"struct cpu_cpuid_family", so that we can have a cpu_setup function per
known cpu type. For now use it only for cyrix 6x86 to enable suspend-on-halt
and implement cyrix's workaround to the "coma bug".
We play mono samples on all 4 channels.
However, we get the volume settings for mono samples as a symmetic two-channel
setting... the other two channels used to stay at max volume...
I believe that something else is wrong here, but dont want to change MI
code (which in turn influences a couple of MD driver) thus late in the release
cycle.
memory-mapped device access (manifested by an apparent wedging of the
PCI bus):
- If cpu_class == CPUCLASS_486, disable memory-mapped PCI device access,
leaving only i/o-mapped access enabled.
- Provide a patchable kernel variable (i486_pci_mem_enabled) and a kernel
option (I486_PCI_MEM_ENABLED) to re-enable it.
during auto-configuration (`cold'), raise interrupt level to splhigh
and return, instead of reporting a stray interrupt.
2. In cpu_switch(), start running a newly selected proces at splclock()
instead of the saved IPL, allowing high-priority interrupts in
ctx_alloc() which can take many cycles to install a new context
(especially on the two-level sun4c MMU).
deal with cheap CD-ROMs and other devices that do not appear to have
any way to enable parity generation. In the future, it might be nice
to have this configurable on a per-device basis with back-to-back
parity errors automatically disabling parity for the device. That
would require some MI changes.
* Handle unaligned and odd-length transfers.
This could probably be handled better in the future.
if the break instruction is still there. This works around a problem with
the software single step in DDB not recognizing the temporary breakpoint
set to emulate the single step.
Fix cursor sprite for X11 startup/exit:
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
* add cursor on/off functions.
* Default cursor state is off (for framebuffer console).
* Turn off cursor in each driver's xxxCursorInit() entrypoint.
* Turn on cursor at the end of each driver's xxxLoadCursor() entrypoint.
works with X11R5 servers shipped with NetBSD 1.3.
tech-kern. Reported by Sean Davidson to cause erroneous doubling of
keyboard input on a 5000/50 under load.
Increasing the DELAY() from 2 to 30 doesn't help. Remove it for the
1.3 release. May cause problems with low-speed serial input, but
console keyboards work properly.
* Call gdt_init() earlier on.
* Don't bother to check for TSS and LDT descriptors in verr_gdt().
* Nuke the sti special case for trace and breakpoint traps.
* Move some variable declarations into more appropriate locations.
- use board address space > 4 MB, instead of iszthreepa(), to detect Z3-mode
boards. We dont want the bus, but want the address configuration.
- s/CV64CONSOLE/CV3DCONSOLE/
- s/cv3d_zorroIII == 1/cv3d_zorroIII/ and s/cv3d_zorroIII != 1/!cv3d_zorroIII/
* Add code to query CDs for size, from MI scsi cd.c. Use it on CDs.
* Set C partition size for CDs. 4.4bsd/pmax code only set `a' partition
size and required users to mount `a' partition, breking raw-device
access like "disklabel rz?".
* Avoid possible divide-by-zero call to howmany() from rzstart(),
on removable media that aren't ready at device-open time.
Verified to work on rrz42.
until a proper fix is available:
Perpetuate the 4.4bsd design even further. Change keyboard-driver
open routines to check for an active raster console. If active, set the
keyboard struct tty's t_winsize from the rcons t_winsize on first open.
See pr 4438 for remaining problems and discussion of a complete fix.
* add includes for sys/dev/scsipi headers.
* cut-and-paste mode_sense and disk-geometry sense code from sd.c,
with name changes sd -> rz.
* Write `rz_command()' to send SCSI sense commands based on
existing rz size-sensing code.
* get geometry info with page 4 and page 5 mode sense.
* use resulting geom info for default label, fake label, and when
using ultrix labels. (ultrix labels have no geometry info).
Fixes incrrect-label bugs with using sysinst to install onto
Ultrix-labelled disks.
to remove. The address of the pointer rather than the address of what
is pointed to was use to track the previous handler resulting in problems
when releasing a chained irq. (from John Ballance)
Added check for zero terminator after removing spaces in
get_bootconf_option(). This fixes a problem of matching NULL terminators
if there are trailing spaces in the boot args.
configured into the kernel, or when the platform is not supported.
Use the defopt'ed options, rather than NDEC_... and remove the needs-flag
hack that's existed for a while.
but is a marked improvement. This takes advantage of a pseudo-DMA hardware
hack of Apple's that exposes a 16-bit register that the Apple-designed
memory controller acts like a DMA controller and handshakes into or out
of the FIFO. Wierd.
Unfortunately, there does not seem to be a good way to determine what
variety of comm-slot card is present in a machine. There is still an
interrupt issue preventing these cards from working--hopefully that will
be ironed out shortly.
normal rei course. If the handler returns non-zero, just rte.
This should allow better MACE response-time and still keep serial
interrupt overhead to a minimum on older, slower machines.
- fix _C_LABEL so that it actually works.
- make __RENAME use _C_LABEL.
- fix __RENAME so that it expects an unquoted argument.
- fix __indr_reference and __warn_references so that they
supply their own final semicolon.
- define __warn_references to nothing if not GNU C (required
by the way it's used).
The __warn_references semicolon change has to be made
so that __warn_references can be defined into nothing.
(A ; all by itself isn't a great idea.) The __indr_reference
change was made for consistency.
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.
touched any user-space address recently. This is efficient
for things that stay in the kernel for a while, waking up
to handle some I/O then going back to sleep (i.e. nfsd).
If and when such a process returns to user-mode, it will
fault and be given a real context at that time.
This also makes context switch faster, because all we need
to do there for the MMU is slam the context register.
--entries / remove kernel entry from locore / reorganize vector entry
--code. Enables access to stack frames transitively w.r.t. palcode
--vectors, e.g. upward traceback works, inverting (possibly several)
--kernel vectors. Until now, all trackbacks ended at the first-reached
--instance of trap(), which was totally useless as there is no mystery
--to trap->panic->cpu_reboot
destination register bit pattern with 1.0), which automatically provides
corner case handling.
Missing ftwotox emulation originally reported by Norman Mackenzie in PR 4237,
but he proposed a different implementation.
- Map in all physical memory first in system space. This reduces
pmap_copy_page() and pmap_zero_page to 3 resp. 2 instructions.
- Have fized position user page tables. Makes the pv_table smaller
and all reverse references faster (and simpler).
- Remove the wiring code. Nobody doesn't even know what a DR32 is anymore.
- Simulate page reference bit by setting page invalid, as suggested by
Rich Draves in a paper for 1991 Mach Usenix Symposium.
This reduced the time spent in the pmap module to between 70-75% of
the previous; and made process startup _much_ faster.
- Map in all physical memory first in system space. This reduces
pmap_copy_page() and pmap_zero_page to 3 resp. 2 instructions.
- Have fized position user page tables. Makes the pv_table smaller
and all reverse references faster (and simpler).
- Remove the wiring code. Nobody doesn't even know what a DR32 is anymore.
- Simulate page reference bit by setting page invalid, as suggested by
Rich Draves in a paper for 1991 Mach Usenix Symposium.
This reduced the time spent in the pmap module to between 70-75% of
the previous; and made process startup _much_ faster.
- Map in all physical memory first in system space. This reduces
pmap_copy_page() and pmap_zero_page to 3 resp. 2 instructions.
- Have fized position user page tables. Makes the pv_table smaller
and all reverse references faster (and simpler).
- Remove the wiring code. Nobody doesn't even know what a DR32 is anymore.
- Simulate page reference bit by setting page invalid, as suggested by
Rich Draves in a paper for 1991 Mach Usenix Symposium.
This reduced the time spent in the pmap module to between 70-75% of
the previous; and made process startup _much_ faster.
kleink