749715f6ee
Use aprint_*().
2003-01-31 00:26:25 +00:00
7ec10e2d99
Use aprint_*().
2003-01-31 00:07:39 +00:00
ac9d761168
The introduction of FAS366 support annihilated the `reselect-while-selecting'
...
workaround for the ESP100 variant.
2003-01-30 11:03:45 +00:00
2051b2d8e7
Don't set LDF_ENABLED unless the device is really okay. Noted by
...
Andrew Doran.
2003-01-29 16:50:37 +00:00
1cd881c271
Set RTK_ENABLE flag when it attached. This fixed multicast problem.
...
Found by FUKAUMI Naoki <naoki@fukaumi.org>.
2003-01-29 12:57:36 +00:00
fbf74eae32
regen
2003-01-29 03:55:34 +00:00
dc1b785a6e
NETGEAR FA120 (USB 2.0 Fast Ethernet Adapter)
2003-01-29 03:54:05 +00:00
9115df8c49
success, not sucess. Noted by mjl.
2003-01-28 22:35:02 +00:00
7bd6fd354d
unknown, not unkown. Noted by mjl.
2003-01-28 22:19:22 +00:00
8f87fa74eb
Fix printf format warnings in previous.
2003-01-28 18:16:18 +00:00
be1188e00d
Provide locking required by the interrupt handlers running at IPL_SERIAL.
2003-01-28 12:35:31 +00:00
e45b3e7121
Apply BUS_DMA_NOCACHE for the buffers in the case of 440MX. The
...
code was provided by DHOYASHIKI Shinichi in kern/19919, and
address kern/19435.
2003-01-28 02:09:34 +00:00
6bae70db81
Also save status info in the user command packet.
2003-01-27 23:31:19 +00:00
a1f27a3f79
Bump WDCC_IDENTIFY timeout to 3 seconds, as required by some drives.
...
Reported by Karl Janmar <karlj@mdstud.chalmers.se> on tech-kern.
2003-01-27 21:27:52 +00:00
4155034751
G/C something left over from an earlier version of this code.
2003-01-27 20:18:11 +00:00
182716ac88
Attach to PNP0F03 -- makes the PS/2 mouse on this Dell work.
2003-01-27 19:18:46 +00:00
0e0c2ae01d
Remove revision in quirk entry for TOSHIBA XM-4101TASUNSLCD. The same drive with a newer revision also fails, so assume all revisions are bad until proven otherwise. Should fix PR kern/19912.
2003-01-27 18:55:24 +00:00
3381232270
Experimental support for RAID volumes configured by ATA "RAID" controllers.
...
Such RAID controllers are actually just IDE controllers with a BIOS that
can create RAID volumes and write the configuration info to config blocks
on the disks. The BIOS can do I/O to these volumes, and the OS must
understand the config blocks and implement RAID in software in order to be
able to use these volumes.
Only SPAN (simple concatenation) and RAID0 are supported at this time,
and writing back config blocks is also not supported at this time. Currently,
only the Promise configuration scheme is supported, although supporting
the Highpoint scheme should not be too difficult.
In any case, this is sufficient to use the Promise RAID0 volume (thus
preserving the win2k AS installation) on this new Intel server I have.
Thanks to Soren Schmidt for doing the work in FreeBSD; it made this
task much easier. The config block parsing code is adapted from his
work.
2003-01-27 18:21:23 +00:00
934e3c5a47
Set a value for MISCOUT register correctly in vga_setup_regs().
2003-01-27 15:27:44 +00:00
289b9289f3
const'ify.
2003-01-27 15:22:47 +00:00
89b4d6221e
- Replace some magic numbers with proper macro.
...
- Use vga_6845_{read,write}() defined in pcdisplayvar.h and
remove vga_crtc_{read,write}() macros in vgareg.h.
2003-01-27 15:16:10 +00:00
862013bb51
- Use u_int8_t instead of char for register structure.
...
- Define MC6845_NREGS like vgareg.h.
2003-01-27 14:53:33 +00:00
a8c7515f5f
KNF and space/TAB cleanup.
2003-01-27 14:46:10 +00:00
1e6d7bcb87
Use PRId64 for daddr_t in a DPRINTF.
2003-01-27 13:06:38 +00:00
0cb4c95848
Ops, initialise len before using it.
...
Also, the minimum frame len is ETHER_MIN_LEN - ETHER_CRC_LEN.
2003-01-27 10:35:08 +00:00
8dc5018716
If the upper-layer provides a geometry, use it.
2003-01-27 02:43:30 +00:00
902dd8b54d
Undo last (not supposed to be committed).
2003-01-27 00:32:44 +00:00
b091df0ed2
regen (CANOSCAN N670U).
2003-01-27 00:31:01 +00:00
4307232850
Add CANON N670U scanner id.
2003-01-27 00:29:31 +00:00
d577246bde
Regen.
2003-01-26 19:35:52 +00:00
339056bf8f
Add podule id for NET100 card.
2003-01-26 19:35:04 +00:00
ee04df9a4d
Add support for Am79C87[45].
2003-01-26 06:25:08 +00:00
5ade701481
Regen.
2003-01-26 06:21:03 +00:00
b9f79bf02f
Add AMD Am79C87[45] (which use the Altima OUI).
2003-01-26 06:20:30 +00:00
bbb601497d
Fix further printf format warnings for DEBUG, in the wake of daddr_t
...
having changed.
2003-01-25 23:18:46 +00:00
4e0e5333ae
Fix further printf format warnings for DEBUG, in the wake of daddr_t
...
having changed.
2003-01-25 23:00:09 +00:00
5067836b9e
Use PRId64 instead of hard coding "%lld" to fix build problems under
...
LP64 ports.
2003-01-25 18:12:31 +00:00
63dda858c6
Fix printf() format strings problems caused by "daddr_t" change.
2003-01-25 12:50:38 +00:00
f57bacfc63
Add a couple more Promise ATA133 controllers.
2003-01-25 04:45:24 +00:00
a22484a1ea
zs_shutdown: lower IPL before sleeping. Also note the fact that the
...
effectiveness of that very tsleep() call is dubious at best.
2003-01-24 20:46:45 +00:00
ae5c422a40
Regen; Tweak a Promise description.
2003-01-24 17:47:17 +00:00
de5fb86d32
Tweak a Promise description.
2003-01-24 17:46:51 +00:00
54e4cb1a6c
fix kernel build error, such a configs w/o kbd, ms.
...
(approved by martin)
2003-01-24 16:54:34 +00:00
b3ffb6e4ab
* Enable Ultra133 on the NVIDIA nForce 2.
...
* Make sure to test for PCI_VENDOR_AMD before testing for any
AMD products.
2003-01-24 05:51:04 +00:00
fdedc91f87
Regen; add some more Promise products.
2003-01-24 05:34:25 +00:00
5a31d135b0
Add some more Promise products.
2003-01-24 05:33:12 +00:00
b3b68a3ced
Sort the Promise entries.
2003-01-24 05:18:56 +00:00
f6cc829138
Add support for the NVIDIA nForce ATA100 and nForce2 ATA133
...
IDE controllers, which are more-or-less compatible with the
AMD controllers.
XXX Need to determine the correct timing value for the nForce2
XXX at Ultra133, so we cap it at Ultra100, for now.
2003-01-24 04:53:13 +00:00
34461a3ff9
Regen; add Nvidia nForce2 ATA133 IDE.
2003-01-24 03:16:08 +00:00
8204d0458d
Add Nvidia nForce2 ATA133 IDE product ID, and shuffle some
...
Nvidia entries around a little.
2003-01-24 03:15:04 +00:00
thorpej