cbac3515fc
xref mount_ntfs(8) in SEE ALSO
1999-08-08 04:40:18 +00:00
180bbfd871
Move two functions from rf_strutils.c into rf_configure.c, removing
...
the need for rf_strutils.c.
1999-08-07 23:48:11 +00:00
fac3e3fdcf
* put new BUGS section instead of CAVEATS, which explicitely warns NTFS
...
is experimental and should be used with extreme caution
* give credit to christos & me for the NetBSD port
1999-08-05 15:45:01 +00:00
95d53bad01
Fix PR7747: umount -R dumps core
...
(fix by Ronald Khoo from PR applied)
1999-08-02 02:40:38 +00:00
c71139914f
s/on device/in [dirname]/, to be a bit clearer...
1999-08-02 00:33:01 +00:00
398c91fa04
Adjust column-sizing code to keep output in 76 character lines, so output
...
doesn't wrap in sysinst.
1999-07-30 17:44:01 +00:00
6205a5ed9e
don't use the result of a readdir() after closedir(), from
...
Christian Groessler per PR bin/8107
1999-07-30 15:56:58 +00:00
958ed46f74
Collect all little usage-messages spread around into one place,
...
and as a side effect, print the available commands (and their
usage) if no command is given on the command line.
Approved by Jason Thorpe.
1999-07-30 02:29:04 +00:00
76a67357f0
fix alignment problem of SIOCGIFCONF, on 64bit arch.
1999-07-29 15:40:48 +00:00
47a0fd892a
sync with recent KAME.
...
- warn if net.inet6.ip6.accept_rtadv=0 (the command has no use in this case)
- conformance to RFC2461: obey declared timing constants more strictly
1999-07-29 09:57:58 +00:00
fbff06b0ef
Replace the existing version of nologin(8) with a rewrite that was done
...
according to the behaviour documented in the manual page. That way, the
copyright notice can be dropped.
I place the rewritten version into the public domain. Fixes PR 5784.
1999-07-27 03:56:13 +00:00
c483de17ca
Make the previous actually compile.
1999-07-26 19:38:36 +00:00
0717bdfdf2
cleanup error message
1999-07-26 12:00:47 +00:00
870447b902
don't allow destination addresses to be set for non-Point-to-point interfaces
1999-07-26 11:56:55 +00:00
6b8e92147e
after determining the size of a file being used as a msdosfs, seek back to
...
its start so subsequent writes go to the right places.
1999-07-26 00:28:57 +00:00
30353dfe38
s/makeing/making/ (in a comment)
1999-07-25 05:53:01 +00:00
eda6e4cca4
Address PR bin/7623: if the filesystem is so small (or segment size so large)
...
that not enough segments are available for the second superblock, or to have
MIN_FREE_SEGS free for work room for the cleaner, newfs_lfs will now exit
with an error.
1999-07-22 20:14:29 +00:00
a335a76e3b
s/atoi/strtol/ and check if argument given to -i was really a valid
...
number.
Patch submitted in PR 6456 by lha@stacken.kth.se
1999-07-22 02:04:13 +00:00
03f1e83295
Try $TMPDIR before resorting to _PATH_TMP.
1999-07-21 17:56:34 +00:00
01ec1d5609
Don't try to play games with the BSS; just make it work.
1999-07-21 03:32:53 +00:00
b1e9d43575
Add description of /proc/#/cmdline to mount_procfs.8.
...
Closes PR misc/8021.
1999-07-19 08:02:07 +00:00
9e2ce6114e
tweak IPv6 case so that "route show" does not truncate numeric IPv6 address.
...
PR: 7955
1999-07-17 06:51:27 +00:00
ea4e0f4bc9
- don't core-dump if hints file is too short
...
- unmap the space and close fd's
- bcopy -> memcpy
- stat the file to get the size to map, instead of doing multiple mmaps.
1999-07-16 22:23:29 +00:00
7fa6616468
Address PR 7412: fix newfs_lfs.8 to list all real options for newfs_lfs;
...
also fix newfs_lfs to get rid of all sorts of useless options that applied
only to newfs_ffs. Corrected reference to the FFS paper to the reference
to the BSD-LFS paper.
1999-07-15 19:09:40 +00:00
138dd70b28
From PR-7951 by Joachim Kuebart:
...
Add support for Microsoft Joliet long filename extensions to the
cd9660 filesystem.
1999-07-13 11:12:49 +00:00
d4aa58bc6c
avoid using constants, use #define'd values.
1999-07-12 20:46:15 +00:00
5c0a411355
do not modify BINGRP as there's no reason for.
...
From: tsubai@netbsd.org
1999-07-12 19:02:04 +00:00
8c46b24007
correct typo. s/LDADD/DPADD/
1999-07-12 19:00:52 +00:00
7c564a9ce6
Update to new mount arguments.
1999-07-08 03:04:39 +00:00
dd514ad75e
Incorrect integration. ctime takes a time_t value, not a long.
1999-07-06 23:15:48 +00:00
d1d8f0f73c
do not pass NULL to errx().
...
From: Chris Joness <cjones@rupert.honors.montana.edu>
1999-07-04 15:24:35 +00:00
4cd93a1723
do not bark even if ipsec policy setting for "route flushing 127.0.0.1"
...
ping socket is not successful. it usually means that the kernel is
not ipsec ready, and in that case this should be just okay.
1999-07-04 13:27:03 +00:00
b7ee9c3863
add NetBSD RCS ID.
1999-07-04 02:43:39 +00:00
fab76c80cf
be friendly with non-IPsec kernel.
...
don't exit even if ipsec policy config fails.
1999-07-04 01:11:23 +00:00
9d343b25ca
RCS Id police.
1999-07-03 19:55:03 +00:00
8bfcc5ad34
Add a new -s option to make it easier to test the link-level status
...
(i.e., 10baseT carrier/no carrier) of an interface from scripts
ifconfig -s <interface> will exit with a false status if the interface
reports its unconnected.
-s also works in conjunction with -l and -a, filtering out interfaces
which are reporting down.
Also, add -b (which shows only broadcast interfaces with -l and -a).
I find these options useful in network autoconfig scripts for mobile
systems.
1999-07-03 17:31:15 +00:00
19b055d5a7
0 -> STDIN_FILENO
1999-07-03 15:09:51 +00:00
9a6abc8c5d
s/CFLAGS/CPPFLAGS/ for -D and -I.
1999-07-03 06:26:25 +00:00
c04f585990
stop using __RCSID from UCB comment.
...
Hope this fixes PR 7892.
1999-07-02 17:52:36 +00:00
8ecadeaecd
Build fdisk on bebox and ofppc(replaced powerpc).
1999-07-02 17:48:26 +00:00
565fad43fa
write up IPv6 operations (prefixlen and others)
1999-07-02 15:45:46 +00:00
d211125175
IPv6-ready route command (-inet6 and -prefixlen are added)
1999-07-02 15:29:02 +00:00
8f071200a3
rtsol: Throw IPv6 router solicitation to request autoconfiguration
...
(to be used on end host).
1999-07-02 08:28:04 +00:00
909714f4a5
IPsec support (specify policy on ping - quite useful to test
...
if IPsec is working or not) is added.
1999-07-02 04:53:23 +00:00
011b182801
Fix some printf format problems.
1999-07-02 00:19:44 +00:00
e7d046463f
-D... belongs in CPPFLAGS
1999-07-02 00:04:53 +00:00
62d68abdad
Fix LP64 printf format problem.
1999-07-01 23:59:11 +00:00
bad54b26c6
enable -DIPSEC.
1999-07-01 20:19:35 +00:00
68ad03fe5d
ping for IPv6. try
...
ping6 ::1
on you node.
1999-07-01 19:59:59 +00:00
125cb421d5
Note the default tape device is taken from _PATH_DEFTAPE in /usr/include/paths.h
1999-07-01 19:18:47 +00:00
25eb444e29
make ifconfig IPv6-ready.
...
TODO: update manpage for new options.
1999-07-01 13:19:20 +00:00
fb88e47b54
Remove an extraneous fclose() call which would cause savecore to crash
...
if the bounds file was unwritable (e.g. because /var was read-only).
Fix supplied by Ronald Khoo in PR#7887.
1999-07-01 08:53:35 +00:00
7fe5a79110
Flesh out the manual page, add an examples section, and correct some of the
...
English.
1999-06-28 21:48:13 +00:00
f6e78dac05
Default device is nrst0 not rst0
1999-06-28 01:32:49 +00:00
8847804fc3
Regularize error reporting of mount_* commands for failure of mount(2)
...
to the form:
mount_xxx: dev on dir: reason for failure
1999-06-25 19:28:35 +00:00
9e91c8ebd7
Use ufs_daddr_t instead of u_long, so non-32-bit architectures can clean seg 0
1999-06-24 16:45:14 +00:00
6c3d02c865
Support for ping -a: beep when packet received.
...
Slightly tweaked from version submitted by andrew@untraceable.net in PR7815
1999-06-19 19:15:22 +00:00
3787c5c3d8
MAP_COPY -> MAP_PRIVATE
1999-06-17 21:09:47 +00:00
72a64c5437
add ELF support, mostly from joda@pdc.kth.se (Johan Danielsson) in PR#6149,
...
updated for the symtab support for a.out (non for ELF yet) and other cleanup
by myself. should work on the alpha as well as other ELF ports...
remove the ld(1) output by default, rather than leaving little binary turds
across the filesystem...
1999-06-13 12:54:40 +00:00
bb880545b1
Fix a typo.
1999-06-12 17:17:16 +00:00
eb2854e11b
Use pidfile(3).
1999-06-06 02:00:32 +00:00
a895e91016
Make BSDLFS a EXT2FS-like filesystem, that is, dont print or parse the cpg
...
field.
According to disklabel.h, its LFS semantics are "segment shift" (log2(segment
size)), but in the code it is used nowhere, and there are even plans to
allow non-poweroftwo segment sizes, so it won't ever work.
While at this, simplify the disktab-like output routine... here, currently,
BSDFFS, BSDLFS, EX2FS and ADOS do the same, so don't duplicate the code.
1999-06-04 19:02:34 +00:00
7d344bb51b
Make sure the boot selector actually gets updated if you only change
...
the timeout and/or the default menu choice.
1999-06-04 18:59:15 +00:00
37cb96a063
Print bsize and fsize in disktab-format output also for LFS and ADOS.
1999-06-03 21:15:49 +00:00
85270790c6
Print/parse block size, fragment size and cpg for FS_BSDLFS and FS_ADOS.
...
(cpg has different semantics for LFS and ADOS, but is in use.)
XXX The disktab reading/disktab format output writing needs still to be done.
1999-06-03 20:59:04 +00:00
50f0c49606
On NetBSD/alpha, go out of the way to read the boot area's contents if -r
...
is specified, so that the boot blocks aren't clobbered when writing labels.
1999-06-03 01:58:51 +00:00
a54ad4c40d
kill some bogus comments about -r: it _does not_ cause the boot area to
...
be clobbered. since 4.4-Lite(?) disklabel.c has gone to extra effort
to avoid clobbering the boot area when using -r, but the 4.4-Lite manual
pages were apparently not updated to note that!
1999-06-03 01:49:58 +00:00
9526bd4df7
Patch for PRs 5124, 5535: correctly interpret the gid mapping file, rather
...
than using the last uid map entry for every gid map entry.
1999-06-01 19:16:49 +00:00
3d882ef79b
Remove non-existant option -t from usage.
1999-05-28 10:10:25 +00:00
6f14acdddf
If -c not set on command line and the partition has a non-zero cpg
...
value, use it for the number of cylinders per group. So now the value
in the disklabel does something. :-)
1999-05-19 00:25:59 +00:00
e9d0bd756d
Fix a slight braino in last.
1999-05-18 18:01:08 +00:00
7d4047e4bc
Use the system search path for ntfs headers.
1999-05-17 16:44:53 +00:00
52971adece
Don't force `inet' on status display; get all address families that have
...
configured addresses. From Jun-ichiro itojun Hagino, PR #7593 .
1999-05-17 16:00:05 +00:00
64a1f3885d
Add NOTES section. Indicate that fstype in disklabel should be set to 4.2BSD.
1999-05-16 20:58:49 +00:00
6735cc1a4c
Make newfs's spare superblock output nicer. Figure out how wide the
...
largest block number will be, and make the columns wide enough for it. Then
make enough columns to fit in an 80 character window.
Samples: small end & faked up values:
super-block backups (for fsck -b #) at:
32, 176, 272, 416, 512, 656, 752, 896, 992, 1136, 1232, 1376, 1472,
1616, 1712, 1856, 1952, 2096, 2192, 2336, 2432, 2576, 2672, 2816, 2912, 3056,
3152, 3296, 3392, 3536, 3632, 3776, 3872, 4016, 4112, 4256, 4352, 4496, 4592,
For a 155 GB fs we have:
super-block backups (for fsck -b #) at:
128, 65792, 131456, 197120, 262784, 328448, 394112,
459776, 525440, 591104, 656768, 722432, 788096, 853760,
919424, 985088, 1050752, 1116416, 1182080, 1247744, 1313408,
1379072, 1444736, 1510400, 1576064, 1641728, 1707392, 1773056,
...
317462144, 317527808, 317593472, 317659136, 317724800, 317790464, 317856128,
317921792, 317987456, 318053120, 318118784, 318184448, 318250112, 318315776,
318381440, 318447104, 318512768, 318578432,
Now it actually looks like someone's thought about making large fs's. :-)
1999-05-14 22:36:50 +00:00
17371dd632
Make this compile...
1999-05-06 16:08:54 +00:00
0dd3286354
Add mount_ntfs
1999-05-06 16:05:26 +00:00
67e9632a62
Import yesterday's FreeBSD mount_ntfs source
1999-05-06 16:05:21 +00:00
3a1d0ae5c7
Avoid byte overflow in block estimate for large files
1999-05-05 16:53:46 +00:00
563aff8153
Add a 'chain' command in interactive mode that allows you to vary the
...
size of the partitions, while the starting point gets adjusted automagically.
This chaining works for partitions that are not 'unused'.
1999-05-03 09:45:01 +00:00
6a2c64449b
Sanity check the drive number in %dl and use it instead of blindly
...
assuming disk 0.
1999-05-02 13:48:30 +00:00
7d18a1432b
Tighten check for bad drive numbers to avoid passing garbage to the
...
2nd stage loader.
1999-05-02 12:20:01 +00:00
c0042f7871
Because of space constraints, error messages got shortened. Reflect this
...
in the manual page.
1999-05-02 12:18:40 +00:00
cbf8e59c01
Make check if we need int13 extensions for the bootselector more correct.
1999-05-02 12:17:48 +00:00
5a48cda98a
Remove confusing entry about cylinder boundaries.
1999-05-02 12:17:13 +00:00
255793452f
Since fdisk/mbr contains a man page, we need to descend into it regardless
...
of which ${MACHINE} we are.
1999-05-02 04:42:47 +00:00
69741f8d3d
Fix typo.
1999-05-01 20:04:14 +00:00
855480012b
Invert the meaning of -s, from "don't load symbols" to "load symbols".
...
Document that this is expensive (and why) in the BUGS section.
1999-04-30 18:32:01 +00:00
8eeaf82ae4
- Use the proper multiply instructions so that we don't get truncated.
...
- Fix comparison, which did not work before.
1999-04-30 15:29:44 +00:00
e8dacca7c3
STRICT_ALIGNMENT only applies to the start of partitions, not length.
1999-04-30 04:46:50 +00:00
144e7d3345
Remove duplicate paragraph. Closes PR/7498 by Geoff C. Wing.
1999-04-29 21:53:08 +00:00
e312a3c208
Fix disklabel -t to work with disks that don't end on a cylinder. Before it
...
wasn't adding a "su" entry, so when the disktab was read, the sectors per
unit was initialized to "nc"*"sc" which was wrong.
Fixes PR/7446 reported by Matthias Buelow <mkb@altair.mayn.de>.
1999-04-29 19:12:07 +00:00
a6f7895b92
Only use int13 extensions if the sectors can not be read through the
...
older CHS interface. This works around stupid BIOSs who report that
int13 extensions are present and functional, but fail when you actually
use them. Like Adaptec SCSI BIOSs.
For the bootselector, there was no space to get the CHS info from
the BIOS. Instead, use a flag that can be set by fdisk. fdisk will
set it if one of the partitions on the disk is out of CHS reach
for this disk/BIOS, so that the bootselector will use int13 extensions.
This isn't so bad, because it needs to be configured via fdisk anyway.
Change the mbr manualpage to reflect some shorter error messages.
1999-04-28 23:27:01 +00:00
2969961420
Allow partitions to extend to the end of the disk, even when
...
STRICT_CYLINDER_ALIGNMENT defined. This allows existing valid disklabels
to work (including those generated by sysinst).
1999-04-26 02:05:46 +00:00
ae3b9e217c
add a -D line to usage().
1999-04-26 01:02:25 +00:00
4a22f0e03d
Fix entry point parsing if output file specified to modload (PR7352)
1999-04-23 17:47:02 +00:00
6d094b5b76
Copy code across from newfs so that 'fsck sd0a' and similar will work.
1999-04-22 04:20:53 +00:00
fb524f3e3b
one-line copyright message
1999-04-17 17:55:13 +00:00
48c1c25ba5
Make the bootselector configurable by fdisk. Add a -B flag to this
...
effect (i386 only of course). Also change one branch in the
bootselector code to an explicit 16 bit one, and check both
the boot menu and partition tables to see if the partition
requested by the user should be booted. This check just in case,
should the bootselector menu and partition table get out of sync
somehow. (mmm, bytesqueezing)
1999-04-17 01:38:00 +00:00
6299fb0813
Correct nokerninfo tty flag being left set in most error cases.
...
Closes PR/7388 by Dave Huang <khym@bga.com>.
1999-04-17 01:17:15 +00:00
jdolecek