9ddbeaedbb
- match if the function just probing is disk and its interface is ATA.
...
- use product table only for the card which requires quirks or doesn't
have disk device interface tuple.
1998-10-29 09:49:51 +00:00
3f3c763b1b
Define some constants for function extension tuple of disk function.
1998-10-29 09:45:52 +00:00
634f1b5bf7
fix typo and some indentation.
1998-10-29 09:42:45 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
04c995f517
Add support for media selection to the PCI front-end of the NE2000
...
driver. Currently supports:
RealTek 8029: 10base2, 10baseT, 10baseT-FDX, auto detect (but not FDX).
1998-10-28 00:15:54 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
a45667c4c3
Add register definitions for PCI NE2000-compatible extenstions, allowing
...
control over e.g. full-duplex mode, media, etc.
Currently, only extensions for the RealTek 8029 are defined.
1998-10-27 22:30:56 +00:00
e5c050d79c
Cosmetic changes in product lookup, to match other drivers.
1998-10-27 19:49:37 +00:00
2fd1cb5817
Regen.
1998-10-27 00:55:46 +00:00
64acdc1e7a
Product ID for Xircom CreditCard CE2 10base-T Ethernet.
1998-10-27 00:55:30 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
86fca03a0d
Driver for the Level One LXT-970 10/100 Ethernet PHY.
1998-10-24 00:33:17 +00:00
354f32509f
Pass the rigth argument to wdcintr(). Closes PR 6342.
1998-10-23 13:58:17 +00:00
afbf922a93
Don't print the revision of the 3c905B-TX's internal PHY; it's meaningless.
1998-10-23 01:52:50 +00:00
322ba3cc84
Make sure the parent is an `ex'. The 3c905B-TX's internal PHY isn't
...
the only one w/ non-existent ID registers. SIGH.
1998-10-23 01:43:09 +00:00
b301435840
back out last change - this file in unrelated to wscons stuff
1998-10-22 18:50:17 +00:00
01d6f66b07
adapt to keyboard driver changes
1998-10-22 18:37:57 +00:00
00d699282f
separate keyboard handling from serial interface handling some more,
...
improve bell handling, initialize kbd on powerup
1998-10-22 17:55:20 +00:00
31dec5ddc5
Add config flags for pciide: 0x001 forces the use of DMA when the driver
...
don't know how to set the controller's modes.
1998-10-22 15:11:39 +00:00
f6490fe309
- General cleanups for NWSCONS zskbd.c and zsms.c Comments for
...
future improvement work.
1998-10-22 08:37:16 +00:00
b70011edac
wscons mouse interface for DEC mice off the Zilog SCC.
...
Ported from dev/sun/ms.c by Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>.
1998-10-22 01:56:55 +00:00
605b15b723
Code from Toru Nishimura and Matthias Drochner work on pmax wscons in a
...
very slightly modified form for wscons support on the TC alpha.
XXX This could use some more work, but this code should be sharable
among the alpha and pmax systems as-is.
1998-10-22 00:53:24 +00:00
a8950dafc6
Updates from Takuya Kuomoto for wscons support for TC alphas.
1998-10-22 00:50:00 +00:00
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
c0ba12768e
Fix a sight open flags buglet pointed out by Matthias Scheler.
1998-10-20 22:26:04 +00:00
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
8aaec6d337
Fix typo.
1998-10-20 21:28:32 +00:00
1074ab2039
Make seq_input_event() static to avoid a name clash with the (commercial)
...
OSS audio LKM.
1998-10-20 21:19:22 +00:00
1456b01d77
Fix for Apollo DMA mode (not UDMA): DMA mode = PIO mode - 2, not PIO mode + 2 !
1998-10-20 18:47:45 +00:00
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
7bdbb5c993
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt(). Also use interrupts for wd_get_params in wdopen().
1998-10-20 17:00:25 +00:00
a7c841cfbc
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:24 +00:00
167e694c99
Regen.
1998-10-20 01:39:41 +00:00
1715793000
Add RealTek 8129 and 8139 10/100Mb Ethernet IDs.
1998-10-20 01:38:57 +00:00
f69c40b8be
Fix a memory leak in fxp_stop(), from the FreeBSD driver.
1998-10-19 23:51:15 +00:00
3ebe847640
Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
...
after more sleep.
1998-10-19 22:00:14 +00:00
f6f8ba3446
Allow uk to attach at atapibus.
1998-10-19 12:28:52 +00:00
5f723da8af
Move the "warning: bcount value is %d after io" message in a WDCDEBUG_PRINT.
...
Ifdef DIAGNOSTIC, print the above message only if bcount is < 0.
1998-10-19 12:28:03 +00:00
22acea3cb7
Fix a comment.
1998-10-19 12:26:22 +00:00
c90c4b829b
Add support for the second flavour of the VIA IDE chip (which has UDMA).
...
Don't claim DMA support if we don't have explicit support for this chip.
They're to may way to loose when trying to use DMA without configuring the
controller and disks.
1998-10-19 12:24:33 +00:00
04bdcc421c
Regen.
1998-10-19 12:13:57 +00:00
682ee5fdf3
Yet another attemp at getting the VIA tech. product name/ID's rigth.
...
It seems that different products have the same name (sigh).
1998-10-19 12:11:50 +00:00
18b6b32a67
Support for DWBUA (BI to Unibus adapter) and KLESI-B (TMSCP tape ctlr) added.
1998-10-18 18:47:18 +00:00
96a0812fd8
Kill an extra printf("\n").
1998-10-15 11:38:04 +00:00
d153ad6324
Some const poisioning.
1998-10-15 07:06:47 +00:00
859b5d88a6
Protect kernel prototypes w/ #ifdef _KERNEL.
1998-10-15 05:11:52 +00:00
2ebdceb3f7
Forward decl of struct proc.
1998-10-15 05:10:20 +00:00
ee042cb008
Disable the I/O address, DRQ and IRQ validation; assume that the config file
...
is sane.
1998-10-15 04:05:53 +00:00
d2d873481a
pcic_wait_ready(): If we didn't get READY, print out the current status.
1998-10-15 04:04:43 +00:00
6413810bf3
Stop spurious lpt messages from being printed -- approved by fvdl.
1998-10-14 20:09:06 +00:00
8f460d30f6
Nuke spurious ;
1998-10-14 18:05:45 +00:00
773dc968ad
Remove some debugging printf
1998-10-14 13:28:47 +00:00
de1d4ba9b0
Change the way uCode is loaded into board LRAM, to let it work on macppc.
1998-10-13 22:57:26 +00:00
e8322de657
Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
...
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
7545a59b8c
In debug message, always print controller:channel:drive
1998-10-13 15:02:41 +00:00
ff0134b99f
Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
...
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
39c8c94fa5
make it compile with GWETHER again.
1998-10-13 08:33:05 +00:00
dc7cfafe4c
Default to "no debugging messages" (still patchable).
1998-10-13 05:39:01 +00:00
cd7e3136ad
Use ETHERTYPE_ATALK instead of ETHERTYPE_AT. The former seems more common.
...
Our other constants also use "ATALK".
Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
1998-10-13 02:34:31 +00:00
13b8051475
Make this file compile again with -DATAPI_DEBUG_PROBE.
1998-10-13 02:09:47 +00:00
46aa11acac
Adjust include list.
1998-10-12 19:50:09 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
2101c736a3
Make the product lookup table-driven.
1998-10-11 18:42:01 +00:00
44d4d6a60a
Call correct ad1848 attach routine. Fixes PR 6269.
1998-10-11 17:02:36 +00:00
e0fa7545bf
Use pcmcia_io_free() where appropriate.
1998-10-10 22:01:24 +00:00
09b6735d35
Define missing pcmcia_io_free().
1998-10-10 21:59:40 +00:00
f1c971ea72
Device driver for PCMCIA multi-port serial cards. Currently supports
...
the Socket Communications, Inc. dual-rs232 device.
1998-10-10 21:27:21 +00:00
f568c6347c
Fix last commit -- NISADMA is either 0 or 1.
1998-10-10 13:43:10 +00:00
fe56f257b2
If the adapter returned XS_RESET and the xfer specifies a retry count,
...
attempt to reissue the command (which was destroyed by the bus reset).
Slightly modified from PR #6090 , from Matt Jacob.
1998-10-10 03:42:53 +00:00
16cf223098
Enforce open-for-writing on ioctls that change the bus's state.
...
Implement ioctl pass-through to the host bus adapter, allowing both
SCBUS* ioctls handled at that level and host adapter-specific ioctls
to be implemented. Implement SCBUSIORESET as a pass-through.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 03:33:01 +00:00
45bf57f8a6
Garbage-collect the SCIOCREPROBE and OSCIOCREPROBE ioctls. This is a
...
bus-oriented command. (How much sense does it make to open a device
to rescan the bus?!)
1998-10-10 02:35:30 +00:00
1e2b6a99ed
Implement the SCBUSIOSCAN ioctl. Rescans the bus for new devices.
1998-10-10 02:34:15 +00:00
e3fb94a7b4
Add the open/close/ioctl entry points for the SCSI bus, i.e. /dev/scsibusN.
1998-10-10 01:14:26 +00:00
dda872c16a
Define an additional host adapter return code, XS_RESET, indicating
...
that the bus was reset while the command was pending. The middle
layer may choose to retry the command.
1998-10-10 00:36:13 +00:00
29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
0a70a74239
Regen.
1998-10-08 20:44:00 +00:00
8ba90a1c93
Correct product ID for Socket Communications Dual Serial Adapter.
1998-10-08 20:43:42 +00:00
b69841d26a
Add a NOSYNCCACHE quirk for the Micropolis 2217-15MQ1091501, as reported
...
by Matt Jacob, PR #6027 .
1998-10-08 20:24:10 +00:00
39f4d1c239
Handle devices that have the SDEV_NOSYNCCACHE quirk.
1998-10-08 20:21:13 +00:00
7be31bed79
Add a "NOSYNCCACHE" quirk, as suggested by Matt Jacob in PR #6027 .
1998-10-08 20:17:52 +00:00
19d188b293
Regen.
1998-10-08 20:12:52 +00:00
1b15f541a6
Add Megahertz X-JACK 56kbps Modem, from Johnny C. Lam, PR #6173 .
1998-10-08 20:11:59 +00:00
5599443810
If ISA DMA is not present in the kernel (i.e. no ISA DMA-using devices
...
configured in), don't call ISA DMA functions to check for DRQs being
free. Just return EINVAL in this case. Fixes PR #6187 , from Herb Peyerl.
1998-10-08 19:59:20 +00:00
6a2b035300
Add a NOLUNS quirk for the Sony CDL1100 changer, from Chris Jones, PR #6238 .
1998-10-08 18:46:15 +00:00
0b4cfbfe6e
Fix some whitespace lossage.
1998-10-08 02:06:13 +00:00
bd7db8ba8a
Enable early probe stage printf's not by DIAGNOSTIC but more driver
...
specific macro constants.
1998-10-07 04:58:06 +00:00
568398bad2
regen data files
1998-10-07 01:08:57 +00:00
3067a16f6e
update for a broken variant of the Linksys E-CARD
1998-10-07 01:08:37 +00:00
423c1d8dd3
Make AdvanSys narrow driver compile on BIG_ENDIAN machines.
...
Thanks to Izumi Tsutsui
1998-10-06 14:44:21 +00:00
75f5ffdf21
Change backplace0 to mainbus0 (for consistency with other ports).
...
Remove unused function protocols from ka410.h and ka43.h
Fix some ka46 missing references
1998-10-06 04:04:30 +00:00
29c8a3aa85
Regen.
1998-10-05 20:38:17 +00:00
1469dc411b
Correct vendor 0x1191 to "ACARD", add missing Matrox boards.
...
Fixes PR kern/6251 by Soren S. Jorvang.
1998-10-05 20:34:39 +00:00
11bc54234b
In epic_init(), attempt to start output on the interface once the interface
...
is initialized.
1998-10-05 19:10:22 +00:00
ce47e78c84
Make MIDI input work again.
...
Fix from Torsten Duwe <duwe@ns.lst.de>.
1998-10-05 09:21:41 +00:00
ed54968bff
Regenerate from usbdevs.
1998-10-05 02:31:13 +00:00
0f505e03ac
Add Cypress Semiconductor vendor ID and Cypress Mouse product ID.
1998-10-05 02:30:17 +00:00
2aac65de87
Regen.
1998-10-04 23:52:43 +00:00
a6a06368ce
Add S3 Virge/DX, fixes PR kern/6245 by Steve Allen.
1998-10-04 23:50:05 +00:00
b2b0497860
Regen
1998-10-04 18:31:14 +00:00
ea1107f4c7
Add another soundblaster compatible card (Steve Allen)
1998-10-04 18:30:50 +00:00
b429e319fb
french keymap, from Matthieu Herrb <matthieu@mipnet.fr> per PR kern/6231
1998-10-03 12:02:45 +00:00
bdb85f9116
add definition for french keyboard
1998-10-03 11:59:44 +00:00
d9cb3415b1
Fix typo (pointed by Matthias Drochner).
1998-10-02 20:00:28 +00:00
b28935cee3
Add missing field to le_softc structure, missed in previous commit. Name
...
it consistently with the other fields.
1998-10-02 00:20:52 +00:00
5dbf12a22a
Regen.
1998-10-01 23:33:25 +00:00
b7957e0200
Fix typo in 905BT4 product name.
1998-10-01 23:32:41 +00:00
a81796636f
support media selection / full duplex
1998-10-01 20:39:01 +00:00
259cf4c4a1
Don't include <machine/mouse.h>. Some platforms (e.g. alpha) don't one.
1998-10-01 19:10:26 +00:00
1693b8b4a6
minor changes to console handling in zstty_attach():
...
-wait 20ms between printf() and reconfiguring the hardware
-set cn_tab->cn_dev here because this is the place where the real minor
number is known
1998-10-01 18:52:42 +00:00
379c9be4a8
More patches for ARC from Noriyuki Soda:
...
* commit isapnpvar.h changes required for ARC to support plain isa.
* fixup mistake over mips/include/cpuregs.h.
* mips/mips_machdep.c:
set L2 cache-size for arc, cleanup use of L2cache present
vs L2 cache-size variables. check for no L2 cache on kernels
configured to require one. misc cleanups.
* mips/mpis/trap.c: more locore stack-traceback label cleanup.
XXX Locore callbacks for mips3, mips4, r4600 cacheflush need more work.
1998-10-01 00:42:37 +00:00
6e32aa4af4
Invert the RXCOPY test. Note that most new platforms will not
...
have relaxed alignment so the de driver should just work on them.
1998-09-29 22:40:52 +00:00
3712546023
Changed to allow the mouse baud rate to be set at kernel compile time.
...
Inspired by Mochida Shuji <mocid@yo.rim.or.jp>.
1998-09-29 02:46:36 +00:00
bf8783afa4
Fix the receive length so it includes the extra bytes in the fddi_header.
1998-09-28 20:37:12 +00:00
43b462df88
Insert the FDDI control bytes in pdq_ifstart before we load the dmamap
...
and dmasync the data. Fix pdq_os_receive_pdu to use PDQ_OS_HDR_OFFSET
instead of PDQ_RX_FC_OFFSET.
1998-09-28 18:01:43 +00:00
a1528c368d
Fix transmit handling (this also should speed up transmits
...
slightly).
1998-09-28 17:13:54 +00:00
b12bfa760e
Make this compile again with no audio but with midi devices.
1998-09-27 16:43:56 +00:00
b2a68e14db
Change sources to be KNF
1998-09-26 19:53:34 +00:00
2cf169c563
Add AdvanSys ULTRA WIDE SCSI controllers
1998-09-26 16:20:31 +00:00
b207a7d09d
Change product ADVSYS 2300 to ADVSYS WIDE
1998-09-26 16:16:23 +00:00
da0a3e615e
Add support for AdvanSys Ultra Wide boards ABP-9xxUW
1998-09-26 16:09:32 +00:00
c6ccd1d83f
Remove Wide boards references
...
Adjust copyright
At this time this driver support the following AdvanSys boards:
- ABP-9xx
- ABP-9xxU
- ABP-9xxUA
1998-09-26 16:02:56 +00:00
4372d4402e
Remove Wide boards references
...
Update supported boards list
1998-09-26 15:52:55 +00:00
1338a7e982
hwreset(): delay required after diddling the medium selection bit.
1998-09-26 08:31:20 +00:00
9d52889ce7
correct obvious typo
1998-09-25 21:50:38 +00:00
1131320f18
Fix transmit underflow messages. (\0128 != \0 128)
1998-09-25 18:06:53 +00:00
ed652e2a09
Fix a silly yank-o.
1998-09-25 14:19:20 +00:00
c31e48b356
Reorder the ne2000devs entries. So all PCMCIA_VENDOR_INVALID and/or
...
PCMCIA_PRODUCT_INVALID entries comes first.
1998-09-23 21:22:41 +00:00
6da4cd8aac
Make dma_sbus.c dependent on dma_sbus attribute.
1998-09-23 08:48:25 +00:00
0c812cb0bc
Regenerate from pcidevs.
1998-09-22 23:00:44 +00:00
de8340f7fd
Add ALI M1531 Host-PCI bridge.
...
Add Cirrus Logic CS4610 and CS4280 Audio chips.
Add Cirrus Logic CS4400 communications controller.
1998-09-22 22:59:02 +00:00
d3e02fc461
Fix the accton support. Only set the board type it isn't an ISV.
1998-09-22 04:23:18 +00:00
7d6c07a559
Use the data32iot and data32ioh members of the wdc_attachment_data
...
structure for 32 bit transfers.
Test for 32 bit capability on data transfers currently restricted to 16 bit
only.
1998-09-22 00:27:51 +00:00
962edcdc03
Add data32iot and data32ioh members to the wdc_attachment_data structure.
...
This bus space tag and handle is used for 32 bit data transfers i.e.
when WDC_CAPABILITY_DATA32 is enabled as the 32 bit data register may
not be part of the standard drive registers.
1998-09-22 00:21:16 +00:00
0b10e1ddab
Parallel port support routines.
1998-09-21 21:26:51 +00:00
f9e261c5e4
LSI63854 based parallel port driver skeleton.
1998-09-21 21:20:47 +00:00
fa25d48556
Add `bpp' device: the parallel port glued onto the LSI64854 DMA controller.
1998-09-21 21:02:23 +00:00
5cc2c570d5
Add missing call to usbd_init().
1998-09-21 20:47:25 +00:00
3ad5f134c3
Regen.
1998-09-21 20:28:48 +00:00
e017934564
Add CS4235 joystick.
1998-09-21 20:25:52 +00:00
07bb8331e8
Roll back to 1.71 version- too many unexplainable problems with 1.72.
1998-09-21 14:53:58 +00:00
ad921921e4
Add softserial to the alpha port. This significantly improved PPP
...
throughput on com ports.
1998-09-21 00:33:16 +00:00
392f960b14
Regenerated .h files to fix "generated from" CVS id.
1998-09-20 21:08:49 +00:00
1c578d0ad2
Added support for a Dayna Communicard E that probes with a
...
different product id (0x2f) than the one we had (0x2d)
1998-09-20 19:19:53 +00:00
08e1d890a4
Changes so that BPF readers will get the data in fddi packet aligned along
...
normal boundaries. This makes tcpdump much happier.
1998-09-20 02:36:08 +00:00
935fbed4fe
Make sure data in FDDI packets are aligned nicely (for alpha, etc.)
1998-09-19 21:21:25 +00:00
24e6cd9435
Map the "backspace" key to "delete" and the "remove" key to
...
"keypad-delete". (This is not completely clean; for me these keys make
up perhaps a "function field", but no "keypad".)
This is the mapping expected by applications.
Proposed by Chris Jones via PR kern/6089 and Dave Sainty.
1998-09-18 15:35:45 +00:00
b85655c706
Use an appropriate value for wpp_quirk_flag.
1998-09-18 14:43:58 +00:00
b03b63aef4
Make these files compile again; no longer necessary to pass
...
iobase to comprobe1.
1998-09-18 14:38:48 +00:00
72fa4aec9b
regen
1998-09-18 10:51:15 +00:00
e630f429ab
Add PCI-VME interfaces: Tundra Universe and Bit3 2706
...
Note that Newbridge is now Tundra
Add Adaptec 7890 & Co.
1998-09-18 10:49:11 +00:00
c797d52571
SCSI_ASYNCREQ turns out to be redundant; we can simply free the scsipi_xfer
...
in scsipi_done() if the transfer is asynchronous. This reduces the size
of the critical section in scsipi_execute_xs() somewhat (in fact,
back to its original size).
1998-09-18 05:53:07 +00:00
9cf43305cf
Define a SCSIPI_XFER_ASYNC macro to test whether a request will be
...
completed asynchronously. Eliminate SCSI_ASYNCREQ, which is actually
redundant information.
1998-09-18 05:45:03 +00:00
e9a20eaff4
Regen.
1998-09-18 04:30:52 +00:00
0cf7fe7c62
Add yet another vendor ID for Fujitsu.
...
Add vendor ID for ESS Technology Inc.
Add product ID for ESS Technology ES1938 SOLO-1 AudioDrive
Add product ID for Fujitsu K56flex LTMODEM
Add product ID for TI PCI1250 PC Card bridge
Add product ID for Trident Cyber 9397 Video controller.
1998-09-18 04:30:10 +00:00
8fdc5aee4b
Make changes as required for new return values from dma setup routine
...
for isp. Unable to test in running kernel because they're not buildable today,
but should be okay.
1998-09-18 00:26:11 +00:00
6d8a22890e
dma setup now returns CMD_QUEUED or CMD_COMPLETE. Clarify a ternary
...
operation that needed some parentheses.
1998-09-17 23:10:20 +00:00
1dac5b5291
Several changes, including some stub fibre target mode stuff. Establish
...
a slightly different fibre startup (print ALPA now too). Change
the way that return values from dma setup is done. Make debug messages
out of some queue overflow situations. Turn PORT LOGGED OUT into
Selection Timeout equivlaent. On isp_restart actions don't blow off
the commands with HBA_BOTCH (XS_DRIVER_STUFFUP) - set them with HBA_BUSRESET
(which is defined as XS_DRIVER_STUFFUP until someone decides whether
the suggested change to the midlayer NetBSD is worthy of inclusion).
1998-09-17 23:05:46 +00:00
a0a31568e8
cleanup header to be just NetBSD, roll rev, change QDEPTH to QAVAIL macro
1998-09-17 22:52:54 +00:00
0e0010df41
cleanup header to be just NetBSD
1998-09-17 22:52:14 +00:00
cb787c768d
add some target mode definitions
1998-09-17 22:51:54 +00:00
24717f3c3a
cleanup header to be just NetBSD
1998-09-17 22:50:53 +00:00
7f72e0eea5
LK201/LK401 support for wscons (only decoding for now).
1998-09-17 20:01:57 +00:00
af9cabdaaa
Add definition for highest legal LK201 keycode.
1998-09-17 19:59:30 +00:00
6f1bc2944f
Adapt to keymap table format change.
1998-09-17 18:31:43 +00:00
ffa2207ec9
wskbd map for LK201/LK401
1998-09-17 18:29:54 +00:00
ad6d798d6a
Move keyboard map from <dev/wscons/wskbdmap_mfii.h> into a _source_ file.
1998-09-17 18:21:04 +00:00
1eda36523a
Add option bit which covers the delta between LK201 and LK401.
1998-09-17 18:16:39 +00:00
fdfd53e5af
Add end mark to list of keymaps.
...
XXX This file will be removed, it is only left until the USB driver
XXX got an own keymap.
1998-09-17 18:14:06 +00:00
ec9b2072bb
Reorganize the list of keyboard maps: no explicite length counter, use
...
an end mark instead. This allows to keep keymaps separate from the drivers
referring to them.
1998-09-17 18:10:53 +00:00
1a9e20e98c
Define a new keyboard eveny type "all keys up". This allows to reduce
...
the amount of statekeeping in drivers for LK201-like keyboards, and it
might be useful to resync after resets or overflows.
(reused the unused WSCONS_EVENT_KEY_OTHER event ID)
Implement the necessary decoding bits.
1998-09-17 18:05:43 +00:00
95807e512a
Garbage collect unused 3rd parameter to comprobe1().
1998-09-16 21:30:58 +00:00
7aa4d4483e
Revert the last change: returning COMPLETE is clearly the wrong thing to do
...
if we weren't polling to begin with.
1998-09-16 05:36:35 +00:00
4963603d0f
Found a race in scsipi_execute_xs(): if an asynchronous transfer completes
...
(probably due to an interrupt) between the time it is scheduled and the
time we get around to setting the SCSI_ASYNCREQ flag, we can lose the xs.
Fix this by checking to see if the transfer has already completed after
the scsi_cmd function returns SUCCESSFULLY_QUEUED, and just return to the
caller if so.
1998-09-16 05:35:50 +00:00
cf10308f5f
bootpath check needs to keep checking for two formats.
1998-09-15 20:26:25 +00:00
e7be3f3601
Fix a problem where txput could "lose" dmamaps if it couldn't actually
...
place the packet into the ring for some reason.
1998-09-15 17:26:46 +00:00
2633c65da5
This commit fixes two bugs in the de driver. The first is that the
...
descriptor count gets miscounted on txprobes. The second (and more
important) is that transmit stalls should now be fixed. The problem
was not due to lack of ring resources but dmamaps. When Jason changed
the driver to use pre-allocated maps (instead of the dynamic ones I
used), and when there were no more maps, the driver just gave up instead
of calling tx_intr to free any transmitted but unreclaimed dma maps.
Since there was nothing being transmitted, no transmit interrupts
would fire to restore things (and OACTIVE prevented other transmits
from happenning). So it stayed starved until another interrupt cause
(like a received packet) "woke" it up.
1998-09-15 02:39:03 +00:00
0af57c2461
Correct a serious problem that affects at least front ends that can only
...
use PIO (or equivalent) code to do asynchronous transfers: In
ncr5380_scsi_cmd(), test to see if the request has been completed after
the call to ncr5380_sched(), and return COMPLETE if so. This avoids
going into an infinite loop in scsipi_execute_xs() while waiting for an
interrupt to trigger completion of the transfer... which, of course,
never happens, since it's already done.
1998-09-14 05:56:14 +00:00
f2c6836685
Fix a problem uncovered when we started to use the pool allocator to manage
...
scsipi_xfer structures.
When scsipi_execute_xs() calls the driver's scsi_cmd function, it assumes
that it can still dereference a pointer to the scsipi_xfer struct. Since
scsipi_done() has already been called, which in turn has called
scsipi_free_xs(), the struct has already been returned the structure to
the pool! In other words, xs->flags has been compromised, but we are still
testing it.
These changes resolve the problem by doing the following:
- In scsipi_execute_xs(), if the hardware driver's scsi_cmd function
returns SUCCESSFULLY_QUEUED, set a new flag (SCSI_ASYNCREQ) in xs->flags.
Since the request will be handled asynchronously, we will need the
scsipi_xfer struct to be freed in scsipi_done().
If the hardware driver's scsi_cmd function returns COMPLETE, we now
simply return any actual errors, or 0 if none occurred. (Previously,
we may have returned EJUSTRETURN, of which the sole effect was to
avoid freeing the scsipi_xfer struct in our caller.)
- In scsipi_done(), only free the scsipi_xfer struct for async requests.
The contents of the struct will otherwise remain valid until the
function that initiated the transfer frees it.
With this change, responsibility for freeing the struct now lies in two
places, depending on the type of the request:
- For synchronous requests, the routine calling scsipi_execute_xs()
must clean up.
- For asynchronous requests, scsipi_done() cleans up (as it always has).
[Note: this change also corrects a problem with sddump(): scsipi_done()
was attempting to return a static scsipi_xfer struct to the pool! Since
dumps are performed synchronously, we now handle this correctly.]
This solution was provided by Jason Thorpe, after I got him to look at
some related (but insufficient) attempts of my own.
1998-09-14 05:49:21 +00:00
10640f1bfc
Fix a problem uncovered when we started to use the pool allocator to manage
...
scsipi_xfer structures.
When scsipi_execute_xs() calls the driver's scsi_cmd function, it assumes
that it can still dereference a pointer to the scsipi_xfer struct. Since
scsipi_done() has already been called, which in turn has called
scsipi_free_xs(), the struct has already been returned to the pool! In
other words, xs->flags has been compromised, but we are still testing it.
These changes resolve the problem by doing the following:
- In scsipi_execute_xs(), if the lower-level driver's scsi_cmd function
returns SUCCESSFULLY_QUEUED and SCSI_NOSLEEP is set in xs->flags, set a
new flag (SCSI_ASYNCREQ). This indicates that scsipi_done() should free
the scsipi_xfer struct.
If the lower-level driver's scsi_cmd function returns SUCCESSFULLY_QUEUED
but SCSI_NOSLEEP is not set, we wait (via tsleep()) for the request to
complete, then fall through to the COMPLETE case.
If the lower-level driver's scsi_cmd function returns COMPLETE, we now
simply return any actual errors, or 0 if none occurred. (Previously,
we may have returned EJUSTRETURN, of which the sole effect was to
avoid freeing the scsipi_xfer struct in our caller. No code seems
to depend on this behavior, however.)
- In scsipi_done(), only free the scsipi_xfer struct for async requests.
The contents of the struct will otherwise remain valid until the
function that initiated the transfer frees it.
With this change, responsibility for freeing the struct now lies in two
places, depending on the type of the request:
- For synchronous requests, the routine calling scsipi_execute_xs()
must clean up.
- For asynchronous requests, scsipi_done() cleans up (as it always has).
[Note: this change also corrects a problem with sddump(): scsipi_done()
was attempting to return a static scsipi_xfer struct to the pool! Since
dumps are performed synchronously, we now handle this correctly.]
This solution was provided by Jason Thorpe, after I got him to look at
some related (but insufficient) attempts of my own.
1998-09-14 05:49:20 +00:00
38aa357963
Make sure the buffers are synchronized on open.
1998-09-13 06:30:25 +00:00
32f42fe1e9
Make sure all voices are deallocated on close.
1998-09-13 04:41:34 +00:00
cd65bcf1db
Regen.
1998-09-12 21:49:51 +00:00
0b009ef925
Add support for the OPTi Audio 16 IDE controller.
1998-09-12 21:48:57 +00:00
3e6930640f
PnP IDE controllers can pass us the regions in any order, so make sure
...
that sc_ad.ioh is the 8-byte region as opposed to blindly passing it
the first region.
With this change, and a device def which will follow, the IDE controller
on my OPTi Audio 16 card works!
1998-09-12 21:40:22 +00:00
03e28bdbaf
keren/6128: add an entry for the TDC 4200. Full density code set isn't known.
1998-09-11 20:10:15 +00:00
ea4898c76c
Add arc as a target platform.
1998-09-11 19:39:28 +00:00
d1e0ee615b
Regen
1998-09-10 19:57:20 +00:00
537261f6c5
Reorganize the probe routine and add a quirk table. Much of this code
...
comes from Enami Tsugutomo (enami@but-b.or.jp ). Also add a couple more
devices to the pcmcia devices table.
1998-09-10 19:55:30 +00:00
9539399333
Add support for passing device quirks from the attachment routine,
...
and add support for a NO_EXTRA_RESETS quirk (required by the TEAC
IDE Card/II, which the Vaio uses).
1998-09-10 19:24:45 +00:00
4a1ccd2fe7
turn into a debug message an ABOUT F/W failure. Add ISPCTL_UPDATE_PARAMS isp_control case
1998-09-10 17:10:27 +00:00
9ce5ae6b97
Protect Debugger() call a'la uha driver. PR #6070 , Gary D. Duzan.
1998-09-09 05:28:58 +00:00
d1fba4e7e5
Don't use M_WAITOK to allocate the ring buffer; we could be in interrupt
...
context. Reported by Lennart Augustsson.
1998-09-09 05:17:53 +00:00
4f9a0d0550
Add mmap support for gus and gusmax, PR #5988 , Feico Dillema.
1998-09-09 04:40:34 +00:00
8fec1fd696
add bustype tag to softc
1998-09-08 07:36:26 +00:00
5c5c3f792f
Reflect changes in quirk flags, and also now add case post retrieval
...
of Inquiry data during probe where SDEV_NOSYNC, SDEV_NOTAG and SDEV_NOWIDE
can be set (with quirk data overriding) per device probed.
1998-09-08 07:34:02 +00:00
3805d4f082
Clarify quirk flags somwhat- split SDEV_NOSYNCWIDE into SDEV_NOSYNC and
...
SDEV_NOWIDE and add SDEV_NOTAG.
1998-09-08 07:32:42 +00:00
52588e4fde
add more general probe to regular more operation stuff
1998-09-08 07:30:32 +00:00
a79310ba38
Major reworking of initialization code, addition of NVRAM reading, usage
...
of device speed updating, etc... A lot of FC and other case statement
handling. Whew. Too much to really detail here.
1998-09-08 07:28:50 +00:00
6e2341ae63
Roll major revision. Change some definitions around. Add more current device
...
state stuff. Make DPARM flags full 16 bits (no shifting needed) and add
the 2 new ones for the 7.55 f/w.
1998-09-08 07:27:04 +00:00
542648bf0e
Move all ASYNC definitions here (after all, they're mailbox registers).
...
Clarify FC initialization control block. Add macros for setting WWN
into same. Add a wad more definitions in this area.
1998-09-08 07:24:23 +00:00
170521610e
Add more ASYNC event codes here. Add NVRAM definitions.
1998-09-08 07:22:06 +00:00
c0eabb441f
add case for going from probetime to runtime speeds
1998-09-08 07:19:58 +00:00
9752520872
roll revision, change default tagging to simple tags
1998-09-08 07:18:56 +00:00
9b29429984
Remove clocks as common code now can determine what clock rates to use.
...
Remove other than 8 byte bursts- until we clarify whether or not buggy
PCI implementatiosn really cause problems.
1998-09-08 07:16:46 +00:00
4275b01a08
Adjust copyright notice to reflect that Qlogic still owns this.
...
Move SCSI f/w to 7.55 level. Move FibreChannel f/w to 1.13 level.
1998-09-08 07:13:11 +00:00
0456723423
Adjust copyright to reflect that this is really still owned by Qlogic
1998-09-08 07:06:57 +00:00
73ac88b3ed
make the default disklabel consistent to the SCSI/ATAPI case
1998-09-07 21:28:22 +00:00
3d396754e1
Regen.
1998-09-07 08:19:31 +00:00
7e2e241a81
Fix capitalization of Kodak. This change was clearly never tested.
1998-09-07 08:18:40 +00:00
af17d22848
Missing bits in DEBUG mode.
1998-09-07 07:58:45 +00:00
199e474e95
Removed some spurious `long's.
1998-09-06 22:43:16 +00:00
b871ab5f2c
Use the new "%b" format for the various control register bits.
1998-09-06 21:39:33 +00:00
c5b834a5bc
Do it right for a change.
1998-09-06 21:23:58 +00:00
b9ce59191d
Oops. Fix overenthusiastic macro.
1998-09-06 21:21:06 +00:00
adebee9ad7
Regen.
1998-09-06 17:27:40 +00:00
25eaf86126
Add the Brooktree 878 and 879 id's and fix the comment of the 849 entry.
1998-09-06 17:26:03 +00:00
1247373b7a
Correct the remaining uses of ad1848_softc to ad1848_isa_softc
1998-09-06 13:03:49 +00:00
06f777a3fe
Debug output updates (Ezra Story; PR#6108).
1998-09-06 11:06:52 +00:00
7991c56b93
Use `ad1848_isa_{open|close}' (Ezra Story; PR#6108).
1998-09-06 11:05:21 +00:00
484ce04810
The `address' field from the prom is really an unsigned 32-bit value.
...
Make it so.
1998-09-05 22:29:49 +00:00
c05097f947
Remove function name conflict.
1998-09-05 22:14:25 +00:00
18da157aa9
Assign my copyrights to TNF.
1998-09-05 17:28:57 +00:00
fc5e533cc2
Relinquish my copyright claim on this file.
1998-09-05 17:23:09 +00:00
42ebb851c5
sparc64 uses more of this file.
1998-09-05 16:47:06 +00:00
9d8e954403
Regen.
1998-09-05 15:46:08 +00:00
127efe1a4d
Fix typo.
1998-09-05 15:45:34 +00:00
d8e5a87d76
Regen.
1998-09-05 15:42:42 +00:00
b0e65e8371
Regen.
1998-09-05 15:42:41 +00:00
f7f5af21fb
Add Kodak DC260 camera.
1998-09-05 15:42:12 +00:00
bd52ba3c5a
Assign copyright to TNF.
1998-09-05 14:42:05 +00:00
344ed1eaef
Assign copyright to TNF.
1998-09-05 14:20:01 +00:00
236611ac0b
Regen.
1998-09-05 14:18:04 +00:00
c7a4282124
Assign copyright to TNF.
1998-09-05 14:12:36 +00:00
ba8c6b9828
arm32 now supports soft serial interrupts.
1998-09-05 04:25:35 +00:00
a3ee69c87a
Split SMC chipset ARCnet driver into
...
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
453b195c4d
Can't use pckbc_enqueue_cmd() in attach() because pckbc's initialization
...
is not yet completed, have to use pckbc_poll_cmd() instead.
1998-09-02 20:01:15 +00:00
b43e33a471
Since the RAMDAC drivers use the !=0-ness of fields for diagnostic
...
purposes, we have to zero-initialize the tga_devconfig structure.
1998-09-02 19:51:06 +00:00
fd97cb265c
typo for non-SCSIVERBOSE case
1998-09-02 02:18:48 +00:00
enami