607b14bf7b
Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham.
2001-05-22 16:58:23 +00:00
a888f6ef73
If the cache line size in the BHLC register is not configured,
...
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
2001-05-22 16:10:44 +00:00
79859fb138
Regen.
2001-05-22 16:07:56 +00:00
6e2bc5b352
Enable the PCI MWI command for memory writes on the i82558 and
...
higher.
2001-05-22 16:05:01 +00:00
b16ba1d8cd
Add i82562ET id.
2001-05-22 16:04:27 +00:00
3eced62df6
bring in fixes from beta12:
...
- better error checking for read/write failures
- new install/configure/Makefile and support scripts (we don't use)
- don't allow 0 delay for non-root accounts
XXX: Someone needs to coordinate to feed back our prototype fixes to Jeff!
2001-05-22 15:38:22 +00:00
188e0d6625
Some changes from the new FreeBSD `fxp' driver:
...
- Add some additional config block bits for the i82558/i82559.
- Change the config block template to only fill in the must-be-one
reserved bits, leave fxp_init() to fill in all the important things.
- On the i82558/i82559, we can use "Receive Long Frames" rather than
"Save Bad Frames" to support the VLAN MTU.
- Use 802.3x flow control on the i82558/i82559. This is all handled
transparently by the hardware. When in promiscuous mode, allow
wire-watchers to see the flow control frames.
- Use the Extended TxCB format on the i82558/i82559. This places two
Transmit Buffer Descriptors directly in the TxCB, which should cover
the vast majority of packets transmitted. This saves PCI transactions
that would otherwise be required to fetch the TBD list.
With the tansmit queue length changes from yesterday, this gets us up to
11.5MB/s TCP transmit speed, out of an absolute maximum of 12MB/s possible
on a 100Mb/s link.
2001-05-22 15:29:30 +00:00
2a604875d6
Remove one extra byte from scsipi_mode_select; pointed out by Juergen
...
Hannken-Illjes.
2001-05-22 15:14:24 +00:00
f2f22b5de0
sunndd has been renamed ndbootd.
2001-05-22 14:52:24 +00:00
b934309492
sunndd has been renamed to ndbootd.
2001-05-22 14:51:37 +00:00
ee3099f75d
Note that sunndd has been renamed ndbootd.
2001-05-22 14:50:31 +00:00
ab467667c7
Finished the 3rdparty import procedure for the ndbootd
...
package: Added RCS IDs, a Makefile, added to 3RDPARTY.
Also removed sunndd from 3RDPARTY.
2001-05-22 14:41:59 +00:00
9a53d8f0aa
Add the D-Link DGE-500T to the list of cards that use the gsip driver.
2001-05-22 14:39:02 +00:00
2d0f1618a6
Import of Matt Fredette's ndbootd boot program for Sun2 machines.
2001-05-22 14:20:49 +00:00
e25bf167a1
Regen.
2001-05-22 10:43:15 +00:00
f43e2c6ba1
Add Scanjet 4300.
2001-05-22 10:38:56 +00:00
4d029c3f35
Make this compile when _USE_WRITE is defined
2001-05-22 08:31:27 +00:00
e75dca2946
s/First appeared in 1.5/First appeared in 1.6/
2001-05-22 04:27:38 +00:00
390cedba3c
added "" around various tags (.Em, .Sq, .Li) that were missing.
...
this cleans up the HTML version a lot.
macppc/hardware
doubled required RAM -- bootloader needs 16 MB to be present
reworded video section -- 9500 shipped with PCI card, not on-board video
2001-05-22 04:09:41 +00:00
94bba09883
bus_space'fied fd driver by TSUTSUI Izumi,
...
works with PICA-61 and Microsoft-Jazz,
but still doesn't work with his NEC-JC94 (NEC Express 5800/230)
due to data overrun.
2001-05-22 03:22:49 +00:00
a5a03e13dd
Report 82558, 82559, etc. based on chip revision. Also, remember which
...
revsion we have for feature enables later.
2001-05-22 01:23:25 +00:00
892627dd05
Merge the swap-backed and object-backed inactive lists.
2001-05-22 00:44:44 +00:00
4af61a686a
oops. Make it compile.
2001-05-22 00:43:12 +00:00
b5805fa0c8
Sigh. Regen correctly.
2001-05-22 00:41:52 +00:00
611e112566
A little slight cleanup.
2001-05-22 00:27:01 +00:00
6a9d72f10a
List the IOGEAR UC-232A (aka G-UC232A) USB/Serial adapter.
2001-05-22 00:21:25 +00:00
7a31dfa328
Supoprt the IOGEAR/ATEN UC-232A, which uses the Prolific 2303.
...
Make this the "PRODUCT_PL2303" because it's actually id 0x2303
and change the old PRODUCT_PL2303 to PRODUCT_RSAQ.
2001-05-22 00:18:03 +00:00
d5d0b41422
Reset the status register after abort.
2001-05-22 00:16:49 +00:00
8809460317
Correct ring buffer handling in recording. From Isaki-san.
2001-05-22 00:15:54 +00:00
fb4607ec45
Add some additional register definitions, from FreeBSD.
2001-05-22 00:07:32 +00:00
0064d69faf
Re-arrange the transmit control data somewhat so that we can
...
use the extended TxCB format (that change will happen later).
2001-05-21 23:58:44 +00:00
92d92b1cb2
Correct an easy mistake in initializing gain registers.
...
This will fix the L-R imbalance.
Suggested by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
2001-05-21 23:55:04 +00:00
65ac078927
Sigh, typo in last.
2001-05-21 23:21:27 +00:00
b3421335d9
There is no iommu prom node on JavaStation 1 and sbus node is directly
...
under root. If /sbus is encountered on sun4m - attach implied iommu
first and attach /sbus under it. Adjust bootpath accordingly to match
the attachment.
2001-05-21 22:44:07 +00:00
00f922fa70
Change NTXSEGS from 16 to 8, and the TXQUEUE len from 128 to 256. Also
...
increase the number of Rx buffers from 64 to 128.
These mirror some performance tweaks made to the sip(4) driver.
2001-05-21 22:20:31 +00:00
afdab0cab8
The ICH3 also has the Resume Bug.
2001-05-21 22:12:08 +00:00
a0f9e3c6fb
Regen; add ICH3 network controller IDs.
2001-05-21 22:11:31 +00:00
6b51adfbff
Add ICH3 network controller IDs.
2001-05-21 22:11:06 +00:00
d84e2452ea
Fix non-fatal typo -- CB_NOP -> CU_NOP in the ICH work-around (they
...
have the same value).
2001-05-21 21:49:51 +00:00
b4538a0165
The 82801BA built-in Ethernet has a bug which requires us to
...
issue a NOP before a CU_RESUME when in 10baseT mode. Handle
this.
2001-05-21 21:47:52 +00:00
cb5a9dc5a5
Added myself to the developer list
2001-05-21 21:39:51 +00:00
2867b0b94c
PR#12885, added PROM name translations for fas, from John Heasley <heas@shrubbery.net>
2001-05-21 21:25:28 +00:00
e7a0ef6145
ANSI'ify.
2001-05-21 20:59:38 +00:00
ecb3a30463
add $NetBSD$
2001-05-21 20:47:13 +00:00
7fd9577e9e
fix WSDISPLAYIO_PUTCMAP bug.
2001-05-21 18:37:30 +00:00
655a3a0437
check BOOTSTRAP_ELF (from Katsuomi Hamajima)
2001-05-21 18:26:48 +00:00
97fac3124c
s/shl/shlunx/
2001-05-21 18:21:37 +00:00
128d6fc64b
Check RBB and REB bits in the console getc function and go to DDB
...
when a break signal is detected.
2001-05-21 16:50:35 +00:00
c8589412aa
recompile.
2001-05-21 16:02:02 +00:00
5618978d88
don't install SH4 binary.
2001-05-21 15:57:02 +00:00
thorpej