6b513dfe29
Remove ioc_irq_establish -- It wasn't serving any useful purpose.
2001-01-07 15:36:34 +00:00
fb3dd6b589
ANSIfy.
2001-01-07 15:27:37 +00:00
6861904096
Regen.
2001-01-07 15:01:06 +00:00
55c57a573f
Add an Altima PHY.
2001-01-07 15:00:46 +00:00
32ad12527c
ANSIfy.
2001-01-07 15:00:02 +00:00
e90b26477e
Regen.
2001-01-07 14:47:00 +00:00
6d5a1918f8
Add Epson 1640 scanner. (From FreeBSD)
2001-01-07 14:46:31 +00:00
32ff4eef91
ANSIfy.
2001-01-07 14:28:02 +00:00
5b6d98341e
Try both the old (wrong) and new SOFT_RESET request type.
2001-01-07 14:26:19 +00:00
c730bd06be
Un-__P, remove arg names.
2001-01-07 13:48:24 +00:00
5c09bd5fc5
Un-__P and remove function arg names.
2001-01-07 13:38:42 +00:00
218d552c4c
Note ISDN devices.
2001-01-07 13:10:54 +00:00
f68bcbc806
Use ${PRINTOBJDIR}.
2001-01-07 08:38:01 +00:00
e2173eff07
Add some definitions.
2001-01-07 07:29:33 +00:00
781516b080
Only include PROT_EXEC in maxprot if the user specified PROT_EXEC
...
in the mmap() call. maxprot is used to create device mappings,
and always including PROT_EXEC causes the mapping to fail on the Alpha
when mapping a non-RAM offset of /dev/mem (which may be sparse, so
instruction fetch from there is disallowed).
2001-01-07 06:16:46 +00:00
744c012068
Use uvm_aio_biodone instead of uvm_aio_aiodone for top-level buf
...
so that uvmexp.paging is updated if this i/o was initiated by
the pagedaemon.
2001-01-07 05:54:41 +00:00
6795b1b166
No, really, pass the PA to alpha_pa_access(), not the PFN.
2001-01-07 05:42:54 +00:00
c5802f9f90
avoid unused variables if not RASTERCONSOLE
2001-01-07 05:41:50 +00:00
f514e805ed
Move prototypes for mips_user_cachectl() and mips_user_cacheflush()
...
to <mips/cachectl.h>.
2001-01-07 04:13:16 +00:00
7b9c3218e2
Make this C++ safe.
2001-01-07 03:59:31 +00:00
610a127a3d
Fix a stupid = vs == bug that prevented the code working usefully at all.
...
While I'm here, fix all the other GCC warnings too.
2001-01-07 00:30:29 +00:00
fa64805abd
Specify (void) arguments, hence avoiding GCC warning.
2001-01-07 00:07:58 +00:00
46b2a2fcd4
Do ess_config_addr() in the ofisa front end, rather than in the match
...
routine. Prevents problems with non-SCR ess chips, as described in
PR 11630.
2001-01-06 22:50:00 +00:00
a30debae05
Add description of the pinout of a standard DB-25 parallel port,
...
relative to the bits described here.
2001-01-06 17:16:19 +00:00
4152b5b212
Adjust recent netboot fix to work in the 5100 as well.
2001-01-06 16:59:53 +00:00
1c518d67a0
Add WDC_CAPABILITY_SINGLE_DRIVE to ignore secound drive. Wdc on pcmcia will
...
be attached with this flag.
Some CF Card (for ex. IBM MicroDrive and SanDisk) doesn't seem to implement
drive select command. In this case, you can't eliminate ghost drive properly.
So you should use this flag to ignore the ghost by force.
2001-01-06 14:55:49 +00:00
32c62f1fdb
ANSIfy
2001-01-06 13:09:05 +00:00
94094c44ab
Change debugging output a little.
...
Don't the for the wrong id when UMASS_DEBUG is set.
2001-01-06 12:14:39 +00:00
f6f8ab2d11
Don't #define UAUDIO_DEBUG here.
2001-01-06 12:12:24 +00:00
8ce2076cf5
Fix a typo in debug printf.
2001-01-06 06:01:59 +00:00
169563b7c1
#warn is _not_ the GCC CPP directive that gives a warning, #warning is.
...
(this code has, apparently, always been wrong, but current GCC is kind
enough to warn about unknown CPP directives.)
2001-01-06 00:35:54 +00:00
7e14d8a67c
Cosmetics
2001-01-05 23:58:02 +00:00
ebb91e152f
Disable the daic driver for now. It's microcode handling needs
...
some thougths (legal problems), and the driver is not ready
for prime time anyway.
2001-01-05 23:22:01 +00:00
4c176b9806
Disable the daic directory for now, it breaks with OBJDIR builds.
...
This needs more thought.
2001-01-05 23:17:48 +00:00
d7f811d098
utrace(2): limit size of user data to KTR_USER_MAXLEN (currently 2048); return EINVAL if 'len' is bigger
2001-01-05 22:25:26 +00:00
2bd5bf0ec2
regen after utrace() parameter rename
2001-01-05 21:53:38 +00:00
fbc7e223d7
utrace(2): rename 'id' parameter to 'label'
2001-01-05 21:42:08 +00:00
6d92451397
don't keep adding targets, but include bsd.kinc.mk... This time make obj borke.
2001-01-05 20:18:10 +00:00
34875ea7b1
Now let it survive "make install" too.
2001-01-05 19:56:55 +00:00
b90c4c82d9
Make this actually sort-of-work for 68060 w. disabled FPU (tested), 68LC060,
...
and I suspect, 68LC040 and 68040V machines. Method used:
1. do NOT use the frames effective address at all
2. do NOT use the frames next instruction address, but
3. restore the "this instruction" pc into the pc field of the frame at the
beginning of the emulation, if we got a frame format 4.
TODO:
A. find the bug in the usage of the frame EA, and revert to using it.
B. find the bug in the usage of the frames next instruction address, and
consider whether it's worthwhile to use it.
C. make the emulation complete.... FEXP FETOM1, and the trigonometric functions
are missing.
2001-01-05 19:54:30 +00:00
8303e98e40
Fix typo (s/req/reg/).
2001-01-05 19:08:04 +00:00
651aeb5899
don't let "make all" fail
2001-01-05 19:01:02 +00:00
6a808ce8c8
Initialize VIA Technologies' 82C686's ICU as if it were a 82C586.
...
This fixes interrupt allocation problems on modern Compaq laptops.
2001-01-05 18:39:12 +00:00
69153b6b36
Run at Ultra/66 on VIA controllers that can do it. PCI vendor/device/revision
...
is the same for the Ultra/33 and Ultra/66 version, so test writability of
the U66 enable bit (idea from Chris Cappuccio).
Thanks to David Carrel for testings.
2001-01-05 18:04:42 +00:00
52f9536913
Add isapnp devices.
...
XXX CS4232 is not probed properly.
2001-01-05 17:55:38 +00:00
d78ca7c54a
Add isapnp attachment for prep.
2001-01-05 17:49:43 +00:00
cbf42ca2d1
Ops, make it compile again.
2001-01-05 15:34:05 +00:00
3950869204
Set Linux version to 2.0.38 for now, until the clone + "real time signal"
...
problems are fixed.
2001-01-05 15:31:15 +00:00
5c800a0dab
Add support for Ultra/100 on intel ICH2; from Tomokazu HARADA in kern/11747.
2001-01-05 15:29:39 +00:00
2a63f0a46c
Add support for Ultra/100 on the HPT370
...
XXX the datasheet for the HPT370 is wrong
While I'm there clear the DRIVE_DMA flag when we're going to use Ultra/DMA
where it was missed, so that wdc_print_modes() only prints what's used.
2001-01-05 15:20:53 +00:00
bjh21