locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.
an SR value or an IPL_* constant).
- Take advange of the smaller ipl_cookie_t to shrink kmutex_t from
16 bytes to 8 bytes by overlapping storage where possible.
- Implement a RAS-based _lock_cas() for mc68010 systems (Sun2). See
sun68k/sun68k/isr.c.
Tested on various m68k platforms, but NOT Sun2. In any case, at least
Sun2 compiles now.
to avoid exporting unnecessary files to userland.
Should fix build.sh failure, which was pointed out by isaki@.
XXX: which userland program would require contents of <machine/intr.h>?
int _bus_dmatag_subregion(bus_dma_tag_t tag,
bus_addr_t min_addr,
bus_addr_t max_addr,
bus_dma_tag_t *newtag,
int flags)
void _bus_dmatag_destroy(bus_dma_tag_t tag)
that allow a (normally broken/limited) device to restrict the bus address
range it can talk to. this is used by bce(4) to limit DMA addresses to
1GB range, the maximum the chip can address.
all this is from Yorick Hardy <yhardy@uj.ac.za> with input from several
people on tech-kern.
XXX: bus_dma(9) needs an update still.
by Slava Semushin <slava.semushin@gmail.com>.
To verify that no nasty side effects of duplicate includes (or their
removal) have an effect here, I've compiled an i386/ALL kernel with
and without the patch, and the only difference in the resulting .o
files was in shifted line numbers in some assert() calls.
The comparison of the .o files was based on the output of "objdump -D".
Thanks to martin@ for the input on testing.
- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.
version.
Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().
dumpdev. this occurs when we try to set the dumpdev to a device
with no driver loaded. this fixes PR#34872.
in sys_swapctl, if bdevsw_lookup() fails, set dumpdev = NODEV
before calling cpu_dumpconf(). (this also fixes PR#34872.)
XXX: cpu_dumpconf() should probably be changed to take a dumpdev
XXX: and return an error in such cases, but that is a much more
XXX: intrusive change.
XXX2: this is only run-tested on sparc64 and compile tested on a
XXX2: couple of platforms.
of available test candidates. It uses the previously unused (as far as I
can tell) Timer D, in freerunning mode. It only uses a 1/200 prescaler
(20KHz), as anything faster would roll over too fast for the system timer.
(Gotta love 8-bit resolution timers!) Approved for untested commit by core@.
msaitoh