f7d76b1062
bcmp -> memcmp.
2002-05-22 16:03:14 +00:00
f3082cc970
Call rlreset() per controller, not per disk.
...
Be more informative about the state of the disk (locked, unloaded etc...)
Send NULL as proc pointer to bus_dma_load if B_PHYS is not set.
Break out softc's from rl.c to rlvar.h for inclusion elsewhere.
2002-03-23 18:12:09 +00:00
31144d9976
Convert ioctl code to use EPASSTHROUGH instead of -1 or ENOTTY for
...
indicating an unhandled "command". ERESTART is -1, which can lead to
confusion. ERESTART has been moved to -3 and EPASSTHROUGH has been
placed at -4. No ioctl code should now return -1 anywhere. The
ioctl() system call is now properly restartable.
2002-03-17 19:40:26 +00:00
ac36f7cb2c
bring in latest ALTQ from kjc. ALTQify some of the drivers.
2002-03-05 04:12:57 +00:00
f89bb3064e
Move the dz driver to dev/dec, since it can be shared with pmax.
2002-02-25 14:58:06 +00:00
72f2d1c3a3
#endif ... -> #endif /* ... */
2001-12-06 10:28:40 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
a3746e00b7
add RCSIDs
2001-11-13 07:11:12 +00:00
adc0050e52
Trying to get these files out of Attic.
2001-08-16 14:56:30 +00:00
988a8d9aa1
Trying to get files out of Attic.
2001-08-16 14:55:32 +00:00
3f9984fc90
`existent', not `existant'
2001-06-19 13:42:07 +00:00
d9db68b3fe
be more specific about which interlan controller the qbus/if_il supports
2001-06-13 06:40:19 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
01c6253206
Only use b_proc if B_PHYS is set.
2001-06-10 18:41:27 +00:00
41faed1386
Use cdev_decl() instead of local prototyping.
2001-05-26 21:24:38 +00:00
59b29023fd
Update the TS11 driver to useable state.
...
Thanks to Michael Kukat for providing a machine to test this driver.
2001-05-13 15:32:40 +00:00
f66126b9f0
Moved from sys/arch/vax/uba/.
2001-05-13 15:30:10 +00:00
637bffc245
Add bus type to softc.
2001-05-13 15:23:37 +00:00
816247df06
Add il, dmc, ts and if_uba.
2001-05-06 17:37:52 +00:00
09a79adad2
Driver for the DMC-11/DMR-11 DDCMP interface, (untested) from 4.4BSD.
2001-05-06 17:36:04 +00:00
7026635893
Driver for the Interlan NI1010 Ethernet Controller, from 4.4BSD.
2001-05-06 15:30:46 +00:00
93011fb5f6
Use if_uba + ether_ioctl routines. Removed ~150 lines of duplicated code.
2001-05-06 15:27:48 +00:00
9b9db3a6bd
Back from the dead, but now changed to use the bus_dma interface.
...
Still to do:
- ubaresets
- BDP handling
2001-05-06 15:21:44 +00:00
2963ff5c58
Add `l_poll' to `struct linesw' and provide an xxxpoll() entry point
...
in each tty driver to indirect through it.
This allows tty line-disciplines to handle poll(2) system calls.
2001-05-02 10:32:08 +00:00
c3736bf111
Use ubmemalloc() for data structures. Remove unused vars. KNF.
2001-04-29 12:32:18 +00:00
a7d2fe8275
Use uballoc()/ubmemalloc() for data structure allocation.
2001-04-26 20:05:46 +00:00
6bfb730eba
Use ubmemalloc() to get mapped uba memory.
...
Only copy mbufs if there are more than two in a mbuf chain (on transmit).
This squeezed another 5% out of the DEUNA. (now closing up to 100 K/s :-)
2001-04-26 19:36:07 +00:00
014984b747
Add functions to allocate mapped-in qbus memory.
2001-04-26 19:16:07 +00:00
376be9fdf3
splimp -> spluba.
2001-04-12 20:08:09 +00:00
63edf2e11d
Protect the call to uba_done() with spluba().
2001-04-12 20:07:40 +00:00
ae66f2ea53
splimp -> splbio.
2001-04-12 20:05:12 +00:00
3d6b1bec1e
splimp -> splnet
2001-04-12 20:04:24 +00:00
2ceebb6c0e
Remove unnecessary test of tp->t_linesw against NULL; they are results
...
of confusion while correcting compilation error after t_line is
replaced with t_linesw.
2001-03-31 00:35:21 +00:00
511a94bf6e
Do not send looped-back setup packets into the IP stack.
...
Handle xmit interrupts due to invalid transmit list (``cannot happen'')
Shoot the one that wrote the software for those cards.
2001-02-25 13:51:11 +00:00
d040bd5908
Return error in the case of using ODIOCGDINFO or ODIOCGDEFLABEL when
...
the number of partitions is > OLDMAXPARTITIONS. This is better
than silently truncating the label (don't want to silently throw
away partitions when using an old disklabel binary on a label with
> 8 partitions). From Enami Tsugutomo.
2001-01-08 02:03:45 +00:00
e2d1c1f926
Adapt all disk devices in MI directories to handle ODIOC* calls
...
for ports that have bumped MAXPARTITIONS (and thus define
__HAVE_OLD_DISKLABEL).
2001-01-07 18:09:01 +00:00
9bbf84e4ca
Changes for dzkbd/dzms. This is not yet finished, but at least the
...
kernel is useable.
2000-12-30 22:11:46 +00:00
a64a0f8137
ALTQ'ify.
2000-12-14 07:15:45 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
507aaec04c
Adapt to the new line discipline scheme.
2000-11-02 00:01:44 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
b5e0d5686e
remove include of <vm/vm.h>
2000-06-28 17:09:41 +00:00
2f159a1bac
remove/move more mach vm header files:
...
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
2000-06-26 14:20:25 +00:00
cc483219bc
Must be able to compile without "mtc".
2000-06-10 19:44:55 +00:00
944b6966e9
Fix a transmit bug and get a little more out from the receive logic.
2000-06-08 19:58:49 +00:00
2f85fe7adb
Adjust to new evcnt stuff.
2000-06-05 00:09:17 +00:00
0bd304e528
More event counter stuff. Plus a little cruft cleanup while doing it.
2000-06-04 06:16:53 +00:00
576faa0c31
Start couting interrupts.
2000-06-04 02:14:12 +00:00
16f02724d6
Some updates to the DEUNA driver:
...
- Change the transmit logic to send from a pre-allocated buffer instead
of doing DMA out of the mbufs directly. Timing shows that it takes
4 times longer to map in the mbufs via the sgmap routines instead of
just copying the data! This must be fixed sometine in the future.
- A bunch of other minor fixes.
2000-05-28 17:23:44 +00:00
21fc65e1a8
sleep() -> tsleep()
2000-05-27 04:52:27 +00:00
wiz