811e1e2e60
Fix a typo: it's ENVSYS_FPERCENT not ENVSYS_FPERCENTAGE.
...
Bump date.
2007-07-16 17:37:10 +00:00
e39a74728c
Add 29160 to list of supported devices. List it as ASC-29160 instead
...
of AHA- because that's what the packaging says (apparently short for
"Adaptec SCSI Card 29160", also on the packaging). Tested on
netbsd-4/i386.
Like pavel's, mine also works at Ultra160:
ahc2 at pci1 dev 5 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc2: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
st0 at scsibus1 target 5 lun 0: <CERTANCE, ULTRIUM 2, 1914> tape removable
st0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers
Bump date.
2007-07-16 14:06:07 +00:00
680eacb522
Fix Fn abuse. New sentence, new line. End sentence with dot.
2007-07-15 21:33:12 +00:00
c01b8826d1
Fix Fn abuses. Sort SEE ALSO. End sentences with dots.
...
Use .Nm more.
2007-07-15 21:31:15 +00:00
32986e5aa1
No ending dot in Nd.
2007-07-15 21:19:26 +00:00
082ee1f077
forgot to add dec-mcs entry to mapper.dir
2007-07-15 14:44:37 +00:00
33793b3134
add CP922 support to iconv.
2007-07-15 14:41:18 +00:00
77e1eaa78e
setrunqueue is no more
2007-07-15 02:57:23 +00:00
82d31a4a20
Remove obsolete SCHED_LOCK(9), which is gone.
...
ok by <ad>
2007-07-14 22:09:57 +00:00
eeeb9eddd5
Add references to sched_4bsd(9).
2007-07-14 22:02:33 +00:00
5c52ed78e9
Move scheduler(9) to sched_4bsd(9) and sync its contents with reality. Also
...
add a reference to McKusick et. al., which still contains the best in-depth
description of the 4.4BSD scheduler.
2007-07-14 21:54:30 +00:00
10dc2af304
Remove obsolete setrunqueue(9) manpage.
...
ok by <ad>.
2007-07-14 20:39:33 +00:00
4f02ad43b0
Add initial manpage for the "new" scheduler API.
...
Note: More content will follow, to this manpage as well as the NetBSD
Internals book.
Ok by <ad>
2007-07-14 20:23:12 +00:00
8f6e6386cb
Bump date.
2007-07-14 11:47:15 +00:00
8751253925
Update mlinks for callout/kthread changes.
2007-07-14 11:39:01 +00:00
8a398d3980
Sync with reality.
2007-07-14 11:34:54 +00:00
58af9c20d0
Sync with reality.
2007-07-14 11:22:33 +00:00
53d643b5f7
- kcont was removed.
...
- Replace some references to tsleep.
2007-07-14 10:52:47 +00:00
fb3a719044
New udav(4) device, from Julian Suschlik via current-users@.
2007-07-12 21:26:03 +00:00
ffa428bf85
Document the 'flags' parameter to kauth_cred_set/getgroups.
...
Fix some obvious typos in the return types and return values of these
functions.
2007-07-11 19:12:09 +00:00
1f48268a37
Add support for NVIDIA nForce 2/3/4 SMBus controller and SMBus driver.
2007-07-11 07:53:29 +00:00
7440188711
Update the man page to reference the use of a new firmware for wpi.
2007-07-09 19:59:40 +00:00
1f7faf40a2
Change the entry for ptmx to use the netbsd ptm driver.
...
Delete the entries for pts/nnn and add a note at the tope (next to the
ptmx info) about using ptyfs for the pts devices.
2007-07-05 19:34:36 +00:00
8a70d87249
Sync with reality.
2007-07-05 16:00:39 +00:00
c51a1c15bf
Add the CODE REFERENCES section.
2007-07-04 17:35:20 +00:00
e719333534
Document the sysctl node to change the refresh value of the callout
...
function that monitors the sensors.
2007-07-03 22:47:20 +00:00
dbfc63fcce
Rename nbinstall to ${MACHINE_GNU_PLATFORM}-install as it calls the
...
target strip. Don't pass down strip as it is not needed any longer.
2007-07-03 16:29:24 +00:00
2025659d20
update and document yield().
2007-07-03 12:14:24 +00:00
86e49bbf53
remove the BUGS entry about >1GB ram being a problem, as it's been fixed
...
since early this year.
2007-07-02 20:49:48 +00:00
f924a08281
Forgot to update another part.
2007-07-02 20:46:55 +00:00
a485348536
Improve description.
2007-07-02 20:43:47 +00:00
ce7d148c9a
Add missing comma.
2007-07-02 20:07:23 +00:00
bc794f88ae
Explain the event that mfi(4) will send to powerd(8) when a drive
...
is not online.
2007-07-02 16:23:58 +00:00
97ca291124
Add another section explaining the events that acpitz(4) will send
...
to powerd(8) when a Thermal Zone is critical or hot.
2007-07-02 16:05:08 +00:00
2aaf4fe072
Add another section explaining the events that acpibat(4) will send
...
to powerd(8) when battery capacity is critical or lower < warncap/lowcap.
2007-07-02 15:59:32 +00:00
8454ce25b1
Xref powerd(8).
2007-07-02 15:49:50 +00:00
49830c79f0
Add another section explaining the events that ipmi(4) will send
...
to powerd(8) when state in a sensor has changed.
2007-07-02 15:48:33 +00:00
bdb4152ea8
Fix typo and bump date.
2007-07-02 08:44:18 +00:00
3c01554a05
dtfs -f for PUFFS_KFLAG_LOOKUP_FULLPNBUF
2007-07-01 22:59:09 +00:00
6596e0c995
adapt: **newnode etc. pointers -> struct puffs_newinfo
2007-07-01 18:40:15 +00:00
fe7bbdec69
adapt: pid -> const struct puffs_cid *
2007-07-01 17:23:44 +00:00
1776bc7796
adapt: pcn->pcn_cred is now a pointer
2007-07-01 15:32:02 +00:00
08d5afa292
Imported envsys 2, a brief description of the new features:
...
(Part 4: documentation and configuration files)
* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.
Tested by:
blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).
2007-07-01 07:55:51 +00:00
b013a2d4f9
Include struct componentname declaration in struct namei - it's
...
usually the more interesting of the two anyway.
2007-06-30 18:55:19 +00:00
21a7d11f2b
Fix description on what is returned locked and when.
...
noticed by Rumble
2007-06-28 08:02:41 +00:00
d831b3217f
Fix typo.
2007-06-28 02:54:23 +00:00
a5ac7ff5aa
Import i386/gcscide(4). A driver for the IDE Controller of the
...
AMD CS5535 Companion device found in the decTOP.
gcscide0 at pci0 dev 15 function 2
gcscide0: National Semiconductor/AMD CS5535 IDE Controller (rev. 0x00)
Supports Ultra DMA mode 4, Pio Mode 4 and MDMA mode 2.
"Go for it" jmcneill@.
2007-06-27 23:02:52 +00:00
dbbafa7889
Note that fast_ipsec(4) now supports IPSEC_NAT_T option
2007-06-27 21:27:35 +00:00
5c67bb8390
man bits from anon ymous
2007-06-25 23:36:18 +00:00
129a9f6a6e
add FTHOI (for the {heck,hell} of it)
2007-06-25 17:25:17 +00:00
4f748f12bb
Note that if vp is NULL in cache_enter, a negative entry is created.
2007-06-25 16:33:50 +00:00
436b31f333
Add va_birthtime.
2007-06-24 22:49:44 +00:00
53a4105885
Actually, keep PUFFS_KFLAG_NOCACHE and -o cache around as shorthand
...
to neither page- nor namecache.
2007-06-24 22:25:49 +00:00
5662e7f720
PUFFS_KFLAG_NOCACHE became two, so introduce the command line options
...
-o nonamecache and -o nopagecache and adapt file systems where necessary.
2007-06-24 22:18:38 +00:00
b9ff3c810f
TRUE -> true, FALSE -> false.
2007-06-24 19:26:58 +00:00
3aa77bc919
Just to demonstrate namemod a bit further, make this flip the case
...
of filenames / contents instead of rot13 if -f is given.
2007-06-24 18:59:27 +00:00
39542808a8
cast tolower() arg to unsigned char
2007-06-24 18:57:26 +00:00
0d05db1c32
use puffs_null_setops()
2007-06-24 18:43:30 +00:00
a2b6c72725
fix this also, had a similar rototill-typo as rot13fs
2007-06-24 18:37:40 +00:00
eb83bd6c94
I wasn't going to add any more silly examples, but I'll bite for
...
this one, since it's a good exercise ..
Add icfs, which does the same thing as the refuse-based icfs agc
added earlier this week, i.e. null-mounts & converts the entire
namespace to lowercase. However, it's a fun comparison, since this
is implemented in a completely different fashion from the refuse
version.
2007-06-24 18:32:00 +00:00
60f2903e7a
struct dirent is padded to an 8 byte boundary according to sys/dirent.h.
2007-06-22 15:03:40 +00:00
a08d769680
Initial import of icfs, a case-insensitive/retentive file system.
...
This file system is based on librefuse and puffs.
The icfs(8) utility can be used to mount an existing directory on a
new mount point. icfs makes use of the virtdir(3) virtual directory
routines. Underneath those virtual directories, the individual
directory entries will be displayed as an exact mirror of the original
directory, except that any capital letters in the original entry's
name will be substituted with an entry name consisting entirely of
lower-case letters.
This is an unusual example of a refuse-based file system which provides
lesser functionality than the file system it sits on.
2007-06-21 22:05:28 +00:00
5599c23a3d
Record the root directory at initialisation time.
...
Add a function to "normalise" a path to condense multiple repeated '/'
characters into one.
2007-06-21 21:59:32 +00:00
8d82f5f607
Add newgrp(1) cross-reference.
2007-06-21 15:12:59 +00:00
1c4b40e1bc
fix typo from previous rototill, makes this work again
2007-06-20 21:11:26 +00:00
5d2746d022
There is no p - it's the calling lwp these days.
2007-06-20 16:35:52 +00:00
eeff189533
- per socket keepalive settings
...
- settable connection establishment timeout
2007-06-20 15:29:17 +00:00
d562fea75e
sn(4) driver on mac68k has been switched to using MI SONIC driver,
...
so prepare MI sn(4) man page. Also improve some descriptions.
2007-06-20 13:31:54 +00:00
f666788961
mention services_mkdb; from Thilo Jeremias
2007-06-19 19:26:10 +00:00
d260ecaa44
add CP116[12](Thai ISO-8859-11 variant), CP1129,CP1163(Vietnamese).
2007-06-18 16:19:30 +00:00
0031e99f45
ident is now of type wchan_t
2007-06-17 18:50:07 +00:00
5ceea27797
Add man page for AMD Geode LX AES Security Block driver.
2007-06-15 23:04:20 +00:00
d1e849f0c3
vprint takes a const char *label
2007-06-15 11:42:11 +00:00
7b2f242c1b
+ I/O DATA USB-RSAQ3, I/O DATA USB-RSAQ5.
2007-06-14 14:46:09 +00:00
ede286013f
net.inet.tcp.newreno is no more.
2007-06-13 20:37:07 +00:00
b2d2e8fa61
Whitespace nits.
2007-06-13 00:00:23 +00:00
5ccf1c578a
Add a new ioctl AUDIO_GETBUFINFO. It works like AUDIO_GETINFO, but
...
doesn't obtain the ports, gain and balance related parameters.
Those generally require reading from the hardware and therefore are much
more expensive to obtain. Modify OSS emulation to use the new ioctl
where possible.
This reduces CPU usage of mplayer during mp3 playback with my Thinkpad
from 20% to < 1% and from 50% to 20% during Xvid playback.
Review and comments from jmcneill@
2007-06-11 13:05:46 +00:00
7bfb0e94c3
Add zyd(4).
2007-06-09 12:28:25 +00:00
bbec0bb7bf
Added OpenBSD's zyd(4) driver.
...
Supports ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network device.
2007-06-09 11:20:54 +00:00
14f772ea69
Don't use alloca(3) inside the X11 libraries if we compile with
...
stack protection. XFree86 can now be buildt fine with "USE_SSP=yes".
2007-06-07 11:49:17 +00:00
f1ed085bcf
Explained the word "new" in the first paragraph.
2007-06-06 06:18:39 +00:00
f8326bf98e
Move puffs to a two clause license where it already isn't so. And
...
as agc pointed out, even files with the third clause were already
effectively two clause because of a slight bug in the language...
2007-06-06 01:54:59 +00:00
ae34899ec3
make getopt() actually accept -t also
2007-06-05 12:20:35 +00:00
d7d886db87
Our VLAN implementation (as it correctly expected) is not allowed
...
to modify the whole VLAN tags, but it is permitted to change 12-bit
VLAN identificators only. Reflect this fact on the appropriate man
pages.
Antti Kantee and Mihai Chelaru from #netbsd-code were helpful in
better understanding of VLAN stuff. Thank you!
2007-06-05 11:15:15 +00:00
8d9552c610
PR/36436 - Joerg Niendorf -- missing "the"
2007-06-04 11:08:36 +00:00
00fa1e6950
Stack protector codegen bug on sh3 has been fixed, so drop sh3 from
...
the list of platforms where we disable ssp.
2007-06-03 21:07:33 +00:00
34dba262f3
Mention Enhanced Speedstep related options for amd64.
2007-06-03 19:35:26 +00:00
380cacfb28
we can now compile libc with _FORTIFY_SOURCE
2007-06-03 17:42:18 +00:00
05df4b4fef
add following encoding suuport of iconvdata:
...
CP1046(Arabic Extended)
CP1124(Cyrillic, Ukraine)
CP1125(PC, Cyrillic, Ukrainian)
2007-06-02 06:09:08 +00:00
7390dfc401
Add smsc.4 (hi, brett!)
2007-06-01 18:10:00 +00:00
5113d21113
Add man page for smsc device driver.
2007-06-01 14:12:45 +00:00
d3eeea012e
note new xirc manpage
2007-06-01 11:34:32 +00:00
a3c546562b
xi now attaches at xirc, not pcmcia
...
PR/36310 -- Joerg Niendorf
2007-06-01 11:24:22 +00:00
f463f993c1
Manual page for the driver for SigmaTels not-quite-UIRDA bridges.
2007-06-01 09:52:01 +00:00
dd01c9b84e
add "when" to the list in WTF/WTH
2007-05-31 20:03:59 +00:00
7fb92a5963
Updates for Switzerland and Liechtenstein.
2007-05-31 05:57:01 +00:00
7243a4e86c
Fix inverted comparison ${MACHINE_ARCH} != "hppa" when checking for
...
ssp. (hi^2 tls!)
2007-05-31 00:17:32 +00:00
c7bdc65e61
Use matching open and close parens.
...
Why make doesn't complain about $(foo} ?
2007-05-30 22:54:12 +00:00
14aa3a04d9
Fix typo, and eliminate mention of libssp since it's gone.
...
Move -D_FORTIFY_SOURCE to CPPFLAGS from COPTS.
2007-05-30 21:27:54 +00:00
dc99372be9
Match usage of FORTIFY_SOURCE on other platforms by not requiring special
...
include path: the normal header files now include the "SSP" ones (which one
should note are not really named right: SSP and FORTIFY_SOURCE are independent
features).
Disable USE_SSP on targets where the compiler doesn't support it at all
(mips, alpha) or it's known broken (sh3). But enable FORTIFY_SOURCE,
without SSP, on those platforms -- tested on mipsel.
2007-05-30 21:14:35 +00:00
xtraeme