN_CONFIG_UNIT_USAGE.
2000-02-13 05:20:45 +00:00
d97d3dc6a5
Enable rl ethernet device and do some general cleaning up.
2000-02-13 05:19:40 +00:00
7ef62e2b59
Remove unncessary cf_unit usage.
...
Make sure we only attach 1 of these devices.
2000-02-13 05:00:57 +00:00
9316cea99d
Remove unnecessary cf_unit usage.
2000-02-13 04:59:57 +00:00
919df6690a
Add support for / on RAID. A bit of a gross hack, but sufficient for now.
...
Note that this doesn't help you much until the RAID autoconfig code
in sys/dev/raidframe/rf_netbsdkintf.c is turned on.
2000-02-13 04:57:44 +00:00
445591e874
Get recent changes into the tree:
...
- make component_label variables more consistent (==> clabel)
- re-work incorrect component configuration code
- re-work disk configuration code
- cleanup initial configuration of raidPtr info
- add auto-detection of components and RAID sets (Disabled, for now)
- allow / on RAID sets (Disabled, for now)
- rename "config_disk_queue" to "rf_ConfigureDiskQueue" and properly prototype
in rf_diskqueue.h
- protect some headers with #if _KERNEL (XXX this needs to be fixed properly)
and cleanup header formatting.
- expand the component labels (yes, they should be backward/forward compatible)
- other bits and pieces (some function names are still bogus, and will get
changed soon)
2000-02-13 04:53:57 +00:00
9671588a30
Allocate the page buckets out of kernel_map, not kmem_map. Saves 16
...
or so kmem_map pages on a 32MB SPARCstation 2.
2000-02-13 03:34:40 +00:00
952281e8fb
Fixed a bug in the ATR parsing; If TA(i) was absent, then TA(i+1) was
...
used as TA(i) (and similary for TB(i) and TC(i))
2000-02-13 01:31:22 +00:00
0b2e81991d
Avoid panic when a non-working hub is detached.
2000-02-12 23:44:16 +00:00
84b6105bbe
Check if device is active in wi_intr and wi_inquire.
2000-02-12 23:35:28 +00:00
8ff64870d4
The T0 byte must not be included in the TCK calculation (ISO/IEC 7816-3
...
chapter 6.4.5)
2000-02-12 22:40:12 +00:00
fc8ea8f0c5
Misplaced #endif.
2000-02-12 22:06:54 +00:00
d3fb7161d2
Regen.
2000-02-12 22:02:01 +00:00
b4fac8c7d0
Add Microsoft Internet Keyboard Pro.
2000-02-12 22:01:31 +00:00
59748e7e55
Fix the unaligned accesses discovered by dbj.
2000-02-12 21:58:58 +00:00
09943f0ffa
G/c references to VM_KMEM_SIZE.
2000-02-12 20:57:12 +00:00
53e6733789
awi is an 8-bit only card, so set the 8bit flag.
2000-02-12 19:58:35 +00:00
1268cc5d6c
If we got an xfer from our backlog queue, don't allow sleeping; we're in
...
interrupt context.
XXX This is fixed properly in the thorpej_scsipi branch, but that won't
be ready for 1.5, I don't think.
2000-02-12 19:12:52 +00:00
fc72b13d27
Const poison.
2000-02-12 19:05:55 +00:00
fd4ed9b425
Typo (Thanks, Havard :-)
2000-02-12 18:00:00 +00:00
46f7b67929
Small cosmetic change, and note a place where a statistic should be
...
gathered.
2000-02-12 17:45:44 +00:00
312cb38ccb
In the tcp_input() path:
...
- Filter out multicast destinations explicitly for every incoming packet,
not just SYNs. Previously, non-SYN multicast destination would be
filtered out as a side effect of PCB lookup. Remove now redundant
similar checks in the dropwithreset case and in syn_cache_add().
- Defer the TCP checksum until we know that we want to process the
packet (i.e. have a non-CLOSED connection or a listen socket).
2000-02-12 17:19:34 +00:00
8e114c7994
Nuke unused variable.
2000-02-12 16:09:33 +00:00
02bf7fcd13
add wi_detach and friends so that we can hot-swap wi card.
2000-02-12 16:08:04 +00:00
edc931efea
Make this compile without warnings on alphas.
...
(Problem noted by Aaron J. Grier)
2000-02-12 16:06:27 +00:00
918676c04f
Remove __BROKEN_CONFIG_UNIT_USAGE.
2000-02-12 16:00:13 +00:00
539689da9d
Remove another unneccessary reference to cf_unit.
2000-02-12 15:58:45 +00:00
c6471e4d9a
Remove an unneccessary reference to cf_unit.
2000-02-12 15:48:34 +00:00
523d157a05
Regen.
2000-02-12 15:02:56 +00:00
a79d73d045
Add Corega FEther adapter. From PR 9394.
2000-02-12 15:02:21 +00:00
e9c7fb4c36
change ramdisk size.
2000-02-12 13:48:46 +00:00
19533212a5
Correct comments on KGDB_* entries.
2000-02-12 12:59:36 +00:00
b518dc6dfc
Eliminate much of the goo in setting up zs device addressing.
2000-02-12 12:51:03 +00:00
980ac3a9eb
Fix typo.
2000-02-12 08:52:11 +00:00
01868857df
Add activate routine and check device active flag also in one second
...
tick handler.
2000-02-12 04:05:49 +00:00
fbc47bda30
Cosmetic changes.
2000-02-12 03:55:49 +00:00
5903e181fa
Nuke NKMEMCLUSTERS.
2000-02-12 03:29:18 +00:00
49ac0acd83
delete NKMEMCLUSTERS from configuration files.
2000-02-12 03:21:06 +00:00
1b188ee2ff
A lot of cleanup and shrinkage. Some items moved to isp_tpublic.h.
2000-02-12 02:33:34 +00:00
55a78c1ee4
Add in 12160 (Ultra3) support. Turn back on fast posting for the new
...
generateion parallel SCSI cards (1240/1080/1280/12160). Split up nvram
reading routines to be more readable. Fix topology reporting- 2200 has
connected topology in mailbox 6 when you're done getting your loop id
(supported: Private Loop (NL Port), N-Port, F-Port, FL-Port). The 2100
doens't report this, but we can synthesize it to be either NL-Port or
FL-Port. Add in some connection mode async events.
2000-02-12 02:32:21 +00:00
56e16448ad
add in 12160 (Ultra3) related definitions
2000-02-12 02:29:00 +00:00
9f63fdeefb
add in 12160 (Ultra3) NVRAM definitions
2000-02-12 02:28:32 +00:00
87355d841f
add some Qlogic 2200 point-to-point and extended ICBOPT definitions
2000-02-12 02:26:26 +00:00
50f2620822
add 80 MHz case
2000-02-12 02:25:28 +00:00
3f96822c3b
some minor cleanups
2000-02-12 02:24:20 +00:00
63c56a9de6
add a more public shared i/f to target mode
2000-02-12 02:23:13 +00:00
6eba47aa8f
add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot
2000-02-12 02:22:37 +00:00
29f08cd82d
add 12160 (Ultra3) microcode
2000-02-12 02:07:49 +00:00
3a09830119
printf format mismatch in DEBUG code (related to already fixed PR hp300/9388).
2000-02-11 23:00:47 +00:00
d10190a70c
Move the ite_default_* variables to ite.c. They are generic ite.
2000-02-11 21:42:52 +00:00
39a8093c78
Remove redundant test.
2000-02-11 21:36:38 +00:00
107405406d
Oops! Both grfcc and grfet need the generic grfabs layer.
2000-02-11 21:35:42 +00:00
dded044fc2
Update for the NKMEMPAGES changes.
2000-02-11 19:25:12 +00:00
eb9cbbe294
Add some very simple code to auto-size the kmem_map. We take the
...
amount of physical memory, divide it by 4, and then allow machine
dependent code to place upper and lower bounds on the size. Export
the computed value to userspace via the new "vm.nkmempages" sysctl.
NKMEMCLUSTERS is now deprecated and will generate an error if you
attempt to use it. The new option, should you choose to use it,
is called NKMEMPAGES, and two new options NKMEMPAGES_MIN and
NKMEMPAGES_MAX allow the user to configure the bounds in the kernel
config file.
2000-02-11 19:22:52 +00:00
9bf09631c6
Only output message on really special DEBUG kernels.
2000-02-11 19:09:56 +00:00
d696094217
Change ICU_LEN to 64.
2000-02-11 13:15:43 +00:00
82b005364c
don't increase both "no port on broadcast packet" and "no port" stat.
...
increasing both of them will result in negative number on udp
"delivered" stat on netstat(8), since netstat computes number of delivered
packet by subtracting them from number of inbound packets.
2000-02-11 10:43:36 +00:00
dc80cc068b
Move KERNBASE to 0xc0000000, giving the kernel a more-or-less full 1G
...
of virtual address space, leaving userland with 3G, and update comments
to match the new reality.
We knew we were going to have to bite this bullet eventually, and there
are a couple of outstanding PRs related to this issue (9389 and 9313).
Complete solution to those PRs is going to involve some sort of run-time
decision on how large kmem_map should be, as well as changing some data
structure allocation strategies in UVM. However, this change will at
least allow the PR submitter to simply throw resources at the problem.
2000-02-11 07:00:11 +00:00
5d257be455
make assumption in rt_msg1 (len <= MHLEN + MLEN) explicit.
...
panic if not satisfied.
2000-02-11 06:11:03 +00:00
46dfa55555
fix in-kernel packet forwarding loop (till TTL becomes 0) when:
...
- a packet is delivered to an address X,
- and the address X is configured on my !IFF_UP interface
- and ipforwarding=1
NetBSD PR: 9387
From: nrt@iij.ad.jp
2000-02-11 05:57:58 +00:00
160bf15b09
Add com0's power control ID.
2000-02-11 03:20:17 +00:00
2db5581a4c
Declare the mcclock_pad32_busfns variable as extern.
2000-02-11 02:36:16 +00:00
255608f126
Add support for a "RAID" partition type.
2000-02-11 02:04:42 +00:00
29ae6dbe05
We're given a K1SEG address already.
2000-02-11 01:32:42 +00:00
5f9e257c5a
Fix a couple of printf format botches. port-hp300/9388, Steve Peurifoy.
2000-02-10 23:02:16 +00:00
dc0ce1249b
fix interrupt handling
...
I still get lost interrupts on the A1200, but the problem is certainly
elsewhere (not in wdc_amiga).
2000-02-10 15:51:59 +00:00
ff0fe5df65
fix ip4 protosw.
...
gif interface and gre interface should be able to coexist.
2000-02-10 14:44:28 +00:00
1dc2d9d399
Don't display "NetBSD disklabel". This message appears too many times
...
if more than two or three disks exist.
2000-02-10 12:33:45 +00:00
d8595b9af3
map common memory 8 bit for cis scan when following longlinks.
2000-02-10 09:01:52 +00:00
44b423d73b
always map attr memory 8 bit, since its defined that way.
2000-02-10 09:00:19 +00:00
18452e3667
- add GPIO related comments.
...
- add IBM WorkPad z50 buttons.
2000-02-10 08:45:44 +00:00
709f6f50a2
show edge/level infomation in attach message.
2000-02-10 08:37:07 +00:00
e19b30ff0a
delete \n in cpu_model.
2000-02-10 08:34:08 +00:00
9621e6be50
Reset maxstray count if we get a good interrupt for a level.
2000-02-10 07:45:43 +00:00
13e13336b2
Allow (re)setting of maxstrays after establishment of a shared interrupt.
...
This allows sporadic stray interrupt counts to be reset by an acknowledgement
of the same interrupt.
2000-02-10 07:45:02 +00:00
4821b5ae2f
Guard against trying to disable an interrupt where we'd dereference a
...
bad pointer.
2000-02-10 04:31:36 +00:00
1dd1e143a9
add machine model name to cpu_model.
2000-02-10 02:15:01 +00:00
549e292ae4
update MINYEAR.
2000-02-10 02:06:16 +00:00
d129ec5214
Fix typo in error message
2000-02-09 23:25:15 +00:00
a10113c83a
fix a couple of things to (hopefully) make this work on the A1200
2000-02-09 22:27:20 +00:00
d40e2b51ee
add detach code
2000-02-09 22:15:57 +00:00
39db0e9c7e
Three MULTIPROCESSOR + LOCKDEBUG fixes:
...
1) fix typo preventing compilation (missing comma).
2) in SLOCK_WHERE, display cpu number in the MP case.
3) the folowing race condition was observed in _simple_lock:
cpu 1 releases lock,
cpu 0 grabs lock
cpu 1 sees it's already locked.
cpu 1 sees that lock_holder== "cpu 1"
cpu 1 assumes that it already holds it and barfs.
cpu 0 sets lock_holder == "cpu 0"
Fix: set lock_holder to LK_NOCPU in _simple_unlock().
2000-02-09 16:46:09 +00:00
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
67bc20747a
Support Xircom CompactCard Ethernet CFE-10.
2000-02-09 14:54:53 +00:00
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
968822bd48
The pwctl writes ZERO as on if active=0.
2000-02-09 14:39:06 +00:00
dc87f2899f
- No need to keep track enable/disable state here. The smc91cxx.c also
...
manages it.
- Disestablish an interrupt when failed to enable card.
- Don't say I'm enabled if failed to enable card.
2000-02-09 13:40:42 +00:00
94a6dd9169
Regen.
2000-02-09 13:33:22 +00:00
947c0fee74
Add an entry for Planex FNW-3700-T.
2000-02-09 13:32:23 +00:00
e729d284ad
Add an entry for Melco LPC3-TX.
2000-02-09 13:20:55 +00:00
502ad73200
Add wsfont options.
2000-02-09 13:10:15 +00:00
dcb9f03bd3
Use dev/rasops instead of dev/rcons.
2000-02-09 13:08:35 +00:00
e92b285eaf
Add an entry for Xircom CompactCard Ethernet CFE-10.
2000-02-09 13:07:45 +00:00
0694de05ed
Fix Work Pad z50's entry.
2000-02-09 13:03:31 +00:00
0867c09dad
Change va_arg definition when __lint__ is defined.
2000-02-09 12:54:47 +00:00
19e9558eaf
sync with extended scoped address syntax change.
2000-02-09 12:27:03 +00:00
ad591b78f4
CLOCK_RATE: 256-> 128.
...
reduce timer interrupts because hpcmips machines are lower cpu power.
2000-02-09 10:41:18 +00:00
9fb475bc29
Missing commit to reflect ioasicreg.h merge.
2000-02-09 08:37:43 +00:00
43917001c7
- Add missing "opt_ddb.h" to dc.c and dtop.c (oh, boy)
...
- Nuke irrelevant "dcvar.h" and "tc.h" inclusion from dc.c
- Put '#if NRASTERCONSOLE > 0' around scc_lk201_cnattach().
2000-02-09 08:29:40 +00:00
0a1d6b1357
Make it compile with options DEBUG.
...
Reported by Kawamoto Yosihisa (PR #9379 ).
2000-02-09 07:57:52 +00:00
7f5a7c00ac
fix include file.
...
<netinet6/ip6.h> -> <netinet/ip6.h>
2000-02-09 05:48:26 +00:00
53e333c935
honor ifa reference counting.
2000-02-09 03:34:01 +00:00
541b446bfa
for more strict rfc2367 conformance, move netkey/keyv2.h into net/pfkeyv2.h
...
(net/pfkeyv2.h used to just include netkey/keyv2.h).
netkey/keyv2.h includes #error only for several days, to inform
of file path change. after that I plan to nuke the file.
2000-02-09 03:27:29 +00:00
f9e531f1e4
Don't force BWX on Pyxis by default; it's just not reliable enough.
2000-02-09 01:39:20 +00:00
59d74f3d21
to improve RFC2553/2292 compliance, and promote use of
...
RFC2553/2292-compliant header file path, now the following headers are
forbidden:
netinet6/ip6.h
netinet6/icmp6.h
netinet6/in6.h
if you want netinet6/{ip6,icmp6}.h, use netinet/{ip6,icmp6}.h.
if you want netinet6/in6.h, you just need to include netinet/in.h.
it pulls it in.
(we may need to integrate them into netinet/in.h, but for cross-BSD code
sharing i'd like to keep it like this for now)
2000-02-09 00:54:55 +00:00
4f53db2499
optimize mbuf allocation for ip/tcp/tcpopt part.
2000-02-09 00:50:40 +00:00
ec02ebc8a0
Adjust for IOASIC register changes.
2000-02-09 00:33:03 +00:00
a62753d0b7
Make OF-2.x can also find root device.
2000-02-08 20:02:13 +00:00
76c14cd322
Don't stall the control pipe on error.
2000-02-08 18:46:03 +00:00
e922214fb2
Use NULL instead of 0.
2000-02-08 18:45:27 +00:00
3bc7ce8d31
Cast bus_size_t to u_long for printing.
2000-02-08 18:40:51 +00:00
73286f8d56
Fix printf() format string.
2000-02-08 18:31:02 +00:00
2a2d421881
Forgotten part of chopps\'s i82365_isasubr.c commit.
2000-02-08 17:56:58 +00:00
ac0db48a13
In light of the previous change, whack the clearing of CSC_INTR
...
again.
2000-02-08 17:53:48 +00:00
eb071839ea
The final read of the CSC register does not appear to be needed any
...
more.
2000-02-08 17:48:39 +00:00
d12c4012f1
deal with loops that we get stuck in due to unhandled interrupts.
2000-02-08 17:14:29 +00:00
5abb516b1e
Be more careful with the CSC_INTR register while probing.
...
Make some output more specific.
2000-02-08 16:59:52 +00:00
f522d6f1ee
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 16:26:23 +00:00
b3cffb232f
regen
2000-02-08 16:24:00 +00:00
b614c6a569
Add US Robotics vendor ID, and USR 3CP5609 PCI 16550 Modem product ID.
...
From Kent Polk.
2000-02-08 16:22:37 +00:00
e20ce57cd6
Store also attribute identifier in the filehandle structure, so that
...
proper file attribute (a.k.a. "resource fork") is picked up when
the filehandle is mapped back to filesystem object.
This should make attributes working on NFS-exported NTFS filesystems
or other layered filesystems using filehandles.
2000-02-08 16:17:58 +00:00
6968a454bd
Add news1200 support.
...
Based on a patch from Koichi NISHIWAKI <k-nis@ba2.so-net.ne.jp>
2000-02-08 16:17:28 +00:00
b933f19ea2
Flush cache before rebooting to preserve msgbuf.
2000-02-08 12:57:11 +00:00
34d63b5623
Since we now only allocate this one, no longer necessary to check and free().
2000-02-08 12:56:00 +00:00
1658944ebe
- Don't rely on implicit declaration.
...
- Sinc wi/ existing coding style.
2000-02-08 12:51:30 +00:00
c7573d517e
- Bail out from attach stage if failed to enable card, number of iospace
...
or memspace is unexpected, failed to map iospace or failed to configure
the controller properly.
- Disestablish an interrupt handler if failed to enable card.
2000-02-08 12:49:12 +00:00
d97ae29629
Enter power saving mode in idle loop on 603, 750, and 7400.
...
603 uses doze mode, 750 and 7400 use nap mode.
2000-02-08 12:49:06 +00:00
9cba8a13d1
Use -Os -mmultiple to reduce size.
...
Add cbb and pcmcia/cardbus devices.
Nuke BUFPAGES=800 kludge.
2000-02-08 12:13:50 +00:00
c7d216c2da
Add missing locators.
...
Add tlp at cardbus.
2000-02-08 12:10:56 +00:00
e0c519464a
Add methods for ucom to call back on open/close.
2000-02-08 09:18:01 +00:00
45fe0e4077
Fix typo.
2000-02-08 08:08:43 +00:00
8613a0edaa
Regen.
2000-02-08 06:36:46 +00:00
a87f862d24
Add Allied Telesyn AT-1500, lance ethernet.
2000-02-08 06:36:29 +00:00
42e4e9fd0c
Add the missing piece of previous mod.
2000-02-08 04:35:03 +00:00
554df2b994
remove kern_logsigexit being "on" for DIAGNOSTIC
2000-02-08 04:13:51 +00:00
bc1ca7aa3f
Add a bunch of debugging code, #ifdef FPU_DEBUG, which attempts to
...
trap FPU usage in the kernel.
2000-02-08 03:16:00 +00:00
a3b8d596d5
Sync with GENERIC.
2000-02-08 03:10:21 +00:00
bfdc6759fb
Don't rely on the receive descriptor's BCAST/MCAST status bits. Test the
...
Ethernet destination address to see if it's multicast.
2000-02-08 00:22:13 +00:00
52a2804a5c
Add a new function call to the ISA DMA API: isa_dmamaxsize(), which returns
...
the maximum transfer size for the specified DMA channel. Make all clients
of ISA DMA use this call to determine their maximum transfer size.
2000-02-07 22:07:27 +00:00
1d46ce41ea
Enable the hme ethernet driver.
2000-02-07 21:24:48 +00:00
b9ff560bcc
Don't print "... not configured" message for non real devices
...
like escc-legacy.
2000-02-07 20:30:05 +00:00
5c83cd7b9c
Bump version to 1.4S -- b_rawblkno.
2000-02-07 20:19:13 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
b19c0fbb0a
Make kernel SOMAXCONN patchable. Will add sysctl once we
...
decide on namespace.
2000-02-07 18:43:26 +00:00
cb18849e48
Make APM use a kernel thread rather than a callout, and provide a
...
mutex between the thread and a user process attempting to do APM
operations.
2000-02-07 17:36:59 +00:00
cf532aa7eb
Move CFLAGS and CPPFLAGS to {bootxx,ofwboot}/Makefile to compile installboot
...
without -D_STANDALONE.
2000-02-07 16:26:59 +00:00
6328fac75d
Add bootm_init() prototype.
2000-02-07 14:36:42 +00:00
aa4732525f
Fix from Darren Reed for the test failure of f11.
2000-02-07 13:58:00 +00:00
de608f33e1
Don't use PROM the virtual address (if any) for the device registers;
...
they are not reliably mapped. Also, unmap registers if the device
cannot be configured properly.
2000-02-07 11:44:15 +00:00
a534cd4254
Correct John Markus Bjørndalen's horribly mangled name in a comment.
2000-02-07 09:40:37 +00:00
a8365d0e29
Use pcmcia_devinfo().
2000-02-07 09:36:27 +00:00
e2ab50484b
Add a pcmcia_devinfo() function (akin to pci_devinfo). It generates a
...
string suitable for printing in the attach message.
2000-02-07 09:35:29 +00:00
2687887f38
s/DIAGNOSTIC/DEBUG/
2000-02-07 06:15:16 +00:00
85cdd5f08e
remove IPv6 router renumbering prefix information in the kernel
...
when all the interface addresses are gone.
this should remove dangling structure when:
# ifconfig lo0 inet6 3ffe::1 prefixlen 64 alias
# ifconfig lo0 inet6 3ffe::1 -alias
is performed.
2000-02-07 05:48:11 +00:00
1148e4715f
correct SIOCAIFADDR_IN6 failure recovery in point-to-point case.
2000-02-07 05:42:59 +00:00
49bed394bd
add more sanity check against mbuf length.
...
use log() for DAD related kernel message.
2000-02-07 05:42:28 +00:00
45b89333e4
close comment.
...
From: Kazuto Ushioda <x-y-z@3si.co.jp>
2000-02-07 03:51:59 +00:00
e9a4467c58
Fix thinko in previous revision: it wouldn't catch deassert.
...
Revert the code inside the new test to the previous-but-one revision.
2000-02-07 02:17:18 +00:00
2da22cf2c5
Check for DCD status change interrupts which signal PPS events, even
...
if the line discipline is ignoring carrier (e.g., via comparam()'s
setting of sc->sc_msr_mask). Move PPS timestamp outside the normal
status-change processing, and ignore sc_msr_mask when testing
for PPS events.
2000-02-06 23:23:37 +00:00
93be165768
Remove an "#if 0" I seemed to have missed, to include wd* devices in the
...
search for root filesystems.
2000-02-06 21:45:03 +00:00
96250cd570
fix the calculation bug for the LMA of bss.
2000-02-06 16:53:57 +00:00
8636e8eef7
Update for compat_netbsd32.
2000-02-06 16:49:51 +00:00
70694ad4bb
Add new P_32 flag for processes running 32-bit emulation.
2000-02-06 16:47:57 +00:00
cde9dba8ab
Add support for -current's ELF32 exec format.
2000-02-06 16:45:56 +00:00
72ecabeb4d
In if_detach(), call PRU_PURGEIF for *every* protocol within a domain
...
that has a usrreq entry point. Each protocol may have its own PCB
tables that need to be purged of references to the interface.
2000-02-06 16:43:33 +00:00
06aa6ffcb9
Delete dupicated 'z50'.
2000-02-06 14:02:42 +00:00
986d236119
remove COMPAT_NOMID stuff
2000-02-06 13:13:20 +00:00
90736ab608
fix include pathname for better rfc2292 compliance.
2000-02-06 12:49:37 +00:00
23774a37c9
remove unused variable *dp.
2000-02-06 11:14:56 +00:00
51219dabc9
to be more rfc2292 complient, move ip6.h and icmp6.h into netinet.
...
(netinet6/{ip6,icmp6}.h is non-standard path - these files should go away)
it was not possible to use cvsmove in this case.
when you try to look at history, chase it toward netinet6/{ip6,icmp6}.h.
2000-02-06 11:11:29 +00:00
1a8f3a2b75
Add platid_name() which retrieves the platform name.
2000-02-06 08:47:03 +00:00
dbeafc9dbe
clean up some printfs
2000-02-06 08:14:13 +00:00
76064f5770
don't chase mbuf pointer when it is NULL.
2000-02-06 08:06:43 +00:00
c75556a12f
Add kernel logging of processes which exit on signals which can
...
cause a core to drop, and whether the core dropped, or, if it did
not, why not (i.e. error number). Logs process ID, name, signal that
hit it, and whether the core dump was successful.
logging only happens if kern_logsigexit is non-zero, and it can be
changed by the new sysctl(3) value KERN_LOGSIGEXIT. The name of this
sysctl and its function are taken from FreeBSD, at the suggestion
of Greg Woods in PR 6224. Default behavior is zero for a normal
kernel, and one for a kernel compiled with DIAGNOSTIC.
2000-02-06 07:29:56 +00:00
a4746f91c3
choose first keymap that matches.
...
Otherwise, the NEC MobilePro 770 chooses the wrong one.
This is consistent with keymap searching order from before revision 1.12,
although I haven't investigated why choosing the last match instead of the first
causes the MobilePro 770 to lose
2000-02-06 06:29:22 +00:00
17c346b9e1
Changed cacheable -> prefetchable. [sync w/ swiz]
2000-02-06 04:07:18 +00:00
28bdaf37d9
Changed cacheable -> prefetchable.
2000-02-06 03:52:27 +00:00
113a379cba
Implement pffinddomain(), and use it as appropriate.
2000-02-06 02:54:15 +00:00
97eba73a40
If we have a Pyxis with the DMA page crossing bug, don't allow coalescing
...
of adjacent DMA segments.
XXX This is still not perfect... but making it perfect will probably
require additions to the bus_dma interface and the ISA autoconfiguration
interface.
2000-02-06 01:26:50 +00:00
0c4f8a876b
Implement an internal DMA map flag which prevents coalescing of
...
adjacent DMA segments.
2000-02-06 01:23:30 +00:00
5b4e17169b
Bring in the support to boot from ide drives. This is from dec_eb164.c.
...
This is needed for newer firmware and to boot from slave drives.
2000-02-05 22:22:41 +00:00
541c31000e
Sync the ide support with dec_eb164.c rev 1.32:
...
Add the support to boot an ide slave drive and to boot from the secondary
ide channel.
Michael Hitch gave me the final hint how to do that and Havard Eidnes
tested it with his slave drive.
This should fix pr#8808 on the DS10.
Also remove one ideboot check which wasn't removed when I removed it from
dec_eb164.c.
2000-02-05 22:19:19 +00:00
b92d490f3e
Add the support to boot an ide slave drive and to boot from the secondary
...
ide channel.
Michael Hitch gave me the final hint how to do that and Havard Eidnes
tested it with his slave drive.
This will also fix pr#8808 on the DS10 when I commit the changes to
dec_6600.c.
2000-02-05 22:14:42 +00:00
be5d89da1a
Add definition for default swap partition (libahdi uses this).
2000-02-05 21:14:55 +00:00
958e687d69
LP64 printf fixes.
2000-02-05 20:02:42 +00:00
d9b42dd1fc
At long last, the MI wdc glue for the Amiga. Tested on my A4000, but not
...
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
2000-02-05 18:46:28 +00:00
db4859bcd8
Regen (with commented MI wdc stuff)
2000-02-05 18:42:49 +00:00
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
915731c9ea
Add commented out configuration for MI wdc.
...
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.
2000-02-05 18:41:58 +00:00
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
494c9affea
Support detach.
2000-02-05 18:11:55 +00:00
9e9f3e15e4
need PRC_IF{UP,CHANGE}.
2000-02-05 18:11:41 +00:00
7604e315fb
sync with reality.
...
- getipnodeby{name,addr} is now non-issue as RFC2553bis will be dropping it
- if_detach is mostly done
- add some items
2000-02-05 18:05:33 +00:00
8759daabe7
Sync.
2000-02-05 14:35:41 +00:00
36e6bc645e
Improve namespace test macros a bit.
2000-02-05 14:04:36 +00:00
b527153dd7
Ensure uniqueness of EEPROM device without reference to cf_unit.
2000-02-05 12:32:57 +00:00
1f8497dc18
fix route cleanup on interface removal. (not sure why -Wall did not catch it)
2000-02-05 07:58:54 +00:00
b4f060a0bc
Mark LFS partitions as "BSD lfs ".
...
Now, swap partition should be "BSD swap" unless COMPAT_14.
2000-02-05 07:38:10 +00:00
645c869160
Add detach support for ethernet portion.
2000-02-05 04:44:00 +00:00
9267b8f018
Remove unnecessary includes.
2000-02-05 04:41:49 +00:00
abac10f360
Yet anothor workaround for hpcmips. I guess real problem is somewhere else...
...
With rev.1.37, my MobileGearII for DoCoMo finds both ne0 and wd0
even if pcic_delay_sleep is 1.
With rev 1.40, it fails to find wd0.
2000-02-05 04:34:36 +00:00
be8a1b19f0
more CR/NL -> NL conversion (some crept in)
2000-02-05 03:25:26 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
253b179629
clean up (group, sort) __HAVE_* defines
2000-02-05 00:07:30 +00:00
c343256107
Make the new findroot code work on PowerMac 9600 (OF-1.0.5).
2000-02-04 18:29:15 +00:00
2a46aa5d9a
Fix "unused variable" warning when FAILSAFE option is defined
2000-02-04 16:23:14 +00:00
b4edda97d5
Fix a compilation bug due to a missing parenthesys
2000-02-04 15:43:46 +00:00
f91ee608a9
avoid calling in6_control(SIOCDIFADDR_IN6) from interrupt context.
...
it is not supposed to work.
logging fix: add "\n" to some of log() in in6_prefix.c.
improve in6_ifdetach(). now almost all structure depend on ifnet
will be cleared up.
possible loose ends:
- cached route_in6 in static varaiables needs to be cleared as well
- there are ifaddr manipulation without reference counting,
which should be fixed
we still see panics after card removal, though... not sure what is left.
(sync with kame)
2000-02-04 14:34:22 +00:00
a7ec5e9634
Add Cyrix MediaGX(m) identification.
...
Thanks to INOUE Yoshinari <pf5y-inue@asahi-net.or.jp>.
2000-02-04 14:21:33 +00:00
e037c568cb
Update for cardbus unmap changes.
2000-02-04 13:48:23 +00:00
1facb42e6e
Make the driver work even if DIAGNOSTIC is not set.
2000-02-04 13:43:56 +00:00
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
9c688fd57c
s/SYSTEM/SYSMEM/; so that this file compiles again.
2000-02-04 11:04:46 +00:00
8006211b18
fix previous broken commit of the 8-bit memory handling (spotted
...
by Christian Hopps); this will enable 16-bit memory accesses for devices
that can handle it
2000-02-04 10:18:28 +00:00
0f09f8dd2b
cope with card insertion/removal during suspend-resume session.
...
(removal/ insertion after suspend and before resume)
How should we deal with card swaps?
2000-02-04 09:45:34 +00:00
730f15bb19
Free resources on attach failure.
2000-02-04 09:31:07 +00:00
82235a8673
Actually, no need to keep track of sc_ih.
2000-02-04 09:30:28 +00:00
10509171fb
avoid some of typecasting from in6_ifaddr to ifaddr.
2000-02-04 08:54:04 +00:00
2a1352a5b3
enable the card before establishing the interrupt to avoid being called
...
with stray interrupts before we are ready.
clear the card interrupt after enabling the card
2000-02-04 08:45:41 +00:00
70e711cd60
only enable interrupts from the controller if the socket is enabled
2000-02-04 08:42:47 +00:00
d344dd94ab
keep track of the enabled state of a socket
2000-02-04 08:42:07 +00:00
ded26ac3e4
Now cardbus_mapreg_unmap() has been implemented in
...
sys/dev/cardbus/cardbus_map.c. The detech function in
sys/dev/cardbus/if_tlp_cardbus.c uses cardbus_mapreg_unmap().
2000-02-04 07:59:20 +00:00
59db45db2a
bring over WEP mode from FreeBSD/OpenBSD
2000-02-04 07:48:29 +00:00
6bfa70b9c6
Remove an unused variable.
2000-02-04 07:48:11 +00:00
4a5667f967
undo part of the previous commit. I'll just steal the code from freebsd,
...
to minimize differences between the drivers.
2000-02-04 06:22:52 +00:00
9ff702157c
doh, remove debugging leftover (forcing irq 15 to always be avail).
2000-02-04 05:30:55 +00:00
af9710cf6e
Disestablish an interrupt if failed to enable the card.
2000-02-04 04:54:51 +00:00
itojun