wiz
0a600be867
receive, not recieve
2001-06-12 15:17:10 +00:00
simonb
e5bd00e48d
For ports that wire up pciide in compatibility mode, have
...
them define __HAVE_PCIIDE_MACHDEP_COMPAT_INTR_ESTABLISH
in pci_machdep.h and pciide_map_compat_intr() only calls
pciide_machdep_compat_intr_establish() if that preprocessor
define exists.
Ports that don't need to do this no longer need to supply a
dummy function.
2001-06-08 04:48:54 +00:00
tsutsui
ad811093a3
Add iha at pci .
2001-06-03 13:46:57 +00:00
tsutsui
c9d2bd8419
Sort some entries.
2001-06-03 13:21:28 +00:00
chs
821ec03ed9
replace vm_map{,_entry}_t with struct vm_map{,_entry} *.
2001-06-02 18:09:08 +00:00
soda
f57a0847d2
fix off by one error. extra one page is needed for the case where
...
buffer is not page aligned (e.g. raw i/o case).
2001-05-31 20:56:29 +00:00
mrg
67afbd6270
use _KERNEL_OPT
2001-05-30 11:57:16 +00:00
chs
e44e9dec8a
replace vm_page_t with struct vm_page *.
2001-05-26 21:27:02 +00:00
tsutsui
2a70c2afdd
Fix pte_size values changed by my misunderstanding in the previous.
2001-05-25 23:57:06 +00:00
soda
94bba09883
bus_space'fied fd driver by TSUTSUI Izumi,
...
works with PICA-61 and Microsoft-Jazz,
but still doesn't work with his NEC-JC94 (NEC Express 5800/230)
due to data overrun.
2001-05-22 03:22:49 +00:00
soda
510d65b241
sync with GENERIC: enable SOFTDEP, add vlan, etc.
2001-05-21 03:37:30 +00:00
soda
17dad5433e
abstract "${OBJCOPY} --output-target=ecoff-littlemips"
2001-05-21 03:34:48 +00:00
tsutsui
b9528c4bd8
Call doshutdownhooks() in cpu_reboot().
...
It was not called when I committed the osiop, and I didn't notice
osiop caused problem when I fixed cpu_reboot()...
2001-05-17 14:53:54 +00:00
tsutsui
8f3dc26a16
Don't forget to set dma_count register in picaDmaStart().
...
XXX fd still does not work. (no longer hangs, but causes data_overrun)
2001-05-15 14:29:17 +00:00
tsutsui
9247a0bbcc
- Declare pccnattach() in <machine/pccons.h>
...
- Make cpu_reboot() reset machines properly without pccons
2001-05-11 21:15:11 +00:00
tsutsui
67b73792f6
Clean up redundant declarations.
2001-05-11 16:36:42 +00:00
tsutsui
73c5107dc5
Tidy up some debug messages.
2001-05-09 16:44:44 +00:00
scw
2963ff5c58
Add l_poll' to
struct linesw' and provide an xxxpoll() entry point
...
in each tty driver to indirect through it.
This allows tty line-disciplines to handle poll(2) system calls.
2001-05-02 10:32:08 +00:00
tsutsui
cdd9dc4e09
Add MD attachments for the Symbios/NCR 53c710 SCSI controller,
...
found on the NEC Express5800/230A.
2001-04-30 04:52:53 +00:00
thorpej
4717bdf66e
Remove some redundant definitions (they're already in <mips/pmap.h>).
2001-04-25 17:54:07 +00:00
bouyer
937a7a3ed9
Pull up the thorpej_scsipi branch to main branch.
...
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 17:53:04 +00:00
thorpej
e553a6caf0
Do the first allocsys() pass (the pass that computes sizes) before
...
calling pmap_bootstrap(); pmap_bootstrap() needs some of the size
information computed by allocsys().
2001-04-24 15:41:38 +00:00
thorpej
1c3a62e066
Sprinkle pmap_update() calls after calls to:
...
- pmap_enter()
- pmap_remove()
- pmap_protect()
- pmap_kenter_pa()
- pmap_kremove()
as described in pmap(9).
These calls are relatively conservative. It may be possible to
optimize these a little more.
2001-04-24 04:30:50 +00:00
thorpej
079c2e0ac9
Call pmap_bootstrap() before calling uvm_pageboot_alloc(), so that
...
the kernel virtual address space bounds will be set up.
2001-04-23 23:50:22 +00:00
thorpej
5871b80f00
Use uvm_pageboot_alloc() for early memory allocation, rather than
...
calling pmap_steal_memory() directly. On these platforms, since
uvm_pageboot_alloc() is a wrapper around pmap_steal_memory(), there
is no functional change. This is merely for API consistency.
2001-04-22 18:21:48 +00:00
kleink
f06533a1ee
Add definitions of C99 integer format conversion macros.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 17:13:04 +00:00
kleink
739cb75837
Add definitions of C99 specified-width integer type limits.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-15 15:29:02 +00:00
kleink
cdcf9f46c5
Add definitions of C99 integer constant macros.
...
Tidy Makefiles up a little.
2001-04-14 22:46:19 +00:00
kleink
a7c20e5788
Add definitions of C99 integer constant macros.
2001-04-14 22:38:33 +00:00
kleink
7affdab52e
Add definitions of C99 minimum-width and greatest-width integer types.
...
XXX Fastest minimum-width integer types haven't been decided upon yet.
2001-04-14 12:19:49 +00:00
thorpej
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
thorpej
316dcc474b
splvec.splimp -> splvec.splvm
2001-04-12 19:21:20 +00:00
tsutsui
7cd0069dfc
Make this compile without com.
2001-03-30 16:32:02 +00:00
ur
5ba1d71d33
Don't reference nonexistent register on R96. (and maybe R94 too)
2001-03-30 09:10:48 +00:00
tsutsui
fdce371144
objcopy -> ${OBJCOPY}
2001-03-28 17:04:44 +00:00
lukem
723cd818d8
move duplicate definitions for:
...
pc, lpt, joy, ocis, apm, satlink, i4bctl, i4brbch, i4btel, i4btrc, i4b
from the port-specific arch/*/*/conf.c files into sys/conf.h
2001-03-21 22:25:52 +00:00
chs
ac3bc537bd
eliminate the KERN_* error codes in favor of the traditional E* codes.
...
the mapping is:
KERN_SUCCESS 0
KERN_INVALID_ADDRESS EFAULT
KERN_PROTECTION_FAILURE EACCES
KERN_NO_SPACE ENOMEM
KERN_INVALID_ARGUMENT EINVAL
KERN_FAILURE various, mostly turn into KASSERTs
KERN_RESOURCE_SHORTAGE ENOMEM
KERN_NOT_RECEIVER <unused>
KERN_NO_ACCESS <unused>
KERN_PAGES_LOCKED <unused>
2001-03-15 06:10:32 +00:00
thorpej
2c4c690f14
Add the BUS_DMA_STREAMING flag.
2001-03-07 22:42:16 +00:00
tsutsui
a411302ed3
Include files.usb
2001-02-17 04:32:59 +00:00
tsutsui
f47d2bae91
Fix include path.
...
(mips/include/mips_opcode.h -> mips/mips_opcode.h)
2001-02-17 04:31:25 +00:00
tsutsui
750774cded
Add new arctype for NEC Express5800/230A.
...
XXX: we should have "sysconf" structures like pmax.
2001-02-17 04:27:53 +00:00
tsutsui
99adff7a25
Remove db_machine_init(), which was removed from mips/db_interface.c.
2001-02-05 13:34:42 +00:00
tv
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
fvdl
c7f1462f3e
Add machdep file for procfs. Currently only used for linux-style
...
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.
2001-01-17 00:07:18 +00:00
thorpej
d74e432ed3
Make softclock a generic soft interrupt of the API is available,
...
adding the requisite void * argument to softclock().
2001-01-15 20:19:50 +00:00
martin
a261276f16
The i4b raw b-channel devices actually do have an ioctl routine,
...
so better add this to the cdevsw entry.
Noted by Bruno Achauer.
2001-01-14 11:17:28 +00:00
thorpej
d85a75f583
Make sure everybody has an splvm() and equate it with splimp() (splimp()
...
is the historical name for this interrupt level, and the historical name
is going to go away in the near future).
2001-01-14 02:00:37 +00:00
ur
7701dc57be
Adapt to pci_intr_map change.
2001-01-13 10:46:18 +00:00
martin
f53c899649
Add isdn devices to all archs that seem to support at least one of the
...
necessary busses. Sync comments with reality for archs that already had
the devices.
2001-01-08 21:46:33 +00:00
ur
63f060c06a
Use MI md_root.c
2000-12-24 09:35:28 +00:00