Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
55,669 Commits 606 Branches 0 Tags 3.1 GiB
7460a0be93
Commit Graph

5775 Commits

Author SHA1 Message Date
mhitch
7460a0be93 Set sc_cfg3_fscsi for the AMD53C974 to match the change in ncr53c9x.c. 1999-09-22 03:32:00 +00:00
mhitch
636de81487 Define config register 3 values for NCR53C9x/FAS216. 
Add sc_cfg3_fscsi to the softc and use it to set the chip into Fast SCSI
mode for the chips that use it.
 1999-09-22 03:31:23 +00:00
ragge
3455a353f9 Fix minphys() on vax. While here, convert to bus.h. 1999-09-21 18:07:54 +00:00
enami
e7daddb730 fold long line and kill empty line at the end of file. 1999-09-21 03:39:37 +00:00
enami
31e6da77de Calculate the correct device minor of the first partition. 1999-09-21 03:10:00 +00:00
danw
6775e175ca Add a brief delay after resetting the card before checking to see if 
it's done resetting. Trying to read registers off the card while it's
unresponsive can cause a machine check on some platforms/busses.
 1999-09-21 01:04:44 +00:00
thorpej
30651e46b3 A couple more hacks for the Lite-On PNIC: 
- Only use 16 longword bursts.
- Reset the interface for receive filter setups that don't come from
  the reset path.

Hi, Jason is getting really tired of broken clone chips, and really wishes
real 21140 boards were still available, because the DEC chips seem to work
Just Dandy.
 1999-09-21 00:14:54 +00:00
thorpej
5ada26d247 Remove the has-mii-doesn't-have-mii OPMODE block from tlp_init(), and 
let the pre-init hook and media switch routines handle it all.
 1999-09-20 19:52:31 +00:00
thorpej
28b026bee1 Remove special-case 2114x-set-OPMODE_MBO; it's done in the pre-init hook 
now.
 1999-09-20 19:34:08 +00:00
thorpej
664d8da4f5 Add support for the DECchip 21041. This also adds some preliminary 
support for the ISV SROM format used in the 2114{1,1A,2,3}.  Note, like
the 21040, auto-sense is not yet supported for the 21041.

Add a "pre-init" hook, which will be used for the 2114x and PNIC (currently)
which allows chip-specific code to set up and write OPMODE before the
chip is reset.  This is necessary in order for the chip's internal
pathways to get initialized properly for MII/SYM/PCS/SIA media attachments.

Thanks to Dave Sainty for the hint from the `de' driver that inspired the
pre-init hook.
 1999-09-20 19:26:54 +00:00
thorpej
6961f081e5 Fix packet reception in promiscuous mode: compare the Ethernet destination 
address against our station address if it's not a multicast packet.  Either
the Rhine manual lies about the phys/broadcast/multicast rxstatus bits,
or the Rhine chip is just broken.

Fixes a redirect storm problem reported by Laine Stump on current-users.
 1999-09-20 17:40:58 +00:00
nisimura
1f50d00cc1 Add one new dispaly type for DEC TC TX 8/24bpp framebuffer. Currently acts 
as an 8bpp pseudo color device.
 1999-09-20 06:29:06 +00:00
nathanw
3598bf5251 Add NOLUNS quirk for another Texel CD-ROM revision. 1999-09-19 23:45:28 +00:00
ad
598dcad691 When moving the software cursor on an inactive screen, save character and 
attribute from backing store, not display adapter.
 1999-09-19 23:00:04 +00:00
matt
a6d751c35c One more change for bigendian machines. 1999-09-19 22:58:31 +00:00
ad
97253f4537 Software cursor is not enabled at boot time. Hardware cursor is. 1999-09-19 22:57:24 +00:00
matt
9ac5036f93 Make the DEFPA run under the macppc port (tested on a B&W G3). Add it to 
the GENERIC config file.
 1999-09-19 22:02:37 +00:00
ad
f96e055d70 - mc6845's cursor is disabled by punching bit 6 of cursor start register. 
- Add new option (PCDISPLAY_SOFTCURSOR) that provides a large, non-blinking
  cursor in software.
 1999-09-19 21:48:08 +00:00
thorpej
5485bcb973 Fix a buglet in tlp_reset(): don't touch the Tulip for at least 50 
PCI cycles after starting the reset; it won't respond.  This will
cause a machine check on some Alpha core logic chipsets (e.g. 21071 APECS).
 1999-09-19 20:51:09 +00:00
drochner
fa13e8eb92 set odd parity for the serial line 
(done by directly setting zilog chip control bits -- there should be
a zs_set_frame() or so in z8530sc.c)
fixes PR port-alpha/8423 by Konrad Schroder <perseant@hhhh.org>
 1999-09-19 14:45:47 +00:00
augustss
fb7795c908 Make sure the HC deactivation is propagated. 1999-09-18 11:25:50 +00:00
scw
d1c5384e9a Minor optimisation. 1999-09-18 09:45:05 +00:00
ad
91723eaf32 Regen. 1999-09-18 01:46:25 +00:00
ad
697eb331c5 Ammend some entries. 1999-09-18 01:46:01 +00:00
thorpej
9002796d07 If the interface is not marked as running, abort tlp_intr() early. 1999-09-17 21:57:36 +00:00
thorpej
79f938f5f8 Fix a few buglets in the multi-port 21040 code. ZNYX ZX314 confirmed 
working now.
 1999-09-17 21:55:01 +00:00
ad
54943e8584 - Collapse forward and reverse cases in rasops_copyrows() into one 
- Pull in opt_rasops.h so we know if clipping is enabled
- Some KNF
 1999-09-17 00:22:07 +00:00
ad
da0cbab431 Clean up attribute allocation some more. 1999-09-17 00:09:34 +00:00
augustss
97a24aa488 Make defines follow the standard. 1999-09-16 21:53:58 +00:00
drochner
61ab682f29 set baudrate before talking to the keyboard (in non-console case) 
from Konrad Schroder per PR port-alpha/8422
 1999-09-16 19:39:05 +00:00
augustss
a4457e18b3 More DIAGNOSTIC paranoia. 1999-09-16 19:20:34 +00:00
jdolecek
61cf56ebf2 introduce new variable wsdisplay_defaultscreens (initialized to 
WSDISPLAY_DEFAULTSCREENS or 0 if it's not defined) and use it instead
of WSDISPLAY_DEFAULTSCREENS as approptiate, so that number of screens
added on bootup is patchable

move printing of info about added screen into separate routine and
print just one message for all screens added in wsdisplay_common_attach(),
such as:
	wsdisplay0: screen 1-7 added (80x25, vt100 emulation)

while here, do minor const poisoning

Reviewed by: drochner
Tested by: jdolecek
 1999-09-16 18:16:51 +00:00
soren
6c591e77d0 Fix botched RCS IDs. 1999-09-16 05:58:18 +00:00
augustss
09774ca21c Remove one, add none! 1999-09-15 21:14:44 +00:00
augustss
2557320246 Handle the case when a USB transfer is so long that it crosses two page 
(4K) boundaries.  OHCI cannot do that with a single TD so we make a chain.
 1999-09-15 21:14:03 +00:00
augustss
7fcc1703ff Cosmetic change: s/xfer/data/ 1999-09-15 21:12:29 +00:00
augustss
80e09c28e9 Use a bigger buffer when transferring data. 1999-09-15 21:11:27 +00:00
augustss
58c7de99c1 Move the code around a little and clearly mark how to delay attachment 
(during cold boot) until the interrupts are on.
 1999-09-15 21:10:11 +00:00
augustss
5260cadff2 Add a sanity check to the computed actual transfer length. 1999-09-15 21:08:59 +00:00
augustss
d4f0eac72e Change SPLUSBCHECK diagnostic macro a little. 1999-09-15 21:08:19 +00:00
augustss
e54df1b10c Handle the use_polling flag with a lttle more care and only set it if 
we are cold booting.
 1999-09-15 14:17:14 +00:00
augustss
60199e09b6 Regen. 1999-09-15 13:57:26 +00:00
augustss
df70e460db Make vendor names more consistent. 1999-09-15 13:57:09 +00:00
augustss
adc55421b4 Regen. 1999-09-15 12:31:28 +00:00
augustss
f14a3915b3 Add a number of devices and rename a few. From a Linux web site. 1999-09-15 12:30:59 +00:00
augustss
7049e8eb1b Add preliminary (untested) code for detaching the USB host controller 
(needed for CardBus based controllers).
 1999-09-15 10:25:30 +00:00
thorpej
f23c7a31b4 Make sure 21040 chips are at least pass 2.0 and that 21140 chips are at 
least pass 1.1.
 1999-09-14 23:43:10 +00:00
thorpej
70997fd3d5 Move the PCI device number to the base Tulip softc; it will be needed to 
decode the SROM on 21041 and 2114x multi-port boards.
 1999-09-14 23:33:04 +00:00
thorpej
2def4fdb50 Apparently can't really look at excessive collitions and late collisions 
in completed transmit descriptors.  These seem to be set even on successful
packet transmissions on my AlphaStation 500's 21040.
 1999-09-14 23:23:32 +00:00
thorpej
5c34356d4c First crack at shared ROM/shared interrupts on 21040 multi-port boards, 
plus quirk identification for non-multiple-port boards.
 1999-09-14 22:25:48 +00:00