1227a240f1
driver for Prolific PL2303 serial adapter.
...
I/O DATA USB-USAQ2 work.
2001-01-23 01:24:10 +00:00
69fd9caaae
Don't IFQ_SET_READY() -- this driver isn't ALTQ'ified.
2001-01-22 21:38:35 +00:00
7090ce901d
Defer stopping the interface on error to a process context.
...
XXX The cue changes have not been tested, since I don't have a cue adapter.
2001-01-21 22:09:23 +00:00
dfa2282053
Change watchdog routine. (From FreeBSD.)
...
The only thing stopping us from getting totally rid of the evil
USBD_NO_TSLEEP hack is the (broken) assumption in the MII driver that
registers can be read and written without a process context.
2001-01-21 19:42:29 +00:00
2a7443922d
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 19:36:31 +00:00
aa75661373
Use the new usb_add_task() call to execute the statistics gathering.
...
This gets rid of the evil USBD_NO_TSLEEP hask from the cue driver.
2001-01-21 19:30:35 +00:00
996efaa78c
Ad a comment.
2001-01-21 19:00:29 +00:00
df20cb2972
Change the operation of the USB event thread. Before it only performed
...
USB device discovery, now it can also perform (short) tasks for device
drivers that need a process context, but don't have one.
This is not pretty, but better than using busy-wait in an interrupt context.
2001-01-21 19:00:06 +00:00
d8f68f3949
Add a quirk for devices that cannot handle full length INQUIRY.
...
From FreeBSD.
2001-01-21 18:56:38 +00:00
8502ed9498
Remove `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:55:11 +00:00
e391b64407
Change watchdog code (from FreeBSD).
2001-01-21 16:06:48 +00:00
1d6d81b317
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 16:03:11 +00:00
25c15e3189
Regen.
2001-01-21 15:58:01 +00:00
f4f53b10ea
Another hub.
2001-01-21 15:57:41 +00:00
b2245c50fc
Several changes:
...
* Get rid of `#ifdef FreeBSD'; they seem to maintain their own version.
* Change watchdog code (from FreeBSD).
* Get rid of the horrible USBD_NO_TSLEEP hack.
* Repair some const damage.
2001-01-21 15:55:05 +00:00
e8db629494
Add code to use soft interrupt to handle USB interrupt processing.
...
Don't enable the code since it doesn't work with the kludgy Ethernet drivers.
2001-01-21 02:39:52 +00:00
0c40fe5115
Ad define for warm boot rev.
2001-01-21 02:35:31 +00:00
29984607e8
Trim space off both ends of device product and vendor strings.
2001-01-21 02:34:34 +00:00
8894e84df0
Use a better way to test if we are cold starting the device. (From FreeBSD)
2001-01-21 02:33:52 +00:00
60708ce539
Regen.
2001-01-21 02:28:55 +00:00
27293db05d
A couple of new devices (from FreeBSD).
2001-01-21 02:28:30 +00:00
227c27096f
Add some initialization to struct ifnet that seems to have become
...
necessary.
2001-01-21 02:22:27 +00:00
1aca8405a5
Cosmetic changes.
2001-01-21 00:07:13 +00:00
f7dc96fe4c
Change some splusb() to splhardusb().
2001-01-20 23:36:02 +00:00
541fa6ecfa
regen
2001-01-20 20:53:34 +00:00
2d5b0a4ff5
typo fix
...
reported by kei_sun@ba2.so-net.ne.jp
2001-01-20 20:53:07 +00:00
88e7f62500
regen
2001-01-19 17:28:58 +00:00
ee8a058b1d
add USB serial adapter
...
I/O DATA USB-RSAQ2 (use PROLIFIC PL2303 chip)
2001-01-19 17:28:15 +00:00
e07a5ff574
constify
2001-01-19 08:54:21 +00:00
79c6c8ec3f
Make this compile again after const-ification.
2001-01-19 04:01:10 +00:00
34c8ae80da
constify
2001-01-18 20:28:15 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
1d25789f34
Update with recent files.
2001-01-16 11:54:13 +00:00
6fe782cff1
Use the real Y@P firmware. Permission granted by Kamal Parmar,
...
<kamal@siliconportals.com>, at Silicon Portals.
A big thanks to Silicon Portals for being cooperative (unlike many USB
device vendors).
2001-01-16 03:10:09 +00:00
2ed1e48455
List two USB MIDI I/Fs; YAMAHA UX256 and Roland UM-1.
...
These devices, however, aren't conforming to USB-MIDI class spec.
BTW, here is very experimental version of the driver for these devices:
http://www.imou.to/~AoiMoe/UNIX-at-Random/garbage/umidi-2001-01-15.diff.gz
2001-01-15 20:26:46 +00:00
845a2d5b53
Fix comment typo.
2001-01-15 03:52:03 +00:00
8fcc8721da
Put the UQ_ASSUME_CM_OVER_DATA quirk back in. Without it, the Ricochet GS modem fails to work even with the other changes.
2001-01-11 20:35:02 +00:00
35e36fee18
Add USSCANNER_DEBUG
2001-01-11 06:33:51 +00:00
d03f7a8f4b
Mention that I found protocol info in the Linux driver.
2001-01-11 06:33:22 +00:00
7d90b0cb9c
Note that I got information about the protocol from the Linux driver.
2001-01-11 06:20:04 +00:00
8765aa2c42
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol.
...
Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's
not visible in the driver).
Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for
testing.
XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 06:00:31 +00:00
e6616f532a
Cosmetic changes.
2001-01-08 20:21:16 +00:00
e90b26477e
Regen.
2001-01-07 14:47:00 +00:00
6d5a1918f8
Add Epson 1640 scanner. (From FreeBSD)
2001-01-07 14:46:31 +00:00
5b6d98341e
Try both the old (wrong) and new SOFT_RESET request type.
2001-01-07 14:26:19 +00:00
94094c44ab
Change debugging output a little.
...
Don't the for the wrong id when UMASS_DEBUG is set.
2001-01-06 12:14:39 +00:00
f6f8ab2d11
Don't #define UAUDIO_DEBUG here.
2001-01-06 12:12:24 +00:00
f73703a4a6
Set the play and record parameters separately.
...
If the device is unidirectional, just ignore parameters in the other direction.
(XXX We need a better way of dealing with this.)
Only set curaltidx if we're setting usemode.
This makes both the Altec Lansing speaker set and the Telex bidirectional frob
work again.
2001-01-04 07:05:00 +00:00
c142ce184b
Several things:
...
* Only match an alternate which is in the same direction.
* Use 16-bit ulaw and alaw conversions for output, if possible.
* Store the interface handle in the `alternate' table, so we use the right
interface when creating pipes for devices with both play and record.
Record doesn't seem to actually return any data from the Telex frob, but at
least it doesn't crash or return EIO now.
XXXXXXXX
This is a big f*cking hack. Play and record need to be separated completely
if this code is ever going to even pretend to support full duplex.
2001-01-04 06:20:49 +00:00
6ff81e44ec
No really, this is half-duplex for now. Lame.
2001-01-04 05:25:24 +00:00
ab1d9b87b0
Make some vague attempt to handle devices that do both input and output. This
...
probably needs more work, but at least my Telex frob can play music now.
Also, AUDIO_DEBUG -> UAUDIO_DEBUG.
2001-01-04 03:53:09 +00:00
c2b9d052ba
Cosmetics.
2001-01-02 23:08:54 +00:00
3ea054452a
Add placeholder for firmware.
2001-01-02 22:38:51 +00:00
0e9ef4adc0
Forgotten commit for EZ-USB loader.
2001-01-02 22:24:00 +00:00
32e4d7004e
Add a transient driver for the YAP phone that downloads firmware into
...
the EZ-USB chip. After downloading the firmware the device detaches
and then reattaches as a composite device (audio + HID).
XXX For now there is no firmware committed since the vendor (Silicon
XXX Portals) has not yet agreed that we can redistribute their firmware.
2001-01-02 18:52:44 +00:00
5b86e8bfa8
Add subroutines to download firmware into Cypress (formerly Anchor)
...
EZ-USB chips.
2001-01-02 18:49:56 +00:00
f586756bcf
Regen.
2001-01-02 09:53:16 +00:00
d3fd188459
Add a new TI hub chip.
2001-01-02 09:52:55 +00:00
8afb11bb20
Don't match on a bunch of scanners that should be handled by a
...
different driver.
2001-01-01 18:52:05 +00:00
47c95db1c3
Regen.
2001-01-01 18:51:08 +00:00
f33102e85d
Add another scanner.
2001-01-01 18:50:42 +00:00
9a52f80f0f
Make the controller survive suspend/resume. Thanks to Steve Woodford
...
<steve@mctavish.co.uk> for testing.
2000-12-31 14:29:54 +00:00
271adbd54e
Try to get rounding right when setting mixer values.
2000-12-29 14:49:28 +00:00
560f4a2254
Set the mixer delta field.
2000-12-29 13:28:41 +00:00
34ee8a0f06
Supply our own report descriptor (from Nick Hibma) for the Wacom Graphire.
...
The descriptor it reports is broken.
XXX Not tested, because I don't have the device.
2000-12-29 01:47:49 +00:00
79f0bd6e1f
Update many URLs.
2000-12-29 01:24:55 +00:00
e9853f047a
Update location of specs.
2000-12-29 01:14:15 +00:00
20d1ae1adb
Add two more quirks:
...
UQ_AU_NO_FRAC for audio devices that cannot handle adjustment for fractional
sample size.
UQ_AU_INP_ASYNC for input devices that claim to be adaptive, but are in fact
asynchronous (an easy mistake to make unless you read the specs carefully :)
2000-12-28 11:56:22 +00:00
1e0da50daa
Regen.
2000-12-28 11:53:25 +00:00
bdcc0b7ad1
Add device no for YAP phone with firmware loaded.
2000-12-28 11:53:01 +00:00
4dbac77503
#define for USB_2_0
2000-12-28 10:40:36 +00:00
5236b76556
Make message about ignored endpoint a little clearer.
2000-12-28 01:01:42 +00:00
d2098567fe
Add audio terminal types.
2000-12-28 00:29:58 +00:00
19c0d40186
Even stubs need improvements.
2000-12-24 06:42:34 +00:00
63fbac9a7d
Add some placeholders for the EHCI (USB 2) driver.
...
Don't get your hopes up. I've not even finished reading the
(100+) page spec, and I have no hardware.
2000-12-24 06:39:01 +00:00
9efc721402
Don't use atapi_print since if there are no wdc's, it won't be present.
2000-12-18 19:57:47 +00:00
3bd1aace1b
Add missed le32toh() in uhci_device_isoc_abort().
2000-12-18 15:55:30 +00:00
d1c538bc2f
Don't repeat 'host controller halted' message. From OpenBSD.
2000-12-16 16:09:24 +00:00
71cbcad899
ALTQ'ify.
2000-12-14 07:51:36 +00:00
34bb7b9a35
Don't try to access a device that is being disconnected when generating
...
the detach event. Fixes (I hope) PR 11713 from itohy@netbsd.org (ITOH Yasufumi).
2000-12-13 04:05:14 +00:00
eb210eda08
Make the ohci driver not hang suspend/resume. It still doesn't resume
...
correctly. From itohy@netbsd.org (ITOH Yasufumi) PR kern/11714.
2000-12-13 03:09:06 +00:00
4df48420a1
Another Ethernet device. From nagae@tk.airnet.ne.jp in PR kern/11711.
2000-12-13 02:49:22 +00:00
9214be27c3
Regen.
2000-12-13 02:48:25 +00:00
9e199a03e6
Add another Melco LUA-TX device.
2000-12-13 02:47:26 +00:00
c5293456da
Adapt to bpfattach() changes, and further centralize the bpfattach()
...
and bpfdetach() calls into link-type subroutines where possible.
2000-12-12 18:00:22 +00:00
6e11678a15
Get rid of UQ_ASSUME_CM_OVER_DATA quirk; it's handled differently now.
2000-12-11 05:41:00 +00:00
0db3a835e2
regen
2000-12-08 08:13:45 +00:00
313bdadaa7
add STSN internet access device (no driver yet)
2000-12-08 08:13:34 +00:00
e5de940d42
Add a DIAGNOSTIC message.
2000-12-08 02:33:44 +00:00
330a5e12fa
Don't call ether_ifdetach since we're not an ether driver.
2000-12-08 02:24:07 +00:00
dfd78cfc78
Set the debug level to 0.
2000-12-08 01:53:44 +00:00
28ca8986f0
Regen.
2000-12-07 01:02:42 +00:00
2532d95d53
Add an Atmel hub and a Logitech mouse.
2000-12-07 01:02:12 +00:00
80a6068f99
add I/O Data USB-ET/T (which uses KL5KUSB101B) to the list
...
Patch sent in kern/11635 by ORI Manabu
2000-12-06 21:44:08 +00:00
08ab4a9ad7
regen
2000-12-06 21:39:28 +00:00
c3dbd34e68
add I/O Data USB-ET/T id, sent in kern/11635 by ORI Manabu
2000-12-06 21:38:03 +00:00
f680fa762c
Make sure to increment reference count while the (lengthy) opening
...
operation is happening so we don't lose on disconnect.
2000-12-05 14:01:33 +00:00
d801d9ec2b
Regen.
2000-12-05 03:12:47 +00:00
d604cf563b
Add another Epson printer.
2000-12-05 03:12:11 +00:00
0a739c7166
A portability define.
2000-12-04 03:38:56 +00:00
f4d0a8c54a
Regen.
2000-12-04 03:37:07 +00:00
e2925e0555
Add YAP Phone.
2000-12-04 03:36:42 +00:00
7ec52ba411
Improve a debug message.
2000-11-26 21:05:02 +00:00
88bf6139e5
Regen.
2000-11-26 21:04:43 +00:00
63dfc5b570
Add an Intel camera (rfom OpenBSD).
2000-11-26 21:04:20 +00:00
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
efadefb53f
In uhci_intr(), only warn about power state confusion if the
...
interrupt was actually for us.
2000-11-22 05:50:59 +00:00
6f8985cf15
Regen.
2000-11-21 00:25:04 +00:00
7736bcc821
Add Prolific printer adapter.
2000-11-21 00:24:12 +00:00
ef36370776
Regen.
2000-11-15 14:36:50 +00:00
d57ee8b358
Add Sony memory stick.
2000-11-15 14:36:09 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
1ae6bcbbf0
Acerscan 320U doesn't do strings right. From FreeBSD.
2000-11-14 15:33:04 +00:00
ab324086df
Set the open flag when opening the scanner.
2000-11-14 13:57:16 +00:00
6836c0bd28
Update frlengths after a isoc transfer.
...
Suggested by Yuri <yuri@tsoft.com>
2000-11-10 14:11:49 +00:00
1bfab105b0
Don't try to set CM_OVER_DATA feature if features cannot be set.
...
From Ryutaroh MATSUMOTO <ryutaroh@ss.titech.ac.jp> in PR # 11428.
2000-11-10 14:08:32 +00:00
0510b1739c
Update documentation link. From OpenBSD.
2000-11-10 13:53:23 +00:00
9a10107274
Some OpenBSD defines. From aaron@monkey.org
2000-11-10 13:52:28 +00:00
f3030960da
Add quirks for a Fuji camera.
2000-11-04 15:54:36 +00:00
9702e75aa1
Sync with FreeBSD: Add a scanner. Fix a pasto.
2000-11-03 04:00:15 +00:00
507aaec04c
Adapt to the new line discipline scheme.
2000-11-02 00:01:44 +00:00
a675063a0d
Add a hack to try and figure out if the TI UTUSB41 hub is bus powered
...
despite claiming to be self powered (it's important to know so that the
power budget can be met).
2000-10-24 15:01:26 +00:00
372ae0a636
The all time favourite hub, TI UTUSB41, doesn't report power right. :(
2000-10-24 14:57:35 +00:00
5cc8d65338
Adda quirk for hubs that do not report bus powered status in a normal way.
2000-10-24 14:56:09 +00:00
94e36acb29
Tell usbd_set_config_no() to be verbose. It's nice to know whyit fails.
2000-10-24 14:53:59 +00:00
71fc3f6ee2
Regen.
2000-10-24 14:51:51 +00:00
963138bceb
Add Apple's cool new mouse.
2000-10-24 14:51:24 +00:00
7817cc2ba7
another Ricochet quirk, this time a well-known one. No device strings are provided from it.
2000-10-24 03:59:16 +00:00
365f7337ea
make ucom into a random source, type TTY
2000-10-22 19:01:44 +00:00
eb27dda01d
Add a new quirk: ASSUME_CM_OVER_DATA.
...
Set this on the Metricom Ricochet GS USB modem.
This particular modem breaks if the USB command to enable the feature
CM_OVER_DATA. Since it appears to wake up in that mode already,
just pretend it is already on, and don't try to set it.
Since this commit is happening over my Ricochet modem, I assume it works
now.
2000-10-22 08:20:09 +00:00
b4bbac9584
add Ricochet GS USB modem
2000-10-15 17:53:17 +00:00
86974d7235
Regen.
2000-10-13 18:16:53 +00:00
67c8e3701d
A bunch of scanners.
2000-10-13 18:16:36 +00:00
764c5e3eea
Recognize HP 5300C.
2000-10-13 16:18:48 +00:00
8abfde6138
Regen.
2000-10-13 16:18:22 +00:00
54480a36e4
Add HP 5300C.
2000-10-13 16:18:02 +00:00
3a05d9ba7b
Avoid empty strings for vendor&product.
2000-10-12 23:11:04 +00:00
4ed4915295
Regen.
2000-10-12 22:51:42 +00:00
0b0fb8e466
Add Kingston KNU101TX Ethernet adapter.
2000-10-12 22:51:20 +00:00
41bb27ce0d
Regen.
2000-10-10 12:38:24 +00:00
1f06d9f822
Another vendor&product code.
2000-10-10 12:38:00 +00:00
8adc2fb7f3
Don't free unallocated pointer in detach (can happen if detach happens
...
before attach has finished).
2000-10-10 12:37:01 +00:00
cc577ca5c6
Regen.
2000-10-08 23:57:10 +00:00
b132b36f4d
Add a few more devices (from FreeBSD).
2000-10-08 23:56:53 +00:00
62fb025c5c
Regen.
2000-10-08 21:26:47 +00:00
447c19ac22
Add another DLINK adapter.
2000-10-08 21:26:26 +00:00
966f1692e1
Don't use a plural `s' if there is only one button.
2000-10-08 20:52:18 +00:00
b6db5a8622
Regen.
2000-10-08 20:51:30 +00:00
3598b417a3
Add a Fuji camera.
2000-10-08 20:51:00 +00:00
7ce859b8d0
Allow 16-bit only speakers to work.
2000-10-05 01:35:07 +00:00
5d4d9ec965
Update with uscanner.c
2000-10-04 02:45:07 +00:00
c068cf3953
Regen.
2000-10-04 02:09:37 +00:00
9d09a17e7c
Add more vendors.
2000-10-04 02:09:07 +00:00
623aae812b
Only probe for drive 0. Fix es problem reported by Nathan Williams
...
<nathanw@MIT.EDU>.
2000-10-03 04:33:03 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
3e401aa14d
upl(4) is a IPv4 only device.
2000-10-01 11:35:28 +00:00
64d672931e
Regen.
2000-09-28 01:27:16 +00:00
6f2ac8aed1
Add a couple of Apple products.
2000-09-28 01:26:49 +00:00
9623e356f0
Recognize Acer 320U.
2000-09-24 03:22:47 +00:00
fc015f6833
Regen.
2000-09-24 03:22:26 +00:00
641ee8fd93
Add another scanner.
2000-09-24 03:21:55 +00:00
d71044b313
Don't give up so easily if the device does not respond properly.
...
Mostly from Nick Hibma (FreeBSD).
2000-09-24 02:08:38 +00:00
f2a2c14d9a
Recognize Sony memory sticks (from FreeBSD).
...
Add timing info in the debug output.
2000-09-23 21:03:00 +00:00
d9c7baa183
Add a way to do control transfers on other pipes than the default pipe.
2000-09-23 21:02:04 +00:00
6417d32d9d
Avoid "bandwidth reclamation" for control transfers. The kue device chokes
...
on it.
2000-09-23 21:00:10 +00:00
c412966bb3
Fix puctuation.
2000-09-23 20:24:47 +00:00
0fab9d10ca
Regen.
2000-09-23 18:42:05 +00:00
a5570006bc
Add some more vendors.
2000-09-23 18:39:41 +00:00
770f6e2ae3
Add RCS Id.
...
The driver initially came from Nick Hibma (FreeBSD), which I forgpt to
mention in my initial commit.
2000-09-23 05:05:31 +00:00
23116295f4
Remove some // type comments.
2000-09-23 04:33:04 +00:00
e832785e4b
Add USB scanner driver.
...
XXX Not tested yet.
2000-09-23 04:32:23 +00:00
4b45dfbb69
Fix a device diconnect bug found by Christian Groessler <cpg@aladdin.de>.
2000-09-22 02:34:58 +00:00
3486500f77
repair multicast filter setup. PR 11037 from Ryoji Kato.
2000-09-20 01:26:14 +00:00
60095a9e92
regen.
2000-09-16 11:46:17 +00:00
de4b3b44f1
delete "128MB"
...
same products number; 32MB,64MB,128MB
2000-09-16 11:45:38 +00:00
8debbc34ab
Change the second argument of tiocm_to_ucom to u_long,
...
since the second argument of ioctl is a u_long value.
2000-09-15 17:03:24 +00:00
c1682ac85d
Recognize Rio 600.
2000-09-14 03:13:21 +00:00
95cbe2c829
Regen.
2000-09-14 03:11:52 +00:00
d28bd1b67f
Ad some new devices and change vendor name from SUPRA to DIAMOND2.
2000-09-14 03:11:23 +00:00
9b8c74f603
regen for trek thumbdrive
2000-09-14 00:04:15 +00:00
494592f30d
Add Trek Technology ThumbDrive (128MB)
2000-09-14 00:02:56 +00:00
8b74873d54
Cleanup the error handling code introduced in rev. 1.26. Commented by jhawk.
...
No functional change.
2000-09-13 05:17:14 +00:00
f7d700a127
Make the control line handling a little better. Avoid a DTR/RTS issue
...
from uninitialized sc_mcr by not calling ucom_{dtr,rts} if possible.
XXX Flow control is still incomplete and needs more work.
2000-09-10 03:10:20 +00:00
6bc11dce71
In ucomopen(), make sure to call splx() before returning
...
when initialization fails.
2000-09-08 07:20:52 +00:00
19f36696bc
ANSIfy last patch.
2000-09-08 01:27:12 +00:00
96d1acf3d6
Add isoc support. From FreeBSD via Berndt Josef Wulf <wulf@ping.net.au>
2000-09-08 00:55:26 +00:00
9a43fc6477
Regen.
2000-09-07 04:00:21 +00:00
006df0f4cb
Add scores of scanners (from FreeBSD).
2000-09-07 03:59:55 +00:00
6c0346a534
Regen.
2000-09-05 22:39:59 +00:00
0b631b84eb
Add a Logitech trackball.
2000-09-05 22:39:16 +00:00
5cf4edb506
Handle output packet headers in a cleaner way. From IWAMOTO Toshihiro
...
<iwamoto@sat.t.u-tokyo.ac.jp>, fixes kern/10573.
2000-09-03 19:15:45 +00:00
b2af314f55
Add a few more defines. From Nick Hibma and FreeBSD.
2000-09-03 19:09:14 +00:00
cf4250b7f3
Add UKBD_DEBUG.
2000-08-24 14:13:38 +00:00
fa9cfe5e39
Removed unnecessary variable declaration.
2000-08-24 14:12:34 +00:00
d08216d4e2
Add a quirk for audio devices that claim to have an extension unit, but it
...
can't be manipulated.
2000-08-24 14:11:09 +00:00
b3b158b922
Implement handling of the UQ_SPUR_BUT_UP quirk. Some keyboards sometimes
...
generate a key up quickly followed by a key down for the same key, so we
take care of that.
(Finally I can type again without going nuts. :)
2000-08-20 22:30:17 +00:00
d9426e06b6
Install usbdevs.h as well.
2000-08-20 22:25:20 +00:00
2af3c25d9d
Regen.
2000-08-17 23:28:00 +00:00
7e5bb38ef2
Add an XXX comment.
2000-08-17 23:18:56 +00:00
2d8b50667e
From FreeBSD: add code for Insystem USB cable.
2000-08-17 23:16:16 +00:00
ichiro