Focus: Bug fixes
Severity: Medium
This is a recommended upgrade.
This release updates sys_rootdisp and sys_jitter calculations to match the
RFC specification, fixes a potential IPv6 address matching error for the
"nic" and "interface" configuration directives, suppresses the creation of
extraneous ephemeral associations for certain broadcastclient and
multicastclient configurations, cleans up some ntpq display issues, and
includes improvements to orphan mode, minor bugs fixes and code clean-ups.
New features / changes in this release:
ntpd
* Updated "nic" and "interface" IPv6 address handling to prevent
mismatches with localhost [::1] and wildcard [::] which resulted from
using the address/prefix format (e.g. fe80::/64)
* Fix orphan mode stratum incorrectly counting to infinity
* Orphan parent selection metric updated to includes missing ntohl()
* Non-printable stratum 16 refid no longer sent to ntp
* Duplicate ephemeral associations suppressed for broadcastclient and
multicastclient without broadcastdelay
* Exclude undetermined sys_refid from use in loopback TEST12
* Exclude MODE_SERVER responses from KoD rate limiting
* Include root delay in clock_update() sys_rootdisp calculations
* get_systime() updated to exclude sys_residual offset (which only
affected bits "below" sys_tick, the precision threshold)
* sys.peer jitter weighting corrected in sys_jitter calculation
ntpq
* -n option extended to include the billboard "server" column
* IPv6 addresses in the local column truncated to prevent overruns
---
NTP 4.2.6p4 (Harlan Stenn <stenn@ntp.org>, 2011/09/22)
Focus: Bug fixes and portability improvements
Severity: Medium
This is a recommended upgrade.
This release includes build infrastructure updates, code
clean-ups, minor bug fixes, fixes for a number of minor
ref-clock issues, and documentation revisions.
Portability improvements affect AIX, HP-UX, Linux, OS X and 64-bit time_t.
New features / changes in this release:
Build system
* Fix checking for struct rtattr
* Update config.guess and config.sub for AIX
* Upgrade required version of autogen and libopts for building
from our source code repository
ntpd
* Back-ported several fixes for Coverity warnings from ntp-dev
* Fix a rare boundary condition in UNLINK_EXPR_SLIST()
* Allow "logconfig =allall" configuration directive
* Bind tentative IPv6 addresses on Linux
* Correct WWVB/Spectracom driver to timestamp CR instead of LF
* Improved tally bit handling to prevent incorrect ntpq peer status reports
* Exclude the Undisciplined Local Clock and ACTS drivers from the initial
candidate list unless they are designated a "prefer peer"
* Prevent the consideration of Undisciplined Local Clock or ACTS drivers for
selection during the 'tos orphanwait' period
* Prefer an Orphan Mode Parent over the Undisciplined Local Clock or ACTS
drivers
* Improved support of the Parse Refclock trusttime flag in Meinberg mode
* Back-port utility routines from ntp-dev: mprintf(), emalloc_zero()
* Added the NTPD_TICKADJ_PPM environment variable for specifying baseline
clock slew on Microsoft Windows
* Code cleanup in libntpq
ntpdc
* Fix timerstats reporting
ntpdate
* Reduce time required to set clock
* Allow a timeout greater than 2 seconds
sntp
* Backward incompatible command-line option change:
-l/--filelog changed -l/--logfile (to be consistent with ntpd)
Documentation
* Update html2man. Fix some tags in the .html files
* Distribute ntp-wait.html
---
NTP 4.2.6p3 (Harlan Stenn <stenn@ntp.org>, 2011/01/03)
Focus: Bug fixes and portability improvements
Severity: Medium
This is a recommended upgrade.
This release includes build infrastructure updates, code
clean-ups, minor bug fixes, fixes for a number of minor
ref-clock issues, and documentation revisions.
Portability improvements in this release affect AIX, Atari FreeMiNT,
FreeBSD4, Linux and Microsoft Windows.
New features / changes in this release:
Build system
* Use lsb_release to get information about Linux distributions.
* 'test' is in /usr/bin (instead of /bin) on some systems.
* Basic sanity checks for the ChangeLog file.
* Source certain build files with ./filename for systems without . in PATH.
* IRIX portability fix.
* Use a single copy of the "libopts" code.
* autogen/libopts upgrade.
* configure.ac m4 quoting cleanup.
ntpd
* Do not bind to IN6_IFF_ANYCAST addresses.
* Log the reason for exiting under Windows.
* Multicast fixes for Windows.
* Interpolation fixes for Windows.
* IPv4 and IPv6 Multicast fixes.
* Manycast solicitation fixes and general repairs.
* JJY refclock cleanup.
* NMEA refclock improvements.
* Oncore debug message cleanup.
* Palisade refclock now builds under Linux.
* Give RAWDCF more baud rates.
* Support Truetime Satellite clocks under Windows.
* Support Arbiter 1093C Satellite clocks under Windows.
* Make sure that the "filegen" configuration command defaults to "enable".
* Range-check the status codes (plus other cleanup) in the RIPE-NCC driver.
* Prohibit 'includefile' directive in remote configuration command.
* Fix 'nic' interface bindings.
* Fix the way we link with openssl if openssl is installed in the base
system.
ntp-keygen
* Fix -V coredump.
* OpenSSL version display cleanup.
ntpdc
* Many counters should be treated as unsigned.
ntpdate
* Do not ignore replies with equal receive and transmit timestamps.
ntpq
* libntpq warning cleanup.
ntpsnmpd
* Correct SNMP type for "precision" and "resolution".
* Update the MIB from the draft version to RFC-5907.
sntp
* Display timezone offset when showing time for sntp in the local
timezone.
* Pay proper attention to RATE KoD packets.
* Fix a miscalculation of the offset.
* Properly parse empty lines in the key file.
* Logging cleanup.
* Use tv_usec correctly in set_time().
* Documentation cleanup.
---
NTP 4.2.6p2 (Harlan Stenn <stenn@ntp.org>, 2010/07/08)
Focus: Bug fixes and portability improvements
Severity: Medium
This is a recommended upgrade.
This release includes build infrastructure updates, code
clean-ups, minor bug fixes, fixes for a number of minor
ref-clock issues, improved KOD handling, OpenSSL related
updates and documentation revisions.
Portability improvements in this release affect Irix, Linux,
Mac OS, Microsoft Windows, OpenBSD and QNX6
New features / changes in this release:
ntpd
* Range syntax for the trustedkey configuration directive
* Unified IPv4 and IPv6 restrict lists
ntpdate
* Rate limiting and KOD handling
ntpsnmpd
* default connection to net-snmpd via a unix-domain socket
* command-line 'socket name' option
ntpq / ntpdc
* support for the "passwd ..." syntax
* key-type specific password prompts
sntp
* MD5 authentication of an ntpd
* Broadcast and crypto
* OpenSSL support
---
NTP 4.2.6p1 (Harlan Stenn <stenn@ntp.org>, 2010/04/09)
Focus: Bug fixes, portability fixes, and documentation improvements
Severity: Medium
This is a recommended upgrade.
- fix bad security practices: {msyslog,syslog,printf}(buffer) ->
{msyslog,syslog,printf}("%s", buffer)
- use an anonymous union to avoid type punning casts
- re-order expression to avoid integer overflow
Push -Wno-array-bounds down to the cases that depend on it.
Selectively disable warnings for 3rd party software or non-trivial
issues to be reviewed later to get clang -Werror to build most of the
tree.
"foo > bar" fails when bar is mode 444, and files copied from the
source tree should be expected to perhaps be read only. However, the
copy should have been removed when the sed was added. And, it never
should have been "@"; suppressing it made debugging this harder than
it should have been.
#ifdef inside the macro arguments is undefined behaviour (pcc reports
a syntax error)
This was fixed upstream so change this to be the same as the 4.2.6p3
stable release of ntp (can't find an actual changelog entry that
describes this, so have included the memcpy change also - memmove
is not required here)
forth. This resolves CVE-2009-3563, but it should be noted that nobody uses
this code so far, so this is more of a preventive update than a security
one.
